URBAN OUTFITTERS RYAN COLLAPSIBLE DESK User manual

Page 1 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
RYAN COLLAPSIBLE DESK
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED: N/A
WARNINGS:
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place overheat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
A) Locking caster x2
E) Wrench x1
B) Casters x2 C) Flat Washer x4 D) Wing nuts
[M6] x2
URBAN OUTFITTERS

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 1 of 2
STEP 1
Lay out all parts on a clean carpet or cardboard. Insert flat washer (C) onto casters (A) & (B) and then screw the
casters onto the bottom of the desk as shown.
RYAN COLLAPSIBLE DESK
Assembly Instructions
URBAN OUTFITTERS
STEP 2
Flip the table upright and extend the legs out as shown. Lift up the top, and then place onto the legs as shown,
aligning the posts on the table top with the holes in the leg.
STEP 3
Insert the wing nut onto the posts as shown and tighten to complete assembly.