URBAN OUTFITTERS FLYNN User manual

FLYNN LOW CONSOLE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBANOUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
td
Page 1 of 3
TOOLS REQUIRED BUT NOT INCLUDED: N/A
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area. You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
A) Metal Frame x2
E)
Plastic leveler x4
B) Cross Rail x4
F) Allen Key [3mm] x1
C) Sheet Metal x2
D) Bolt [M5x10mm] x20

FLYNN LOW CONSOLE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBANOUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
td
Page 2 of 3
STEP 1
Lay down all the parts on the clean carpet or cardboard for assembly. Align Metal Frame (A), with Cross Rail (B).
Insert Bolt (D) and partially tighten with Allen key (F). Once all screws are inserted and partially tightened, tighten all
screws completely.

FLYNN LOW CONSOLE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBANOUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
td
Page 3 of 3
STEP 2Insert Sheet Metal (C) with frame. Insert bolts (D), and partially tighten with Allen key (H). Once all screws are
inserted and partially tightened, tighten all screws completely.
STEP 3
Align the other frame with assembled shelf. Once all screws are inserted and partially tightened, tighten all screws
completely. Insert the Plastic levelers (E) on assembled shelf, and place on right position as shown.