URBAN OUTFITTERS MASON 51704369 User manual

Page 1 of 5
MASON MEDIA CONSOLE
Assembly Instructions
TOOLS REQUIRED BUT NOTINCLUDED:
PHILLIPS HEAD SCREWDRIVER
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean,smooth surface such as carpet or cardboard.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills,do not rub, with a clean,white cloth.
Do not use harsh chemicals.
Before cleaning any part,test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
A. Top
1x
B. Left Side Panel
1x
E. Divider
1x
F. Back Panel
1x
C. Right Side Panel
1x
D. Drawer Assembly
1x
24x
I. Lock Washer
1/4”
8x
J. Flat Washer
1/4”
8x
K. Wood Dowel
M8 x 30mm
4x
L. Cam Lock
4x
N.Philllips Screw
5/32” x 5/8”
4x
M. Cam Bolt
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
G. Allen Bolt
1/4” x 1”
8x
O.Allen Key
1x
Rev. 2 06.11.19
H. Allen Bolt
1/4” x 5/8”
6x

Page 2 of 5
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
1. Remove the drawers from the Drawer Assembly (D). Set drawers aside,out of the way. Remember which
drawer is left and right. D
C
B
O
G
IJ
H
O
2. Align Side Panel (B) with the Drawer Assembly (D) as shown. Insert Allen Bolt (G), Lock Washer (I) and
Flat Washer (J). Tighten with supplied Allen Key (O). Insert Allen Bolt (H) into the bottom as shown.
Tighten with supplied Allen Key (O). Repeat for the opposite side with Side Panel (C).
Rev. 2 06.11.19
MASON MEDIA CONSOLE
Assembly Instructions

Page 3 of 5
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
K
M
E
3. Insert the Cam Bolts (M) as shown. Screw clockwise with a Phillips head screwdriver (not included). Press
in Wood Dowels (K) as shown. Press the Divider (E) onto Cam Bolts and Dowels.
4. Insert Cam Locks (L) into the side of the Divider as shown. Make sure to line them up correctly.
L
Rev. 2 06.11.19
MASON MEDIA CONSOLE
Assembly Instructions

Page 4 of 5
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
5. Insert the Cam Bolts (M) as shown. Screw clockwise with a Phillips head screwdriver (not included). Press
in Wood Dowels (K) as shown. Press the Top (A) onto Cam Bolts and Dowels. Make sure all parts align before
pressing rmly.
K
M
A
H
L
O
6. Insert Screw (H) into the sides as shown. Tighten with supplied Hex Key (O). Insert Cam Locks (L) into the
side of the Divider as shown. Make sure to line them up correctly. Turn all cam locks to lock the parts together
with a screwdriver (not included).
Rev. 2 06.11.19
MASON MEDIA CONSOLE
Assembly Instructions

Page 5 of 5
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
7. Align Back Panel (F) with the back of the stand as shown. Insert screws (N). Tighten with screwdriver. Do
not overtighten.
F
N
8. Replace drawers as they came out.
Rev. 2 06.11.19
MASON MEDIA CONSOLE
Assembly Instructions