Uniden BTS200 User manual

BTS200 High-Definition
Speaker
Haut-parleur haute
définition BTS 200
Questions? Problems?
Get help on the web at www.uniden.com
or call our Customer Service line at 800-292-2294.
Questions? Problèmes?
Obtenez de l’aide au www.uniden.com
ou en communiquant avec le soutien à la clientèle au 800-292-2294.
UFZZ01054ZB(0)
© 2011 Printed in Vietnam/Imprimé au Vietnam

2 - English
Table of Contents
Important Safety Instructions .......................3
BTS200 HIGH-DEFINITION SPEAKER .....3
What’s Included...................................................4
SET UP YOUR BTS200 SPEAKER .............5
Install the Battery................................................5
Charge the Battery .............................................5
Turn on Your Speaker ........................................5
Pair Bluetooth Devices to Your Speaker......6
GETTING TO KNOW THE BTS200
SPEAKER ..............................................7
BTS200 Top/Front................................................7
BTS200 Side...........................................................8
BTS200 Back..........................................................9
LEDs ......................................................................10
BTS200 SPEAKER OPERATION .............10
Basic Cell Phone Operations ........................11
Basic Music Operation....................................13
SPECIAL FEATURES ...............................14
Charge Cellphone using a USB Cable ...... 14
Play Music through a Wired Connection.14
Manage SRS WOW HD™ On/O..................15
TROUBLESHOOTING.............................16
Reset your BTS200 Speaker.......................... 17
Battery Features................................................18
SPECIFICATIONS ...................................19
Bluetooth Compatibility................................19
Safety and Handling Information .......19
FCC Notice .............................................20
One-Year Limited Warranty..................21

English - 3
Important Safety Instructions
•Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or
near a swimming pool.
•Do not use this product while driving.
•Use only the power cord indicated in this manual. Do not expose the device to ames or dispose of it in a re: the battery may
explode. Check with local authorities for possible battery disposal instructions.
•Do not disassemble, modify, or attempt to repair any component of this product.
•Check the laws and regulations on the use of mobile phones and hands-free equipment in the areas where you drive. Always give
full attention to driving and pull o the road and park before making or answering a call if driving conditions require.
SAVE THESE INSTRUCTIONS!
is a trademark of SRS Labs, Inc.
WOW HD technology is incorporated under license from SRS Labs, Inc.
BTS200 HIGH-DEFINITION SPEAKER
Uniden’s BTS200 high denition Bluetooth speaker provides clear stereo sound in a
compact, portable package. With Bluetooth V2.1 compatibility, the BTS200 pairs with your
cell phone to become a speakerphone for hands free conversations. You can also connect
your music player (wired or wireless) for crisp, clear audio.

4 - English
•Bluetooth V2.1 + EDR.
•Up to 2 Bluetooth devices can be paired with your speaker.
•Supporting A2DP/AVRCP/HFP proles.
- A2DP: Advanced Audio Distribution Prole
- AVRCP: Audio/Video Remote Control Prole
- HFP: Hands Free Prole
•Rechargeable Lithium-Ion polymer battery.
•Portable
•Up to 5 hours of play from a fully-charged battery.
•Call Waiting feature
•Mute feature
•SRS WOW HD™ : Available when playing music through a 3.5 mm minijack cable (not
included) connection.
The BTS200 speaker is not a data storage device; do not attempt to copy files to it.
What’s Included
•BTS200 Speaker
•AC Adapter (PS-0043)
•Lithium-Ion polymer battery (BT-1026)

English - 5
SET UP YOUR BTS200 SPEAKER
Install the Battery
1. Remove the battery from any protective packaging and discard the packaging
accordingly.
2. Align the battery pack with the guides along the inside of the battery area. Be sure the
contact slots are in the correct position to close on the contacts.
3. Slide the battery in until you hear the latch click.
Charge the Battery
1. Insert the adapter’s DC jack into the DC connection.
2. Plug the adapter into a 120 VAC power supply (standard wall outlet).
3. The middle LED lights to indicate the battery is charging and goes o when complete.
Your battery must be fully charged (more than 7.5 hours) before you can use your speaker.
Turn on Your Speaker
When you turn on your speaker for the rst time, it automatically goes into pairing mode.
The Bluetooth LED ( ) ashes rapidly and is ready to pair (see page 6). The next time you
turn on your speaker, it searches for already paired devices and then moves into a standby
state.

6 - English
1. Press and hold for at least 3 seconds.
2. All LEDs light and a power on tone sounds.
3. and LEDs go out.
4. ashes slowly while looking for Bluetooth devices. It remains steady on when
Bluetooth devices are discovered; otherwise, it goes out.
To turn o the speaker: Press and hold for at least 3 seconds.
Pair Bluetooth Devices to Your Speaker
Pair First Bluetooth Device
Pair your rst Bluetooth device to your speaker when you turn your speaker on for the rst
time. Be sure your speaker is in pairing mode when you pair your second Bluetooth device
(see step 1-2 of “Pair Second Bluetooth Device” on page 7).
1. Select a Bluetooth V2.1 or above device (mobile phone or music player) to pair.
2. Select the Searching mode on your Bluetooth device (refer to your Bluetooth device’s
owner’s manual for details if necessary).
3. Your Bluetooth device should nd BTS200; select it and use 0000 for a pairing code if
necessary.
4. Verify that you are connected to your speaker. The Bluetooth LED ( ) moves to a
steady ON state when pairing is complete.

English - 7
Pair Second Bluetooth Device
1. Turn on your speaker, and continue to press and hold until your speaker beeps
twice.
2. Release . The BTS200 is ready to pair.
3. Follow the same procedures for pairing your rst Bluetooth device (see page 6).
GETTING TO KNOW THE BTS200 SPEAKER
BTS200 Top/Front
Key name Icon Press to ...
Mute
Mute the microphone on your
speaker during a call.
talk
Handle phone calls.
Power
Turn on your BTS200 speaker.
Down
Decrease the volume.
uP
Increase the volume.
Play/Pause
Start, pause, and stop music.
Bluetooth link LED
UP
POWER
Microphone
Battery
Release
MUTE
PLAY/PAUSE
Power LED
DOWN
TALK

8 - English
BTS200 Side
Battery release
latch
Battery
indicator
LEDs
USB portBattery
indicator
button
Use this... To...
Battery indicator button Display the level of power left in the battery through the
LEDs.
Battery Indicator LEDs Display the remaining power level when you press the
battery indicator button (see page 18).
USB port Use the BTS200 battery to charge your cell phone (see
page 14).
Battery release latch Unlock the battery for removal.

English - 9
BTS200 Back
Bass
output
3.5mm Audio In
jack
Power
adapter
input
Use this... To...
Audio In Insert the audio cable’s plug.
Bass output Hear the bass sound.
DC 5.4V Insert the power adapter.

10 - English
LEDs
Icon Status Meaning
Power On (green) BTS200 is turned on and operating.
O BTS200 is turned o.
Bluetooth
Slow blink BTS200 is looking for paired Bluetooth devices.
Fast blink BTS200 is ready to pair to a Bluetooth device.
Steady on BTS200 is connected to a Bluetooth device.
O BTS200 is not connected to a Bluetooth device.
BTS200 SPEAKER OPERATION
Press and hold for at least 3 seconds to turn on your speaker.
The and keys control the speaker’s volume level during cellphone operation and
music playback. Press and release the keys to increase or decrease the volume level one
step at a time. Press and hold and to quickly raise and lower the volume levels.
Your speaker sounds an alert tone when it reaches the maximum upper and lower volume
levels.