Unilever pureit CR5240 User manual

140 ± 1 mm
195 ± 1 mm
Manufacturer: Unilever Hong Kong Limited
Address: 6 Dai Fu Street, Tai Po Industrial Estate, N.T. Hong Kong
Distributed by Cybernetic Generator & Behavior Corp.
Address: 4F, No. 150, Jian 1st Road, Zhonghe district, New Taipei City, Taiwan
Tel: [phone]
Website: www.cybernetic.com.tw
Made in China
Produsen: Unilever Hong Kong Limited
Alamat: 6 Dai Fu Street, Tai Po Industrial Estate, N.T. Hong Kong
Didistribusikan oleh Cybernetic Generator & Behavior Corp.
Alamat: 4F, No. 150, Jian 1st Road, Zhonghe district, New Taipei City, Taiwan
Telp: 02-8226-3775
Situs web: www.cybernetic.com.tw
Dibuat di Tiongkok
Nhà sản xuất: Unilever Hong Kong Limited
Địa chỉ: 6 Đường Dai Fu, Khu công nghiệp Tai Po, N.T. Hồng Kông
Được phân phối bởi Cybernetic Generator & Behavior Corp.
Địa chỉ: Tầng 4, số 150, Đường Jian số 1, Quận Zhonghe, Thành phố Tân Bắc, Đài Loan
Điện thoại: [phone]
Trang web: www.cybernetic.com.tw
sản xuất tại trung quốc Nomor Tanda Pendaftaran : IMKG.2249.10.2020
CR5240
Countertop Dispenser Type RO Water Purifier /
Jenis Dispenser Permukaan Meja Alat Pemurni Air RO /
Máy lọc nước dạng đứng Máy lọc nước RO
Instruction Manual /
Manual Petunjuk /
Sổ tay hướng dẫn

Manufacturer: Unilever Hong Kong Limited
Address: 6 Dai Fu Street, Tai Po Industrial Estate, N.T. Hong Kong
Distributed by Cybernetic Generator & Behavior Corp.
Address: 4F, No. 150, Jian 1st Road, Zhonghe district, New Taipei City, Taiwan
Tel: [phone]
Website: www.cybernetic.com.tw
Made in China
Produsen: Unilever Hong Kong Limited
Alamat: 6 Dai Fu Street, Tai Po Industrial Estate, N.T. Hong Kong
Didistribusikan oleh Cybernetic Generator & Behavior Corp.
Alamat: 4F, No. 150, Jian 1st Road, Zhonghe district, New Taipei City, Taiwan
Telp: 02-8226-3775
Situs web: www.cybernetic.com.tw
Dibuat di Tiongkok
Nhà sản xuất: Unilever Hong Kong Limited
Địa chỉ: 6 Đường Dai Fu, Khu công nghiệp Tai Po, N.T. Hồng Kông
Được phân phối bởi Cybernetic Generator & Behavior Corp.
Địa chỉ: Tầng 4, số 150, Đường Jian số 1, Quận Zhonghe, Thành phố Tân Bắc, Đài Loan
Điện thoại: [phone]
Trang web: www.cybernetic.com.tw
sản xuất tại trung quốc Nomor Tanda Pendaftaran : IMKG.2249.10.2020
CR5240
Countertop Dispenser Type RO Water Purifier /
Jenis Dispenser Permukaan Meja Alat Pemurni Air RO /
Máy lọc nước dạng đứng Máy lọc nước RO
Instruction Manual /
Manual Petunjuk /
Sổ tay hướng dẫn

● The products produced by the Company are provided with special anti-counterfeiting codes (product codes) in the outer case,
body, other locations, which shall be checked carefully. In case of any question, Please contact with local Pureit dealer.
● The Manual is a guidance document for the correct use of this machine. Users shall strictly follow the requirements of daily
inspection to prevent potential injury.
● This machine is installation-free. To ensure the safe and normal use of the machine, please contact the local dealer service
outlets or call the service hotline in time if you have any questions during installation or use.
● The machine is applicable to municipal tap water. It is strictly prohibited to use it beyond this scope.
● If there is any abnormal sound or odor, please unplug the power immediately and contact with local Pureit dealer.
● In case of any machine fault, please cut off the water and power supply quickly and contact with local Pureit dealer. To avoid
faults, dangers or even fire, please do not disassemble, repair or modify the machine by yourself.
● The power line can only be connected to a power supply that matches the rated voltage indicated on the nameplate.
● To avoid injury, please do not carry the machine by pulling the power line, and do remove the upper cover plate and rear cover
plate before handling.
● Please do not use damaged power lines or plugs, or loose sockets.
● If the power line is broken, it must be replaced by a professional from the manufacturer, its service department or similar
department.
● This machine should be placed in a cool and dry place indoors to avoid direct sunlight.
● The machine must not be immersed in water or placed obliquely while using.
● Please do not place any containers containing water, drugs, food, small metal objects or any flammable materials above the
product.
● It is recommended to replace the raw water once a day, keep the surrounding environment clean and clean the raw water
container once every 1~2 days (it is recommended to use special cleaning brush and tableware cleaning agent for cleaning).
● When the product is not used or unattended for a long time (more than 24 hours), please be sure to cut off the power supply
and drain the water in the raw water container and water container. When reusing, fill up the raw water container, start the
machine for water purification until it is drained. It is recommended to drain the purified water from the first barrel of raw water
container and purify water again, otherwise the taste will be affected.
● It is strictly prohibited to use organic solvents such as gasoline to wipe the shell of this machine. Please use wet cloth to wipe
the surface of the machine lightly for cleaning. Do not block the exhaust outlet. Children are not allowed to operate the machine
to avoid scalding by hot water.
● It is normal to have a small amount of water overflowed from the waste water container and returned to the raw water
container, and the filtration system can still filter and purify the water. Please feel free to use it.
● Due to the difference in altitude, voltage and other external environmental factor, it is normal for the normal temperature
water, warm water and hot water from the machine to have some deviation from the actual temperature (the actual temperature
of the hot water produced by this machine depends on the local boiling point, which is lower at higher elevations and higher on
the plain).
● Since the TDS probe of purified water is located at the water outlet of the reverse osmosis membrane, the purified water TDS
displayed during normal operation of this machine refers to the value filtered by the reverse osmosis membrane filter.
While the water still needs to go through the Active carbon fiber filter, purified water container, and other waterways before
getting out from the machine, the actual TDS value of the outgoing water may be different.
● The company will not be responsible for any quality accident caused by using the non-standard gifts or accessories.
● As disassembled packing should be discarded in time, please do not allow children to touch or swallow; please do not allow
children to operate, touch, approach, pull or climb the machine; children and mentally handicapped persons should use the
machine with the help of a guardian.
● When the temperature is low or the machine is not used for a longer time, the temperature of the first cup of hot water will be
low.
● Do not leave the machine if you do not use the quantitative water intake function when getting water, so as not to cause
overflow; to avoid scalding, please do not move the cup when hot water is getting out!
● There might be a few drops of residual water dripping from the hot water outlet after using. To avoid scalding of residual water,
please take the cup carefully after the hot water outlet stops dripping!
● The temperature of warm water could be high if you have got hot water from the machine just now or a few minutes before.
Please protect yourself from scalding.

● To avoid scalding, please ensure that the hot water outlet function has been turned off after using or before leaving the
machine!
● Please press the raw water container in place during installation, otherwise water seepage may occur due to poor sealing.
● A small amount of water will flow out after picking up the water container, and may eventually penetrate into the placing table.
Please clean up in time if there is any.
● Please clean the collected water in the water receiver in time to avoid overflow. The machine cannot be used without the water
receiver.
● When the raw water container is short of water, it is normal for the machine to continue to work for a period of time.
Please add water in time (the machine can be used normally only after the raw water container has been lifted up and then
installed again).
● With the upgrading of the product, some text or patterns in the instruction manual may be different from the real product.
Please refer to the real product!
● The Company will not be responsible for any consequences caused by failure to follow the precautions mentioned above.
● This appliance is not intended for use by persons (including children) with reduced physical,sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
● Children should be supervised to ensure that they do not play with the appliance.
● The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
● If the supply cord is damaged, it must be replaced by your local Pureit dealer in order to avoid a hazard.
● This appliance is intended to be used in household and similar applications such as:
—— staff kitchen areas in shops, offices and other working environments;
—— farm houses;
—— by clients in hotels, motels and other residential type environments.
● Please do not remove or damage the connector of parts to prevent leakage.
● The device will automatic flush the internal waterways when switch on the power supply.
● The heating element surface is subject to residual heat after use, please do not touch to avoid accidental scalding.

receiver
receiver cover
A main unit
The picture is for reference only, and the real product shall prevail
（The picture is for reference only, and the real product shall prevail）
Three filters A manualA water receiver
（CF）
（PPCF）
（RO）
Countertop Dispenser Type RO Water Purifier
CR5240
Instruction
Manual

EN
- 5 -
Assembly and Commissioning
1. Preparation before assembly
2. Assembly process
Step 1:
Open the package and take out the
components; insert the water receiver into
Step 2:
Open the water container cap and lift the
water container up.
Step 3:
RO
Alignment
point
PPCF
Step 4:
3. Debugging method
3.1 Add water at the large volume side of the water container ((no water is added to the small volume side) to the "MAX" level
timely to pour out the rejected water after the small volume side is full and add water at the large volume side.
steps:

timely to pour out the rejected water after the water at the large volume side is full and add water at the large volume side of
the water container.



The digital tube is off in energy-saving mode;
The digital tube is on to display the raw water TDS before purification and the purified water TDS after purification when
touching the "water outlet" button
(Note: TDS refers to the total volume of soluble solids in the water, which can indirectly reflect the water quality.
Generally, the lower the TDS value is, the less soluble salts such as heavy metal ions in the water are, the purer the water
quality is.);
The service life indicator light of the filter is off in energy-saving mode;
The service life indicator light of the filter is on when touching the "water outlet" button:
If the service life indicator light of the filter is white, it indicates that the filter is within the validity period and can be used
normally;
If the service life indicator light of the filter is red and flashes and the buzzer keeps ringing for 2 seconds, it indicates that
the filter is about to expire;
If the service life indicator light of the filter is red and flashes continuously, and the buzzer keeps alarming for 5 times at
the end of each water taking, it indicates that the filter has expired;
Indicator light PPCF represents PPCF filter (Note: melt-blown polypropylene carbon fiber composite filter is abbreviated
as PPCF);
Indicator light RO represents RO filter;
Indicator light CF represents CF filter;
When the water container cap is opened, "water shortage" indicator light is on in white (please check and close the water
container cap);
When the large volume side of the water container reaches the "MIN" level, the "water shortage" indicator light is flash in
white (please add water to the large volume side timely and pour out the "small volume");
When the internal purified water container of the purifier reaches the low level, the "water shortage" indicator light is flash
in blue (please wait patiently for water purification by the purifier)
When the large volume side and the internal purified water container of the water container reach the low level, the "water
shortage" indicator light is flash in white and blue alternately (please add water to the "raw water" side of the water
container timely and wait patiently for water purification by the purifier);
The indicator light of "water purification" flashes during water purification;
The indicator light of "water purification" is off after the water purification is completed;
The "Hot water" indicator light is on when the water temperature is selected as boiling water (about 95 °C);
The "UV" and water-drop indicator light are on when LED UV sterilizer works automatically;

“The temperature of normal temperature water is the inlet water temperature of the tank. Please refer to the real-time temperature of the actual use environment. The temperature
of warm water, the boiling water temperature and the amount of water are based on the laboratory test data under standard test environment, temperature 25 °C, voltage 220 V,
measured at a distance of about 10 mm from the outlet.
Warm water is around 45 °C, The range of deviation is ±5 °C
Boiling water is around 93 °C, The range of deviation is +5 °C/-3 °C
The range of water amount deviation is ±10%
Differences in temperature, altitude, voltage, etc. in the actual operating environment will lead to fluctuations in water temperature and water amount deviation.
The values described above are for reference only. The specific values shall be subject to the actual outlet water.”
● Setting: the default temperature for water taking is normal temperature. Touch the "water temperature" button and the
water temperature indicator light is on in turn: warm water (about 45 °C) - Hot water (about 95 °C) - normal temperature;
● From energy-saving mode to working mode:
"water outlet" buttons are displayed in energysaving mode; touch the "water outlet" button to wake up the screen to enter
the working mode; the TDS digital tube, service life indicator light of the filter , water temperature button, water outlet
button and water volume button are on in working mode, and water can be taken by touch buttons (the purifier will
automatically enter the energysaving mode if there is no button operation after 3 minutes of water taking);
● Get normal temperature water:
Touch the "water outlet" button, the indicator light ring will rotate and flash, then the normal temperature water can be
taken (the default water temperature of the purifier is normal temperature, and the default water volume is large cup volume
(about 500 mL));
● Stop getting normal temperature water:
Touch any button of "water outlet" / "water temperature" / "water volume" to stop water;
● Take constant temperature and volume water:
First touch the "water temperature" button, the water temperature indicator light is on in turn (range: warm water (about 45
°C) - Hot water (about 95 °C) - normal temperature); then touch the "water volume" button, the water quantity indicator
light is on in turn (range: middle cup (about 350 mL) - small cup (about 240 mL) - large cup (about 500 mL)); after setting,
touch the "water outlet" button, and the purifier will produce the water with constant temperature and volume (please read
the "child-lock button and child-lock button indicator light" section for Hot water).
● Stop getting constant temperature and volume water:
Touch any button of "water outlet" / "water temperature" / "water volume" to stop water;
● Forced water discharge function:
Press the "water outlet" button for 10 seconds, turn on the forced water discharge function, and drain the water in the
internal purified water container (with the volume of about 1.5 L) of the purifier (please open the water container cap to
stop the water purification during forced water discharge);
● Unlock:
When touching the "water temperature" button to the "Hot water" water temperature indicator light, the "childlock" button
lights up and flashes; when touching the "child-lock" button to unlock, the "child-lock" button stops flashing, and the
purifier will directly emit Hot water (it is not necessary to click the "water outlet" button again);
● Lock:
After getting the boiling water, the "child-lock" button flashes for 6 seconds. If there is no button operation, the "child-lock"
button will turn off automatically after 6 seconds (at the same time, the "normal temperature" water temperature indicator
light lights up);
● Cancel "child-lock" button:
When touching the "water temperature" button to the "Hot water" water temperature indicator light, the "child-lock" button
lights up and flashes; press the "child-lock" button for 6 seconds to cancel the "child-lock" button; when canceling the
"child-lock" button, touch the "water temperature" button to the "Hot water" water temperature indicator light, and then
touch the "water outlet" button to get Hot water directly; Note: The "childlock" button function is enabled by default to
prevent accidental scald to young children caused by accidental touch; when the user can ensure the safety of getting water
and does not need the "child-lock" button function, the function can be canceled selectively.
● Restore "child-lock" button:
Touch the "water temperature" button and "water outlet" button for 6 seconds simultaneously to restore the "childlock"
button function;
● Setting: the default volume for water taking is large cup volume (about 500 mL), touch the "water volume"
button and the water volume indicator light is on in turn: middle cup (about 350 mL) - small cup (about 240 mL) -
large cup (about 500 mL);

RO
PPCF

Removal method of PPCF and RO: Hold the
middle and lower part of the filter according to
the instructions above the filter label, pull out
about 20° in the direction indicated, and then
rotate to the left to remove the old filter.
Assembly method of PPCF and RO: Hold
the middle and upper part of the filter
according to the instructions above the
filter label, and rotate it to the right after
alignment to install the new filter.
RO
RO
RO RO

- 10 -
After replacing the filter, select the life indicator light corresponding to the replaced filter, press the "water temperature"
button and the "water volume" button for 5 seconds while the indicator light flashes, and the filter life indicator light "PPCF"
starts to flash; at this time, click the "water temperature" button, the "PPCF" light stops flashing, and the "RO" light starts to
flash; at this time, click the "water temperature" button again, the "RO" light stops flashing, and the "CF" light starts to flash;
at this time, click the "water temperature" button again, the "CF" light stops flashing, and the "PPCF" light starts to flash;
repeat in this way.
When a filter life light is flashing, press the "water temperature" button and "water volume" button for 5 seconds again, and
the filter life light turns white. After the filter life reset is completed, the buzzer will sound for 2 seconds, indicating that the
filter life reset is successful.
RO

- 11 -
RO
L
E
N
UVUV
DC24V
Switch power supply
Fuse 16 A
Anti-dry-burning
temperature controller
Temperature
probe
Heating module
Relay
Self-priming
pump
Suction
pump
Combined flushing
valve
Normal temperature water
temperature probe
Raw water quality probe
Purified water quality probe
Water container cap signal
Low water level signal of raw
water container
Low water level signal of
purified water container
High water level signal of
purified water container
UV sterilization light
Control panel
Display operation module
Anti-dry-burning manual
temperature controller
138 °C
148 °C

2000 W-2450 W
- 12 -
* CR5240 is typically 2000 litres of total pure water life under tested condition of 0.01 MPa-0.2 MPa input tap water pressure
and 25±3 °C temperature, and continuous input the tap water under 0-500 ppm TDS, 6.5-8 pH, SDI less than 5, and turbidity
less than 1.0 NTU.
All parameters related to the performance of the product are obtained under standard test conditions, and may vary with
different use condition in the actual process.
* 2000 litres

- 13 -

- 14 -
RO

● Produk-produk yang dihasilkan Perusahaan disertakan dengan kode khusus anti-pemalsuan (kode produk) di kotak luar, bodi,
kartu garansi dan lokasi lainnya, yang akan diperiksa secara saksama. Jika ada pertanyaan, harap hubungi dealer Pureit lokal.
● Manual ini merupakan dokumen panduan untuk penggunaan mesin ini secara benar. Pengguna harus mematuhi ketentuan
dalam Manual Petunjuk secara ketat untuk pengoperasian dan pengawasan harian guna mencegah kemungkinan cedera.
● Mesin ini tidak memerlukan pemasangan khusus. Untuk memastikan penggunaan mesin yang aman dan normal, harap
hubungi outlet layanan dealer lokal atau hubungi nomor hotline layanan jika Anda memiliki pertanyaan apa pun selama
pemasangan atau penggunaan.
● Mesin ini dapat dipakai untuk air leding kota. Penggunaan di luar lingkup ini dilarang keras.
● Jika ada bunyi atau bau yang tidak normal, harap cabut colokan daya segera dan hubungi dealer Pureit lokal.
● Jika ada cacat pada mesin, harap matikan catu daya dan hentikan air segera lalu hubungi dealer Pureit lokal. Untuk
menghindari cacat, bahaya atau bahkan kebakaran, mohon untuk tidak membongkar, memperbaiki atau memodifikasi mesin
sendiri.
● Kabel listrik hanya dapat disambungkan ke catu daya yang cocok dengan voltase standar yang dinyatakan pada pelat
spesifikasi alat.
● Untuk menghindari cedera, mohon untuk tidak membawa mesin dengan menarik kabel listrik, dan mohon untuk melepaskan
pelat penutup atas dan pelat penutup belakang sebelum penanganan.
● Mohon untuk tidak menggunakan colokan atau kabel listrik yang rusak, atau soket yang longgar.
● Jika kabel listrik rusak, maka itu harus diganti oleh teknisi profesional dari produsen, departemen layanannya atau departemen
serupa.
● Mesin ini hendaknya diletakkan di tempat yang sejuk dan kering di dalam ruangan untuk menghindari sinar matahari
langsung.
● Mesin ini tidak boleh direndam di dalam air atau diletakkan secara miring saat digunakan.
● Mohon untuk tidak meletakkan wadah apa pun yang mengandung air, obat-obatan, makanan, benda logam kecil atau benda
apa pun yang mudah terbakar di atas produk.
● Disarankan untuk mengganti air mentah sehari sekali, menjaga lingkungan sekitar tetap bersih dan membersihkan wadah air
mentah setiap 1~2 hari sekali (disarankan untuk menggunakan sikat pembersih khusus dan bahan pembersih peralatan makan
untuk pembersihan).
● Ketika produk tidak digunakan atau tidak diawasi dalam waktu yang lama (lebih dari 24 jam), harap pastikan untuk
mematikan catu daya dan menguras air di wadah air mentah dan wadah air. Ketika menggunakan kembali, isi wadah air mentah,
mulai jalankan mesin untuk pemurnian air hingga terkuras. Disarankan untuk menguras air yang dimurnikan dari barel wadah
air mentah pertama lalu murnikan kembali air, jika tidak rasanya akan terpengaruh.
● Dilarang keras menggunakan pelarut organik seperti bensin untuk menyeka kerangka mesin ini. Harap gunakan kain basah
untuk menyeka permukaan mesin secara perlahan untuk pembersihan. Jangan menutupi ventilasi udara buangan. Jangan izinkan
anak-anak mengoperasikan mesin untuk menghindari luka lepuh karena air panas.
● Sedikit air yang meluap dari wadah air limbah dan kembali ke wadah air mentah merupakan hal normal, dan sistem filtrasi
masih dapat memfilter dan memurnikan airnya. Anda dapat menggunakannya.
● Akibat perbedaan ketinggian dari permukaan laut, voltase dan faktor lingkungan eksternal lainnya, maka normal saja jika air
bersuhu normal, air hangat dan air panas dari mesin agak berbeda dengan suhu sebenarnya (suhu air panas sebenarnya yang
dihasilkan mesin ini tergantung pada titik didih lokal, yang adalah lebih rendah di dataran tinggi dan lebih tinggi di tanah datar).
● Karena pengukur TDS air yang dimurnikan terletak pada saluran keluar air pada membran osmosis terbalik, TDS air yang
dimurnikan sebagaimana ditampilkan selama operasi normal mesin ini merujuk pada nilai yang difilter oleh filter membran
osmosis terbalik. Kendati air masih harus melewati filter serat karbon Aktif, wadah air yang dimurnikan, dan saluran air
lainnya sebelum keluar dari mesin, nilai TDS aktual dari air yang keluar mungkin berbeda.
● Perusahaan tidak akan bertanggung jawab atas insiden kualitas yang timbul karena menggunakan hadiah atau aksesori
nonstandar.
● Sementara kemasan yang dibongkar harus dibuang tepat pada waktunya, mohon untuk tidak memperbolehkan anak-anak
menyentuh atau menelannya; mohon untuk tidak memperbolehkan anak-anak mengoperasikan, menyentuh, mendekati, menarik
atau menaiki mesin; anak-anak dan penyandang cacat mental harus menggunakan mesin dengan bantuan pengawas.
● Ketika suhu rendah atau mesin tidak digunakan dalam waktu yang lama, suhu air panas cangkir pertama mungkin rendah.
● Jangan meninggalkan mesin jika Anda tidak menggunakan fungsi pengambilan air kuantitatif ketika mengambil air, agar tidak
ada luapan; guna menghindari luka lepuh, mohon untuk tidak memindahkan cangkir ketika air panas keluar!
- 15 -

● Mungkin masih ada beberapa tetes air sisa yang menetes dari saluran keluar air panas setelah digunakan. Untuk menghindari
luka lepuh akibat air sisa, harap ambil cangkir dengan hati-hati setelah saluran air panas berhenti menetes!
● Suhu air hangat bisa jadi tinggi jika Anda baru saja mengambil air panas dari mesin atau beberapa menit sebelumnya. Harap
lindungi diri Anda dari luka lepuh.
● Untuk menghindari luka lepuh, harap pastikan bahwa fungsi saluran keluar air panas telah dimatikan setelah digunakan atau
belum meninggalkan mesin!
● Harap tekan wadah air mentah dengan pas selama pemasangan, jika tidak mungkin akan ada rembesan air karena penutupan
yang tidak rapat.
● Akan ada sedikit air yang mengalir keluar setelah wadah air diangkat, dan pada akhirnya mungkin akan menembus meja
tempat diletakkannya dispenser. Harap bersihkan tepat pada waktunya jika ada.
● Harap bersihkan air yang terkumpul di penerima air tepat pada waktunya untuk menghindari luapan. Mesin tidak dapat
digunakan tanpa penerima air.
● Ketika wadah air mentah kekurangan air, mesin yang terus bekerja untuk suatu periode waktu merupakan hal normal. Harap
tambahkan air tepat pada waktunya (mesin dapat digunakan secara normal hanya setelah wadah air mentah diangkat dan
kemudian dipasang kembali).
● Dengan adanya peningkatan produk, sejumlah teks atau pola dalam manual petunjuk mungkin berbeda dari produk riilnya.
Harap mengacu kepada produk riilnya!
● Perusahaan tidak akan bertanggung jawab atas konsekuensi yang timbul karena kegagalan mengikuti tindakan pencegahan
yang disebutkan di atas.
● Penggunaan alat ini tidak dimaksudkan untuk orang (termasuk anak-anak) yang memiliki kekurangan kemampuan fisik,
sensorik atau mental, atau yang kurang memiliki pengalaman dan pengetahuan, kecuali mereka mendapat pengawasan atau
petunjuk mengenai penggunaan alat oleh orang yang bertanggung jawab atas keselamatan mereka.
● Anak-anak harus diawasi untuk memastikan bahwa mereka tidak bermain-main dengan alat tersebut.
● Set selang baru yang disertakan dengan alat harus digunakan dan set selang yang lama tidak boleh digunakan kembali.
● Jika kabel pasokan rusak, maka kabel harus diganti oleh dealer Pureit lokal Anda untuk menghindari bahaya.
● Alat ini dimaksudkan untuk penggunaan di rumah tangga dan pemakaian serupa, seperti di:
—— area dapur staf di toko, kantor dan lingkungan kerja lainnya;
—— rumah tani;
—— klien di hotel, motel dan lingkungan jenis tempat tinggal lainnya.
● Jangan membongkar atau merusak konektor komponen agar tidak terjadi kebocoran.
● Perangkat ini akan otomatis membilas saluran air internal saat menghidupkan catu daya.
● Permukaan elemen pemanas akan memiliki sisa panas setelah digunakan, harap untuk tidak menyentuhnya agar tidak terjadi
luka lepuh karena ketidaksengajaan.
- 16 -

- 17 -
Unit utama
Penutup Tangki Air
Tangki Air
Satu penerima air Tiga filter Manual
（CF）
（PPCF）
（RO）
Countertop Dispenser Type RO Water Purifier
CR5240
Instruction
Manual