UPC 4559 User manual

ASSEMBLY INSTRUCTIONS
PARTS BAG UPC #4559 24 Pocket Spinner
Page 1 of 2
PART Quantity Reference
Pockets 24 E
Side Panels 2F
Spinner 1G
Base 1H
Revised 04/24/18
PART Quantity Reference
#8-32 x 3/8” Screws 4 A
Screw Posts 4 B
Ratchet Rivets 2C
Header Clip 2 D
BC
A
1Attach (2) Side Panels (F) to Base (H) and
to Spinner (G) with
(4) #8-32 x 3/8” Screws (A) and
(4) Screw Posts (B).
Connect both Side Panels (F)
of Side Panels (F)
with (2)
Ratchet Rivets (C), though holes at top
.
Note: Side Panels (F) should form the
shape of an “X”.
ASSEMBLY
PARTS LIST
E
F
G
H
F
A
H
G
B
Finished Display
D
C

Page 2 of 2
ASSEMBLY
2Attach Pockets (E) by hooking the tabs into
the vertical slots in the Side Panels (F).
Lock bottom tongue of Pockets (E) into the
horizontal slots on the Side Panels (F).
Each slot holds (2) Pockets (E), one on
each side of the Side Panel (F).
Attach (2) Header Clips (D) where needed.
D
E
F