URBAN OUTFITTERS JONES BOOKSHELF User manual

Page 1 of 3
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
TOOLS REQUIRED BUT NOT INCLUDED:
(a) Screw
[M4x12mm] x5pcs
(b) Screw
[M4x22mm] x12pcs
(f) Screw
[M4x30mm] x1pc
(c) Anchor
[ø6x30mm] x1pc
(d) Washer
[ø12xø5mm] x2pcs
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean,smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Blot spills,do not rub, with a clean,white cloth.
Do not use harsh chemicals.
Before cleaning any part,test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
(e) Strap
[white]x 1pc
AX1 BX1 CX3 DX2 EX3
Phillips-Head screwdriver
JONES BOOKSHELF
Assembly Instructions

Page 2 of 3
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 1. With help, align the brace (D) with the side frames (A) and (B). Insert screw (a). Tighten with screwdriver
(not included)
STEP 2. Align the bars (C) at the locations shown.
JONES BOOKSHELF
Assembly Instructions

Page 3 of 3
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 3. Lay in the shelves (E) as shown. Insert screws (b) from the bottom. Tighten with screwdriver. Do not
over-tighten.
STEP 4. For safety reasons this unit must be attached to the wall to keep it from tipping over. Contact your local
hardware store for the correct anchor for your wall-type. Insert the anchor above the top shelf. Align the strap
as shown and insert screws with washer. Tighten completely.
JONES BOOKSHELF
Assembly Instructions