Uninet OKIDATA C9600 Series User manual

OKIDATA®C9600 SERIES
EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.uninetimaging.com
OKIDATA C9600 SERIES TONER CARTRIDGE

The Okidata C9600 series toner cartridges are rated for 15,000 pages at 5% coverage. They are compatible with the C9600 and
C9800 machines. The OEM part numbers are the 42918904 Black, 42918903 Cyan, 42918902 Magenta,
and 42918901 Yellow. There is a chip on the cartridge that must be replaced each cycle.
1. On the side opposite the blue handle, press in on the tabs of the end cap. Remove the end cap.
Remove all the old toner from the hopper.
OKIDATA C9600 SERIES EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.uninetimaging.com
REMANUFACTURING THE OKIDATA
C9600 SERIES TONER CARTRIDGES
By Mike Josiah and the Technical Staff at UniNet

2. Fill with new toner for use in Okidata C9600. 3. Replace the end cap.
4. Peel up the colored label. 5. Remove the chip cover, replace the chip.
OKIDATA C9600 SERIES EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.uninetimaging.com

6. Replace the chip cover and label.
OKIDATA C9600 SERIES EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.uninetimaging.com