V-tech 80-056000 - Baby Call Count Phone User manual

®
LITTLE SMART
USER'S MANUAL
© VTECH
Printed in China
91-01204-003

1
Dear Parent:
At VTech
®
we know that a child has the ability to do great
things. That’s why all of our electronic learning products are
uniquely designed to develop a child’s mind and allow them
to learn to the best of their ability. Whether it’s learning about
letters, numbers, geography or algebra, all VTech
®
learning
products incorporate advanced technologies and extensive
curriculum to encourage children of all ages to reach their
potential.
When it comes to providing interactive products that enlighten,
entertain and develop minds, at VTech
®
we see the potential
in every child.

2
INTRODUCTION
Thank you for purchasing the VTECH®LITTLE SMART Count‘n Call
Phone™ learning toy! We at VTECH®are committed to providing the
best possible products to entertain and educate your child.Should you
have any questions or concerns, please call our Consumer Services
Department at1-800-521-2010 intheU.S. or 1-800-267-7377inCanada.
The VTECH®LITTLE SMART Count ‘n Call Phone™ will introduce
your child to numbers, counting and music with fun animations.
Preschoolers will also have fun role-playing by calling characters such
as the operator, zoo and their friends. This child-friendly design
includes realistic cell phone features such as SEND and END buttons, a
flip door, antenna and LCD screen. Most importantly, they can learn to
call their home phone number when parents program it into the phone!
Your child will be on the phone for hours!
Musical Antenna
LCD Screen
Send Button
Number Buttons
On Button
Volume Switch
End Button
Off Button
Transparent Door
Activity Label
LITTLE SMART
®
TM

3
INCLUDED IN THIS PACKAGE
• One VTECH®LITTLE SMART Count‘n Call Phone™ learning toy.
• One instruction manual.
WARNING : All packing materials such as tape, plastic sheets, wire
ties and tags are not part of this toy and should be discarded for
your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is OFF.
2. Locate the battery cover on the back
of the unit. Use a coin or screwdriver
to open the battery cover.
3. Install 2 new “AA” (UM-3/LR6)
batteries, as illustrated. (The use of
new, alkaline batteries is
recommended for maximum
performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.

4
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the unit when you are not
going to use it for a long time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE : If forsome reasontheprogram/activitystopsworking, thenplease
follow these steps:
1) Please turn the unit off.
2) Interrupt the power supply by removing the batteries.
3) Let the unit stand for a few minutes, then replace the batteries.
4) Turn the unit on.The unit will now be ready to play again.
If, after following the above steps, you are still having a problem
with the unit, please call our Consumer Services Department at
1-800-521-2010 in the U.S. or 1-800-267-7377 in Canada, and
a service representative will be happy to help you.

5
INSTRUCTIONS TO PROGRAM YOUR
HOME PHONE NUMBER
The VTECH®LITTLE SMART Count ‘n Call Phone™ learning toy can
teach your child to call home and help them remember their home phone
number. Just follow the simple instructions below!
1. Press the ON button to turn the unit
on.The HOME animation will appear
on the LCD screen.
2. Enter your home phone number, a
maximum of 12 digits.
3. Press the SEND button.
4. Your home phone number will flash on the LCD screen, indicating
that your number is programmed successfully.
5. To reset,removethe batteriesand reinsertthem after severalminutes.
IMPORTANT PROGRAMMING NOTES:
1. Your home phone number will automatically be erased each time the
batteries are removed.You will need to reprogram it.
2. To reprogram your number, remove the batteries and reinsert them.
Then follow the instructions above.

6
TO BEGIN PLAY
1. To begin play, press the ON button.
The telephone will ring followed by
"Hello!"TheLCD screen willshowfour
different activity animations for you to
choose.
2. Press the light-up SEND button when
youseethe activity animationthat you
want appear on the LCD screen.The
unit will automatically enter into the
selected activity.
3. Press the END button to end a call or
stop the activity you were playing. A
fun animation will be shown on the
LCD screen.

7
4. Move the Antenna up and down to
hear music notes.
5. To adjustthevolume,slide theVolume
Switch, located on the left side of the
unit, to the high volume ( ) or low
volume ( ) position.
6. To turn the unit off, press the OFF
button. You will hear a short tune
and the LCD screen will show a fun
animation.

8
ACTIVITIES
I. FREE PLAY (Default Activity)
The unit will scroll through four activities once. If you do not choose
one of the activities shown on the LCD screen, the unit will
automatically choose the default activity, which allows you to play
freely.The unit will play the following activities randomly:
1. Theunit willask you tocall yourhomenumber afteryouprogrammed
your home number into the unit.
Each time you press your correct home phone number, you will hear
the telephone ring followed by “Your home number is “XXXXXXXX.”
2. The unit will ask you to press a number.
If you press the number buttons, you will hear the number identified.
3. The unit will ask you to play counting.
4. If you press the END button, the unit will stop the default activity and
then it will begin to scroll through the
four activities again.
II. FINDTHE NUMBERS
1. To choose this activity, press the
SEND button when the LCD screen
shows the number activity animation.
2. The unit will ask you to find a number
randomly. For example, you will hear
“Press number one” followed by a
short tune.The LCD screen will show
the number one and a fun animation.

9
3. Press the number one button to
answer the question.You will hear the
number identified followed by a short
tuneand theLCDscreen willshowthe
number one animation.
4. Ifyoupress thewrong number button, theunitwill identifythe number
followed by a short tune and the LCD screen will show a number
animation that corresponds to the number button you pressed.
5. After you input your answer, the unit will continue to ask random
questions.
6. To stop this activity, press the END button at any time.
7. Press the SEND button to select another activity to play.
III. COUNTING
1. To choose this activity, press the
SEND button when the LCD screen
showsthecounting activityanimation.
2. The unit will ask you to count the
squares that appear on the LCD
screen. For example, you will hear
“Count the squares.”
“Number one”