V-tech ABC Roll and Go User manual

L
e
f
t
B
r
a
i
n
L
e
f
t
B
r
a
i
n
I
n
s
p
i
re
s
L
og
i
c
a
l
Thinking
Age 3 months+
User’s Manual
ABC Roll
& Go™
ABC Roll
& Go™

DearP
arent:
Evernoticethelookonyourbaby's facewhenhelearnssomething
new?Thesemomentsarea parent's greatestreward. Toencourage
thesemoments, wehavecreatedtheBrainyBaby
®
LeftBrain™
andRightBrain™seriesof toys.
Basedontheaward-winningBrainyBaby
®
videoseries, these
toyswill help developbothsidesof a child's brain togivehim a
cognitiveadvantage. RightBrain™toysfocusonencouraging
creativeskills suchasmusic, art, imagination, andcreativethinking.
Left Brain™toysaredesignedtoencouragecognitivethinking
skills suchaslogic, patterns, letters& numbers, andanalyzing
details. Workingtogether, this revolutionarylineof toyswill engage
yourchild's whole brain, andboosta baby's intellect!
AtBrainyBaby
®
, weknowthatyourchild's educationbeginsat
birth- andwe'reproudtobea partof that. Afterall, atVTech
®
andBrainyBaby
®
, yourchild's futureis ourinspiration!
Sincerely,
YourFriendsatVTech
®
andTheBrainyBaby
®
Company
TolearnmoreabouttheseandotherBrainyBaby
®
products,
pleasevisit www.brainybaby.comorwww.vtech.com.

2
Introduction
Thank you for purchasing the Brainy Baby®ABC Roll & GoTM learning toy.
The Brainy Baby®ABC Roll & GoTM is an interactive crawling toy for babies 3
months and up. Chunky buttons, flipping door and sliding beads reward curiosity
with lessons in letters, shapes and vocabulary. Baby friendly design and motion
sensor encourages exploration and crawling. Bright, eye-catching colors and
graphics are sure to attract baby’s attention.
ON/OFF/VOLUME
CONTROL SWITCH SHAPE BUTTONS
SLIDING BEADS
FLIPPING DOOR

3
Included in This Package
- One Brainy Baby®ABC Roll & GoTM learning toy
- One instruction manual
WARNING: All packing materials, such as tape, plastic sheets, wire ties
and tags are not part of this toy, and should be discarded for
your child’s safety.
Getting Started
Battery Installation
1. Make sure the unit is turned off.
2. Locate the battery cover on the side of the unit.
Use a coin or a screwdriver to loosen the screw.
3. Install 2 new ‘AA’(UM-3/LR6) batteries following
the diagram inside the battery box. (The use of
new alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the screw to secure the battery
cover.
Battery Notice
•Install batteries correctly observing the polarity ( +, - ) signs to avoid
leakage.
•Do not mix old and new batteries.
•Do not use batteries of different types.

4
•Remove exhausted or new batteries from the equipment when the unit
will not be used for an extended period of time.
•Do not dispose of batteries in fire.
•Do not attempt to recharge ordinary batteries.
•The supply terminals are not to be short-circuited.
•Only batteries of the same and equivalent type as recommended are to
be used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
Product Features
1. On/Off/Volume Control Switch
To turn the unit on, slide the on/off/volume control
switch to the low volume ( ) or high volume ( )
position. To turn the unit off, slide the on/off/volume
control switch to the off ( ) position.
2. Automatic Shut-off
To preserve battery life, the Brainy Baby®ABC Roll & GoTM will automatically
power-down after several seconds without input. The unit can be turned on
again by pressing any button.

5
Activities
1. Slide the on/off/volume control switch to turn
the unit on.You will hear a giggle followed by “Hello
brainy baby! Ready to roll?”The lights will flash
with the sounds.
2. Press the shape buttons to learn about shapes,
letters and objects and hear a variety of
melodies. The corresponding shape button will
flash with the sounds.
3. Flip the door for lessons in size relationships and
object recognition. The lights will flash with the
sounds.
4. Slide the beads to learn about numbers and
counting. The lights will flash with the sounds.
5. Roll the unit to activate the motion sensor. You
will hear fun sounds or a melody. The lights will
flash with the sounds.
“A star has
five points.”

6
6. If there is no input after approximately five seconds,
you will hear a phrase about shapes. After another
five seconds if there is still no input, you will hear a
phrase about letters. If there continues to be no
input to the unit, it will automatically power-down.
Melody List
1. Row, Row, Row Your Boat
2. The Wheels On the Bus
3. Three Blind Mice
4. Twinkle, Twinkle, Little Star
5. Yankee Doodle
Troubleshooting
If for some reason the program/activity stops working, please follow these
steps:
1. Please turn the unit off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit on. the unit should now be ready to play again.
If the problem persists, please call our Consumer Services Department at 1-
800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a service
representative will be happy to help you.
For information on this product warranty, please call VTech®at 1-800-521-
2010 in the U.S. or 1-877-352-8697 in Canada.

7
Important Note:
Creating and developing Brainy Baby®products is accompanied by a
responsibility that we at VTech®take very seriously. We make every effort
to ensure the accuracy of the information, which forms the value of our
products. However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage you to call
our Consumer Services Department at 1-800-521-2010 in the U.S., or 1-
877-352-8697 in Canada, with any problems and/or suggestions that
you might have. A service representative will be happy to help you.
Care and Maintenance
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat source.
3. Remove the batteries when the unit is not in use for an extended period
of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.

8
Printed in China
91-61880-001-006
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-
003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME ÀLA
NORME NMB-003 DU CANADA.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and receiver
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
•Consult the dealer or an experienced radio/TV technician for help