UTEPO UTP3226TS-PSB225 User manual

Quick Installation Guide
1
2
Packing List
Please check the following items after unpacking, if any missing, please contact your local dealer.
Item
Quantity
Switch
1 pc
Power Cable
1 pc
Mounting Accessory
1 set
Quick Installation Guide
1 pc
Product Overview
The product is 24-Port FE PoE+ 2-Port Gigabit Combo (RJ-45/SFP) Unmanaged Ethernet Switch.
The switch provides 24*10/100Mbps RJ-45 Ethernet ports, 2*1000Mbps combo (RJ-45/SFP) ports. All
downlink RJ-45 ports support Power-over-Ethernet (PoE), and deliver up to 30W power per port. It meets
IEEE 802.3af/at standard.
The switch supports 3 working modes through DIP switch: Default, VLAN and CCTV. Under VLAN and
CCTV mode, it supports PoE watchdog features, which can detect and restart the camera automatically if
it stops working. It can be widely used in video security monitoring systems, network projects, etc.
Appearance and Dimensions
Dimensions (mm)
Front Panel
Rear Panel
Indicator
Indicator
Color
Status
Description
PWR
Power indicator
Red
Solid On
Power supply is on.
Off
Power supply is off.
PoE
PoE indicator
Orange
Solid On
The port is supplying PoE properly.
Off
The port stops supplying PoE.
Link
Port indicator
Green
Solid On
SFP port is linking normally.
Blink
SFP port is transmitting or receiving data.
Off
SFP port is linking down.
DIP Switch
Default:All ports are free to communicate, transmission distance: 0~100m.
VLAN: Downlink ports are isolated from each other, but can communicate with uplink ports. This mode
supports PoE watchdog.
CCTV: The transmission distance is extended up to 250m, but the rate is limited to 10Mbps. This mode
supports PoE watchdog.
24-Port FE PoE+ 2-Port Gigabit Combo (RJ-45/SFP)
Unmanaged Ethernet Switch Quick Installation Guide

Quick Installation Guide Quick Installation Guide
3
4
Caution
Power on the system only after confirming that the wiring is correct, to avoid damage to the equipment. It
is recommended to use the power cable in the package to connect the power supply.
For better transmission performance, it is recommended to use high-performance Ethernet cable to
connect the switch and powered devices.
For better protection performance, it is recommended to always make the ground connection first and
disconnect it at the end when operating the device.
Before operating or maintaining the switch, please read the user manual carefully to avoid equipment
damage caused by misoperation.
Product Installation
1) Before installation, power off the equipment. Installation when device is powered on is prohibited.
2) The switch supports rack/desktop/wall mounted installation. Following with the rack-mounted installation
steps:
Step a: Fix the brackets on the side of the switch.
Accessories
Bracket
Screw
Step b: Install the switch on the rack. The distance between the devices should be more than
5cm.
3) After the above steps are completed, connect the switch and other equipment using a high-performance
Ethernet cable.
4) Check the installation and the wiring.After confirming that the connection is correct and reliable, power on
the switch.
The installation is completed.
Specifications
Item
Hardware Specifications
Downlink Ports
24*10/100BASE-T PoE+ RJ-45(Auto-MDI/MDI-X)
Uplink Ports
2*1000M RJ-45/SFP Combo
LED Indicators
1*PWR, power indicator
28*Link, port indicators
24*PoE, PoE indicators
DIP Switch
Default: all ports are free to communicate, transmission distance: 0~100m.
VLAN: downlink ports are isolated from each other, but can communicate with
uplink ports. This mode supports PoE watchdog.
CCTV: the transmission distance is extended up to 250m, but the rate is
limited to 10Mbps. This mode supports PoE watchdog.
Input Voltage
100~240V AC
Power Consumption
≤237W(Full load including PoE)
Dimensions (W*D*H)
441*180*44mm
Net Weight
2.31kg
Installation
Rack/Desktop/Wall mounted
Material
Metal shell
Color
Black
Switch Property
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
Forwarding Modes
Store and Forward
MAC Table
8k
Switching Capacity
8.8Gbps/non-blocking
Packet Forwarding Rate
6.5472Mpps
Buffer
4Mb
Power Supply
PoE Standard
IEEE 802.3af/at
PoE Power Supply Type
End-span
PoE Pin Assignment
1/2 (+), 3/6 (-)
PoE Budget
30W max for each port, 225W max for whole switch
Reliability
ESD
IEC61000-4-2, Level 3: Contact Discharge: ±6kV, Air Discharge: ±8kV
Surge
IEC61000-4-5, line to earth: 6kV
Operating
-10°C~50°C, 5%~95% (Non-condensation)
Storage
-40°C~75°C, 5%~95% (Non-condensation)
Version: V1.1, updated 2023-09-14.
The information in this document is subject to change without notice.
Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute a warranty of any kind, express or implied.