URBAN OUTFITTERS Ebba 81801417 User manual

Assembly Instructions
Ebba 3 Drawers Dresser
Page 1 of 3
A) Dresser
x1
B) Left Leg
x1
C) Right Leg
x1
HARDWARE LIST
1) Allen Wrench
[M4] x1
2) Bolt
[M6 x 60mm]x12
3) Wood Dowel
[M10 x 30mm]x4
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips Head Screwdriver
WARNINGS:
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or air
conditioning vents. Adjust levelers so that the furniture sits flat on
uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area. You
may need to re-tighten all bolts after initial use
PARTS INCLUDED

Page 2 of 3
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 1
Insert wood dowel (3) to left and right leg (B & C) as per diagram shown. Align and fasten left and right
leg (B & C) to dresser (A) with bolt (2) and tighten with Allen wrench (1).
A
B
C
1
2
3
A
C
B
Ebba 3 Drawers Dresser
Assembly Instructions

Page 3 of 3
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 2
Adjust leveler to touch the floor.
A
35.04"
30"
18"
30.03"
5.01"
Ebba 3 Drawers Dresser
Assembly Instructions