URBAN OUTFITTERS MABELLE User manual

TOOLSREQUIRED BUTNOTINCLUDED:
MANNER OR CORDLESS SCREWDRIVER
AssemblyInstructions
Do not throw awaypacking materials and carton untilafterassembly.
Assemble all partson a clean smooth surface
CAREINSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat orAirconditioning vents.
Adjust levelers so that the furniture sitsflat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning anypart test a small spot in a hidden area.
You mayneed to re-tighten all boltsafterinitialuse.
PARTS INCLUDED
EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 1 of 3
HARWARDLIST
MABELLEMIRROR
(A)MirrorFrames
Quantity: 1pc (B)Supportrail Quantity: 2pcs
(1) Bolt
M6 x 40mm
Quantity: 8pcs
(2) Allenkey
Quantity: 1pc

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 2 of 3
A
B
MABELLEMIRROR
AssemblyInstructions
STEP 1. Align the Mirror Support Rails
(B) with the back of the Mirror
(A) as shown. Insert Bolts (1)
and tighten with supplied hex
key (2).

EXCLUSIVE AND CONFIDENTIALPROPERTY OFURBAN OUTFITTERS, INC.
©2017 UO,Inc.Allrightsreserved,includingall applicablecopyright, designandpatentrights.
Any unauthorizedreproduction,adaptation,distributionorotherinfringement willbe prosecuted. Page 3 of 3
MABELLEMIRROR
AssemblyInstructions
STEP 2. With help align the mirror to
the back of the case as
shown. Insert Bolts (1) and
tighten with supplied hex key (2).