UTEPO SG16-M User manual

Please follow installation steps as below:
Please check the following items before installation, if it is missing, please contact the dealer.
5/8/16/24 Ports 10/100/1000M Unmanaged Switch 1pc
/ Power Adaptor Cable 1pc
User Manual 1pc
Mounting Kits (16/24 Ports) 1pair
Installation Steps
Equipped with iron housing, the unmanaged Gigabit Ethernet switches are used for network monitoring &
building intercom project etc.. With features of large buffer cache, 6KV surge immunity, 8K ESD
immunity, it keeps the interfaces from the damage caused by indirect lightning and ensures the high-
speed forwarding and high reliability of video monitoring data.
Board Diagram
Provide 5/8/16/24xGigabit ports
6KV surge immunity & 8KV ESD immunity
LED indicator on front panel.
Auto MDI/MDIX
Wall mounted, desktop, rack installation
Plug and play
Application(24 Ports As Example)
It is recommended to use the standard Cat5e/6 network cable to reach
the optimal transmission distance.
Device must be connected with lightning protection grounding; otherwise protection level
will be greatly reduced; please use above No.20 wire to connect the grounding terminal;
24 Ports 10/100/1000M Unmanaged Switch
Cat5/5e/6
LCD
NVR
Feature
12
Notice
PTZ Camera
Dome Camera
IP Camera
IP Camera
Po w e r
Supply
IP Camera
Rear
Front
Notice
1) Turn off the power of all the related devices before the installation; otherwise the
device would be damaged;
2) Connect PoE cameras with 1~4 downlink ports of product by Ethernet cable;
3) Connect UPLINK port of product with NVR or PC by Ethernet cable;
User Manual
Po w e r
Supply
Po w e r
Supply
Po w e r
Supply P o w e r
Supply
4口百兆以太网交换机
SFG5-M/SG8-M/SG16-M/SG24-M
AC100~240V
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 2 3 24
Grounding
Gigabit RJ45 Uplink RJ45
13.238.101.1734
V1.0
5/8/16/24 Ports 10/100/1000M Unmanaged Switch
4口百兆以太网交换机
10/100/1000M Unmanaged Switch

连接 接 口
Specification
4
10/100/1000M Unmanaged Switch 4口百兆以太网交换机
3
Product parameters are project to change without prior notice.
ITEM
PCB
PCBA Solder Joint
Components
Metal Hardware
Plastic Hardware
Paper Accessories
Glass
CD
Cable
PBB PBDE
Hazardous Substance
This table is made base on G B/ T 26572 standard.
Indicates that the con ce nt ra ti on o f th e hazardous substance in all homogeneous
materials in the part is b el ow t he r el ev ant threshold of the GB/T 26572 standard.
Indicates that the con ce nt ra ti on o f th e hazardous substance in all homogeneous
materials in the part is a bo ve t he r el ev ant threshold of the GB/T 26572 standard.(Ho we ve r,
this project only has a sm al l nu mb er o f ap plications in the inventory or processed products,
and according to the p la n, t he e nv ir on mental protection switch is being carried out, which
will meet the above requ ir em en ts
The ter m of this e nviro nme ntal
prote ction only applies to the
pr od uct wo rk in g und er th e
co nd it ions sp ecified i n t he
user ma nual
RJ 45 Making Method
pin color
white/green
green
blue
white/orange
white/blue
white/brown
orange
brown
1
2
3
4
5
6
7
8
pin color
1
2
3
4
5
6
7
8
white/green
green
blue
white/orange
white/blue
white/brown
orange
brown
EIA/TIA 568A EIA/TIA 568B
Notice
When choose RJ-45 make sure if one end is EIA/TIA568A,the other end should also be EIA/TIA568A.
When choose RJ-45 make sure if one end is EIA/TIA568B,the other end should also be EIA/TIA568B.
Instruments to be used: wire crimper, network tester. Wire sequence of RJ45 plug should conform with
EIA/TIA568A or 568B.
1) Shuck off about 2cm long the insulating layer, and bar the 4 pairs UTP cable;
2) Depart the 4 pairs UTP cable and straighten them;
3) Line up the 8 pieces of cables per EIA/TIA 568A or 568B;
4) Cut out 1.5 cm cable wrap and leave the bare wire;
) Plug 8 cables into RJ45 plug, make sure each cable is in each pin;
5
6) Then use wire crimper to crimp it;
7) Follow the 5 steps above to make the another end, following the same sequence of the first plug;
8) Using network tester to test the cable whether is working.
Model
5 Ports
8 Ports
16 Ports
24 Ports
Gigabit RJ45 Port
5
8
16
24
Surge Immunity
6KV common mode
Switching
Fabric
10Gbps
16Gbps
32Gbps
48Gbps
Packet
Forwarding Rate
7.4Mpps
12Mpps
24Mpps
36Mpps
Interface Buffer
1M
2.5M
2.75M
2.75M
MAC Address
1K
4K
8K
8K
Indicator
Link/Act Indicator per port, 1*Power Indicator
Indicator Status
Link/Act: Connecting (ON), Data transmitting(BLINK), Linkage fault(OFF)
Power(PWR): Supply power (ON), Power supply failure (OFF)
ESD Immunity
Contact discharge 6KV, air discharge 8KV
External Power
Supply
Input: 100V~240V AC,50/60Hz
Output: 5V 0.6A
Output: 5V 1A
/
/
Operation
Mode
1. De fault: All ports could be communicated freel y.
2. VL AN: Port 1 -3/6 are isolated, but can be
communicated with the last tw o ports.
3. CC TV: Port 1 - 4/8: 100Mbps, 160 meters.
/
/
Operating
Temperature
Storage
Temperature
Operating
Humidity
5%-95% (Non-condensing)
Dimension mm
(L*W*H)
140x104x28mm
180x104x28mm
294x180x44mm
294x180x44mm
10/100/1000M Unmanaged Switch
-10℃~+50℃
-40℃~+85℃