UPC 65454-A User manual

ASSEMBLY INSTRUCTIONS
UPC 65454-A, 65454-B, 65454-C, 65454-D Menards - Back Lit Sign Display
PART Quantity Reference
New Housing 1A
New Power Adapter 1B
New Power Cord 1C
Revised 09/27/19
TOOLS REQUIRED: #2 Phillips Screw driver, wire cutter
1
Existing Power Supply and
Power Cord should be on lock
out tag out. Remove from Rack.
If not unplugged. Unplug Existing
Power Supply and Power Cord from
power strip and remove from rack.
Remove Existing LED Sign from
Cross Bars and Cut cord on Existing
LED Sign.
Finished Display
REPLACEMENT PARTS ASSEMBLY
PARTS LIST
Thank you for your purchase of one of many fine products designed & manufactured by UPC.
We have made every effort to make your assembly easy, clear & hassle free. For more information
or if you have any questions contact customer service at 1-800-859-7442.
B
C
New Power Supply
Cut Cord
Existing
LED Sign
A
Page 1 of 4
02/14/20
Watch our easy to follow instructional video
www.upcdisplays.com/kidde.html
Lock Out - Tag Out

Page 2 of 4
ASSEMBLY
2
3
- (Refer to Diagram below)
Cut existing Power Cord
and Power Adapter from
current hanging
Back Lit Sign Display.
Remove (12) Plastic Screws with a
Phillips screw driver. Then remove and
retain signage from existing Back Lit Sign
Display. Dispose of existing Housing.
Note: Retain (12) Plastic Screws.
To remove (12) Plastic Screws
unscrew with a Phillips screw driver.
and push from rear.
Cut Cords
Existing Housing
Dispose of
Power Adapter
and Power Cord
AFTER CUTTING!!!
Plastic Screws


A
A
4Place Signage on the (1) New Housing (A) and attach with
(12) Plastic Screws by pushing through signage and
(1) New Housing (A) until it locks in place.
NOTE: Dispose of existing Housing.
G
Page 3 of 4
ASSEMBLY
55
Connect New Power Adapter (B)
to New Power Cord (C).
Hang LED Sign on Cross Bars
using Brackets on back of sign.
Make sure all (4) Brackets are
engaged onto Cross Bars.
B
C
B
C
Brackets
LED Sign
Cross Bars
locked in place
IMPORTANT
GREEN TAPE

Page 4 of 4
ASSEMBLY
Rest Power Adapter Cord (B,C) on top of
Power Strip. Feed cord from LED sign
(E) under store signage and connect to
New Power Adapter Cord (B,C).
8
7Plug New Power Adapter
(B,C) into Power Strip.
Power
Strip Power
Strip
E
B,C
B,C
B,C
Store Signage