URBAN OUTFITTERS AKINA User manual

AKINA DINING TABLE
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED:
(Not Applicable)
WARNINGS:
Do not throw away packing materials and carton until after
assembly.
Assemble all parts on a clean smooth surface.
CARE INSTRUCTION:
Avoid direct exposure to sunlight. Do not place overheat or air
conditioning vents. Adjust levelers so that the furniture sits flat
on uneven floors.
Do not rub blot spills. Clean with a dry white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
(1) TOP x1
(4) ALLEN KEY
[4MM] x1
(2) LEG x3
0

E XCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN O UTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
URBAN OUTFITTERS
(3) ALLEN CSK BOLT
[M6 X 30MM] x8
Page 1 of 2

AKINA DINING TABLE
Assembly Instructions
URBAN OUTFITTERS
STEP 1
With help lay the Top (1) upside down over onto a clean smooth surface. Align Legs (2) as shown and
insert Allen bolts (3) (match corresponding part labels) then, tighten with supplied Allen key (4).
STEP 2
With help, flip the table upright and adjust the levelers as needed to accommodate uneven flooring.
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will
be prosecuted.
Page 2 of 2