URBAN OUTFITTERS 81477671 User manual

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 1
FRAMELESS MOD MIRROR
Assembly Instructions
(A) Anchor
[12x12x42mm] x2
(B) Screw
(4x4x38mm] X2
(C) Mirror
X1
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips head screwdriver, pencil, level
WARNINGS:
Do not throw away packing materials and carton until after assembly
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
60"
28"

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 2
FRAMELESS MOD MIRROR
Assembly Instructions
STEP 1
Locate the desired position of the Mirror (C). Mark the location of the D-rings on the wall in the desired location of the mirror. If
attaching directly to drywall, first install the Anchors (A) at the marked location of the D-rings. Insert the screws (B) into the
anchors (A) and tighten with a phillips head screwdriver until 1/4" of the screw stands out from the wall. If attaching to a stud, you
do not need to use the anchors (A).
STEP 2
With help, hang the mirror (C) onto screw (B) to complete assembly.
A
B