Uniden BTHS500 User manual

BTHS500
Bluetooth®
Wireless Headset

2
What’s in the box?
Bluetooth Headset 2 x Ear hooks A/C pow
erent size Ear buds Owner's manual
adapter
(Small, Medium, Lar
g
e
)
ge)

3
Getting to Know the BTHS500
W
Multi-Func tion Button
ON/OFF
Button
Charging Port
Status LED
Volume Up Button
Speaker
Volume Down Button
Microphone
Ear Bud

4
LED and Tone Indicators
Status LED Indication
Power On Blue LED blinks 3 times.
Power O Red LED turns on for 2 seconds.
Pairing Mode Blue & Red LED blink repeatedly.
Connectable Mode Blue LED blinks 1 time every 5 seconds.
Connected Mode Blue LED blinks 2 times every 5 seconds.
Active Call Mode Blue LED blinks 3 times every 5 seconds.
Streaming Mode Blue LED blinks 2 times every 5 seconds.
Charging in Progress Red LED turns on.
Charging Complete Red LED turns o.
Status Tone Indication
Power On Turn-on melody
Power O Long Low Beep
Connect 3 Short Beeps
Incoming Call Ring melody
Active Call 2 Rising Beeps
Ending a Call 2 Falling Beeps
Low Battery Low Battery melody

5
Charge the Battery
Before using your BTHS500, charge the battery for at least 2
hours. Charging the battery completely (and keeping it charged)
will help you get the longest possible talk and standby time out
of the battery. (On average, the battery provides about 4 hours of
talk time or music play and about 170 hours of standby time.)
Connect the AC adapter to the CHARGE connector on the1)
side of the BTHS500 (open the rubber cover to access the
connector) and plug it into any standard 240VAC power
outlet.

6
Use ONLY the power adapter supplied with the BTHS500! Using
any other adapter could damage your BTHS500, create a fire
hazard, or cause a risk of electric shock!
While charging the LED will light up red and when charging2)
is complete, the LED will turn o.
General Use;
For optimum charging turn power o before connecting charger.
After charging turn power on and BTHS500 will automatically
seek the previous connection.
If power is on when charger is connected then Bluetooth is
disconnected. After charge press the Multi-Function button
momentarily to seek the previous connection.

7
Changing the Ear-Bud
Choose an appropriate sized ear bud (small, medium or large).
Changing the Ear-Hook
Changing the Ear-Bud

8
Changing the Ear-Hook
Ear hook shown in right ear orientation (for hooking onto the
right ear). For left ear use reverse the Ear hook orientation so the
hook is on the left side.
Changing the Ear-Hook
Changing the Ear-Bud

9
Pair your Phone to the
BTHS500
Power On/ O
Slide the power switch to ON to activate the headset.
Slide the power switch away from ON to power o.
Pairing
Before using the headset, it must be paired with a mobile phone
rst.
Slide the power switch to ON.1.
Press and hold the Multi-Function button for 4 seconds2.
until Blue & Red LED lights ash repeatedly.
Search the headset via your mobile phone. Please follow3.
the instructions of your mobile phone.

10
When you nd your headset,4.
BTHS500, please select it and
conrm by selecting“Yes”or
“OK”
Enter PIN Number‘0000’(45.
zeros).
• SIMPLE PAIRING: If your mobile phone
supports Bluetooth core spec 2.1,
then you don’t need to enter the PIN
number to pair.
• EASY PAIRING: When you power on the BTHS500 for the rst
time, the headset will go into pairing mode immediately.
Input PIN Code
0000
Active Dev List
Model Name
Headset

11
Music Multi-Point
The BTHS500 can connect to one mobile phone for making
and receiving calls (Handsfree Prole) and connect to a second
Bluetooth device (such as an MP3 player or laptop with Bluetooth
A2DP Prole) for streaming music.
(This enables listening to music streamed from the secondary
Bluetooth device while keeping a mobile phone connected on
standby)
IMPORTANT!
The BTHS500 cannot connect to two mobile phones at the same
time for making & receiving calls (Handsfree Prole).

12
Pairing a Second Bluetooth Device to Stream Music
Pair and connect a mobile phone to your BTHS500 following1)
the pairing instructions on page 9.
Follow on from step 2 on page 9 and pair a second2)
Bluetooth device (with A2DP Prole) to your BTHS500.
Turn the BTHS500 o then on again after pairing.3)
Connect your mobile phone.4)
Connect your secondary Bluetooth device, ready to play5)
music.
Using the BTHS500
Turn power on and BTHS500 will automatically seek the previous
Bluetooth connection.
If connection unavailable the BTHS500 will stay in connectable
mode. Press the Multi-function button momentarily to seek the
previous connection again.

13
Make and Receive Calls
Making a call
To dial the Last number;
f
Press Multi-Function once quickly.
To Voice dial;
f
Press and hold the Multi-Function button for 2 seconds.
Once your mobile phone is in voice dialing mode, follow
the steps indicated in your mobile phone’s instructions.
You can de-activate voice dial mode by pushing and
holding Multi-Function for 2 seconds in voice dialing
mode.
Your mobile phone must support voice dialing and have
recorded voice tags before using this function.

14
Answering a call
Press the Multi-Function button briey to answer a call.
Music stops when there is an incoming call, you can hear
the melody.
Reject an incoming call
Press and hold the Multi-Function button for 2 seconds.
Ending a call
Press the Multi-Function button momentarily while you are
on the line.
You can also end a call from your mobile by pushing“END”.
Transferring a call
Headset to mobile phone:
f

15
Press and hold the Multi-Function button for 2 seconds.
Mobile phone to headset:
f
Press and hold the Multi-Function button for 2 seconds.
MIC Mute
Press and hold volume down for 2 seconds. MIC mute
will then be activated. You can hear the status indication
melody every 5 seconds in MIC mute mode.
You can de-activate MIC mute by pushing and holding
volume down for 2 seconds.
Call waiting (3-way calling)
Before you use 3-way calling function, please make sure
that your mobile phone supports“Handsfree prole”. And

16
please check with your network operator if they support
Call hold & Multiparty call service.
Connect to incoming call & disconnect your current call.
f
- Press and hold volume down for 4 seconds.
Put your current call in waiting mode and receive
f
incoming call.
- Press and hold volume up button for 4 seconds.
[TIP] You can also activate Call waiting mode by pushing “Send”
on your mobile phone
Reset the Headset
First disconnect any active connection from mobile phone and/
or MP3 player. BTHS500 will show connectable status, blue LED
blinks 1 time every 5 seconds.

17
Press and hold the Multi-Function & Volume Down buttons for 3
seconds, blue LED will blink 5 times.
All device information and the call list of your headset will then
be reset. Turn power o. When next time BTHS500 is powered on
the headset will go into pairing mode immediately.
How to play music
To play music through the BTHS500 just play music on your
mobile phone or secondary Bluetooth Device (with A2DP) as
usual. Control the playback from your mobile phone or MP3
player as usual or use the BTHS500 controls as follows.
Play music
Press and holdVolume Up for 2 seconds.1.

18
Music stops when there is an incoming call, after the call2.
ends, music resumes automatically.
Music pause
Press and holdVolume Up for 2 seconds.1.
Press and holdVolume Up for 2 seconds again, music2.
resumes automatically.
Stop
Press and holdVolume Down for 2 seconds while
f
listening to music or while in pause mode.
Skip to Previous Song
Press and holdVolume Down for 4 seconds.
f
Skip to next Song
Press and holdVolume Up for 4 seconds.
f

19
Specications
Bluetooth Core Spec Bluetooth Specication 2.1+EDR
Prole HSP, HFP1.5, A2DP, AVRCP
Carrier Frequency 2400 MHz to 2483.5 MHz
Modulation Method GFSK, 1Mbps, 0.5BT Gaussian
Maximum Data Rate Asynchronous : 2178.1 kbps / 177.1 kbps
Synchronous : 1306.9 kbps / 1306.9 kbps
Bluetooth Class Class 2
Hopping 1600 hops/sec, 1MHz Channel Space
Transmit Power 0 dBm
Coverage Range 10 Meters
Receiver Sensitivity -82 dBm / 0.1 % BER
Continuous Talk Time 4 Hour
Music PlayTime 4 Hour
Standby Time 170 Hour
Weight 10 g
Dimension 18.1(H) * 51.3(L) * 9.5(D) mm
Charging Voltage DC 5.0 ~ 5.3 V
Charging Time 2 Hours
OperatingTemperature -10° to +50°C
Storage Temperature -20° to +80°C
Battery Lithium Polymer 3.7V 90mAH

20
SAFETY AND GENERAL
INFORMATION
Please read this guidebook carefully and follow the1)
instruction.
To avoid any damage or malfunction of the unit, do not2)
drop it from high place.
Keep away unit from humidity, water and any other liquid.3)
And if the unit is exposed by water, moisture and other
liquid directly, then do not turn on and operate it for
avoiding any electrical shock, explosion and damage of the
unit.
Do not place or keep the unit near the heat sources such4)
as direct sun light, radiators, stoves or other apparatus