Unitech HT380 User manual

Package
Please make sure the following contents are in the HT380 gift box.
If something is missing or damaged, please contact your unitech representative.
The basic package contents
HT380 Terminal With Hand Strap
Battery
Power Adapter For Cradle
USB Type C Cable
Cradle
Quick Start Guide
Regulatory Compliance Statements
Optional accessories
Power Cord
- HT380 -
Quick Start Guide
Rugged Handheld Terminal
608349GV1.0
Product View ( Front / Rear View ) Product View ( Left / Right View )
Scan LED indicator
System LED
indicator
Scanner trigger keys
USB / charge
connector
Touch screen
Key pads
B
a
r
co
d
e scanner w
i
n
d
o
w
Autofocus
camera
Battery cover
lock
Speake
r
Flash LED
Hand strap holes
P
ogo p
i
n
f
or c
h
arg
i
ng
NFC

Using the TF Card
Remove / Install the Battery Cover
lock
unlock
Move the battery lock to unlock icon to remove the
battery cover.
Slide and position the battery pack, making sure the
battery contacts are aligned with the contacts in the
compartment.
The HT380 has 1 x TF card slot inside the battery compartment.
Insert the TF card into the corresponding slot and gently push the
card to the correct position.
TF card slot
Checking the LED status
LED LED Light Description
Red light blinks once ￭Barcode scan fail
CAUTION!
 To ensure the unit working properly, please keep all connectors
away from the contaminants staying inside of them such as dust,
grease, mud, and water. The negligence may cause the unit with
no communication, short circuited, overheated and so on.
 If the connector is damaged, please ensure the connector is being
fully repaired before using the unit to avoid causing short circuited.
http://www.ute.com/
Copyright 2019 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Scan LED Green light blinks once ￭Barcode scan good read
Solid green light ￭ When the terminal is operating
Blue light ￭Customizable option
Solid red light ￭Battery charging
System LED
Solid green light ￭Battery fully charged
Charging the Battery
If the battery has been discharged for several days, you
may need to charge for several minutes before powering it
on. Use only the adapter and the USB type C cable that
came with this device to charge the battery.
For other product documentation, please scan the QR code below for
more information.