V-tech Blast-Off Space Station User manual

© 2016 VTech
Printed in China
All rights reserved
User’s Manual
91-003223-000
Blast-Off Space StationTM

2
5 SMARTPOINT®
LOCATIONS
SMARTPOINT®
ROCKET
SPINNING
PLATFORM
ROCKET
LAUNCHER
SPINNING
SOLAR SYSTEM
LAUNCH PAD
INTRODUCTION
Thank you for purchasing the VTech®Go! Go! Smart Wheels®Blast-
Off Space Station™ learning toy!
Play and learn with the Go! Go! Smart Wheels®Blast-Off Space
Station™.This interactive Blast-Off Space Station™ makes learning
fun.
INTRODUCTION

33
INCLUDED IN THIS PACKAGE
INCLUDED IN THIS PACKAGE
One spiral platform
One platform base
One SmartPoint®
spinning tower piece
One star handle One SmartPoint®
exit track
One galaxy wheel
One space ramp
One SmartPoint®
blast-off paltform
One SmartPoint®
rocket
One galaxy support
One big wall
One sun
One small wall
One switch gate
One flag

4
INCLUDED IN THIS PACKAGE
One snap-in medium ramp support
One snap-in large ramp support
One snap-in small ramp support
One base support
Two spiral ramp tracks
One SmartPoint® U-shape track
One 60-degree track, male
One SmartPoint®straight track
One ¼ straight track, male
One 60-degree track, female
User’s manual
Two label sheets

5
CAUTION:
Adult assembly required. For your child’s safety, do
not let your child play with the toy until it is fully
assembled.
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Please keep this user’s manual as it contains important
information.
WARNING
Unlock the packaging locks:
Turn the packaging lock counter-clockwise
several times.
Pull out and discard the packaging lock.

6
GETTING STARTED
BATTERY INSTALLATION – ROCKET
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the rocket. Use a coin or
a screwdriver to loosen the screw.
3. Install two new “AAA” (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
GETTING STARTED

7
LABEL INSTRUCTIONS
1 1 2 3 4
5 5
67
8
910 11 12
13
14 14 15
16
17
18
20 21
21
21
22
23
24
25 26
27
28
29
19
17
12
Please adhere the labels to the playset
securely as indicated on the following pages
below:

8
LABEL INSTRUCTIONS
1
234
5 5
6
78
9
12
13
14
15
16
1717
18
2121
21
22
23
24
25
26
27
28
29
19 20
10 11

9
ASSEMBLY INSTRUCTIONS
With the VTech®Go! Go! Smart Wheels®Blast-Off Space
Station™, safety comes first. To ensure your child’s safety, adult
assemblyisrequired.
1. Put the BLAST-OFF PLATFORM on the ground and then insert the
BLAST-OFF ROCKET LAUNCHER into the slots on the BLAST-
OFF PLATFORM as shown below. You will hear a “click” sound to
indicate the pieces are securely connected.
2. Insert the SNAP-IN LARGE RAMP SUPPORT into the slots on
U-SHAPE TRACK (the side with one slot). Next, insert the SWITCH
GATE, BIG WALL and SMALL WALL into the slots on the other
side of the U-SHAPE TRACK as shown below.You will hear a “click”
sound to indicate the pieces are securely connected.
ASSEMBLY INSTRUCTIONS

10
3. Insert the SUN onto the GALAXY WHEEL. Then, insert the
GALAXY SUPPORT into the BIG WALL and GALAXY WHEEL.
Next, connect the U-SHAPE TRACK to the BLAST-OFF ROCKET
LAUNCHER as shown below.
4. Insert the SNAP-IN MEDIUM RAMP SUPPORT into the slot on the
EXIT TRACK.Next, connect the U-SHAPE TRACK to the EXIT
TRACK as shown below.
5. Insert the SPACE RAMP into the slots on the SPIRAL PLATFORM
and put the SPINNING TOWER PEICE into the SPACE RAMP.
Next, put the STAR CRANK HANDLE on the SPINNING
PLATFORM column as shown below. You will hear a “click” sound
to indicate the pieces are securely connected.
ASSEMBLY INSTRUCTIONS

11
6. Use the BASE SUPPORT to attach the BLAST-OFF PLATFORM
and SNAP-IN MEDIUM RAMP SUPPORT as shown below.You will
hear a “click” sound to indicate the pieces are securely connected.
7. Connect the EXIT TRACK to the SPACE RAMP as shown below.
You will hear a “click” sound to indicate the pieces are securely
connected.
8. Insert the SNAP-IN SMALL SUPPORT into the slot on the back
of the SPIRAL RAMP TRACK. Then connect the two spiral ramp
tracks as shown below.
ASSEMBLY INSTRUCTIONS

12
9. Connect the SPIRAL RAMP TRACK to the U-SHAPE TRACK as
shown below.You will hear a “click” sound to indicate the pieces are
securely connected.
10. Once you’ve completed the above steps, you are ready to play! You
can connect this playset to other Go! Go! Smart Wheels®and Go!
Go! Smart Animals®tracks (each sold separately).
EXPAND & EXPLORE
Connect to the Go! Go! Smart Wheels®Deluxe Track Set or other
Go! Go! Smart Wheels®and Go! Go! Smart Animals®tracks (each
sold separately) to expand the Blast-Off Space StationTM and inspire
creativity.
EXPAND & EXPLORE / ASSEMBLY INSTRUCTIONS

13
PRODUCT FEATURES – ROCKET
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/
OFF SWITCH to ON ( ) position.
To turn the unit OFF,slide the ON/
OFF SWITCH to OFF ( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the rocket will automatically power-down after
approximately 45 seconds without input. The unit can be turned on
again by pressing the light-up button or pushing the rocket quickly.
Note: This product is in try-me mode in the packaging. After opening
the package, turn the vehicle off and on again to proceed with
normalplay.Iftheunitrepeatedlypowersdownquicklyorthe
light-up button fades out, we suggest changing the batteries.
PRODUCT FEATURES – ROCKET

14
ACTIVITIES - ROCKET
1. Slide the ON/OFF SWITCH to the ON
position to turn the unit ON. You will
hear a song, a phrase and sounds.
The light will flash with the sounds.
2. Press the LIGHT-UP BUTTON to
hear rocket sounds, songs and
phrases. The light will flash with the
sounds.
3. Push the rocket to hear fun sounds
and melodies. While the melody is
playing, push the vehicle again to
add fun sounds on top of the melody.
The light will flash with the sounds.
4. For added fun, the rocket interacts
with the Go! Go! Smart Wheels®
Blast-Off Space Station™. Simply
roll or put the rocket on one of the
playset’s SmartPoint®locations
to hear the rocket play sounds,
short tunes and phrases. The rocket
even interacts with other Go! Go!
Smart Wheels®and Go! Go!
Smart Animals®tracks (Each sold
separately).
ACTIVITIES – ROCKET

15
PRODUCT FEATURES – BLAST-OFF
SPACE STATION™
1. SMARTPOINT®LOCATIONS
The Blast-Off Space Station™ includes
five SmartPoint®locations that interact
with the included rocket or any other
Go! Go! Smart Wheels®SmartPoint®
vehicle (each sold separately). Simply roll
or place the vehicle over a SmartPoint®
location to hear fun sounds, phrases
and music.
ACTIVITIES – BLAST-OFF SPACE
STAT I O N ™
1. Place a vehicle on the blast-off rocket
launcher and pull the lever on the
launcher down to launch the vehicle
onto the second floor.
2. After launching to the second floor,
the vehicle will either descend down
the ramp to the base or roll past the
galaxy on the second floor platform,
depending on the direction of the
switch gate.
ACTIVITIES / PRODUCT FEATURES

16
3. Spiral through the space hole with
the vehicle. With the vehicle at the
gate, turn the star crank. Once the
space hole platform reaches the
gate, the gate will open and the
vehicle will roll on the platform.
Continue to turn the crank and watch
as the vehicle spirals towards the
hole and down the ramp.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2.
Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
CARE & MAINTENANCE / ACTIVITIES

17
TROUBLESHOOTING
Ifforsomereasontheunitstopsworking,pleasefollowthesesteps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5.. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by going
to our web site at www.vtechkids.com and filling out our Contact Us
form located under the Customer Support link. A service representative
will be happy to help you.
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied
by a responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur. It
is important for you to know that we stand behind our products and
encourage you to call our Consumer Services Department at 1-800-
521-2010 in the U.S. or 1-877-352-8697 in Canada, or by going to
our web site at www.vtechkids.com and filling out our Contact Us
form located under the Customer Support link with any problems
and/or suggestions that you might have. A service representative
will be happy to help you.
TROUBLESHOOTING

18
Note:
Thisequipmenthasbeentestedandfoundtocomplywiththelimits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.This equipment
generates,usesandcanradiateradiofrequencyenergyand,ifnot
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
thisequipmentdoescauseharmfulinterferencetoradioortelevision
reception,whichcanbedeterminedbyturningtheequipmentoffand
on, the user is encouraged to try to correct the interference by one or
moreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthat
to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operatetheequipment.
THIS DEVICE COMPLIESWITH PART 15 OFTHE FCC RULES.
OPERATIONISSUBJECTTOTHEFOLLOWINGTWOCONDITIONS:
(1)THISDEVICEMAYNOTCAUSEHARMFULINTERFERENCE,AND
(2)THISDEVICEMUSTACCEPTANYINTERFERENCERECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
CAN ICES-3 (B)/NMB-3(B)
OTHER INFO

Register your product online at vtechkids.com/warranty.
PRODUCT WARRANTY
This Warranty is applicable only to the original purchaser,
is non-transferable and applies only to “VTech” products or
parts. This product is covered by a 3-month Warranty from
the original purchase date, under normal use and service,
against defective workmanship and materials. This Warranty does not apply
to (a) consumable parts, such as batteries; (b) cosmetic damage, including
but not limited to scratches and dents; (c) damage caused by use with non-
VTech products; (d) damage caused by accident, misuse, unreasonable use,
immersion in water, neglect, abuse, battery leakage, or improper installation,
improper service, or other external causes; (e) damage caused by operating
the product outside the permitted or intended uses described by VTech in the
owner’s manual; (f) a product or part that has been modified (g) defects caused
by normal wear and tear or otherwise due to the normal aging of the product; or
(h) if any VTech serial number has been removed or defaced.
Prior to returning a product for any reason, please notify the VTech Consumer
Services Department by going to our web site at www.vtechkids.com, filling
out our Contact Us form located under the Customer Support link or calling
1-800-521-2010.
If the service representative is unable to resolve the issue, you will be provided
instructions on how to return the product and have it replaced under Warranty.
Return of the product under Warranty must adhere to the following rules: If
VTech believes that there may be a defect in the materials or workmanship of the
product and can confirm the purchase date and location of the product, we will
at our discretion replace the product with a new unit or product of comparable
value. A replacement product or parts assumes the remaining Warranty of the
original product or 30 days from the date of replacement, whichever provides
longer coverage.
THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND
IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER
ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED. IF VTECH CANNOT
LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED TO
THE DURATION OF THE EXPRESS WARRANTY AND TO THE REPLACEMENT
SERVICE AS DETERMINED BY VTECH IN ITS SOLE DISCRETION.
To the extent permitted by law, VTech will not be responsible for direct, special,
incidental or consequential damages resulting from any breach of Warranty.
This Warranty is not intended to persons or entities outside the United States
of America. Any disputes resulting from this Warranty shall be subject to the
final and conclusive determination of VTech.