V-tech Switch & Go Dino - Blister the Velociraptor User manual

BLISTER THE VELOCIRAPTOR
BLISTER THE VELOCIRAPTOR
User’s Manual
91-009642-000 US
TM
© 2013 VTech
Printed in China

Hi Friend,
You’re about to embark on a “dino-mite” adventure with
me, Blister the Velociraptor™! Just so you know, I’ve been
specially created just for you and am part of the VTech®
Switch & Go Dinos®crew! Switch & Go Dinos®are a special
breed of dinosaurs that transform from vehicle to dino in
a few easy steps. You’re going to love playing with me!
Not only can you help me do some wicked transformations,
but you can help me do other cool things, too! Try pushing
me on the ground or pressing a button and you’ll hear me
make awesome sounds! Press another button to hear me
talk, and I’ll tell you all about my wild life as a dinosaur!
Maybe you’ll even learn a thing or two.
For more fun, be sure to check out the rest of the Switch
& Go Dinos®crew (each sold separately)! And remember,
with me you’re in for some dino switchin’, high-flying fun!
Your pal,
Blister the Velociraptor™

2
INTRODUCTION
My name is Blister the VelociraptorTM, and I’m looking for a few
good dinos to join my squad. But let me warn you – you’ve got to be
at your best to keep up with me! I’m fast and ferocious with sharp,
curved claws that make me as tough as any dino.
I make a pretty tough helicopter too! I patrol the skies with my
searchlight shining down from above. Once I’ve got a target in my
sights, there’s nowhere for it to hide!
Introduction
Propeller Button
Style Button
Sound Button
LCD Screen
ON/OFF Switch
Talk Button
Volume Button
Searchlight Button
Launch Button

3
INCLUDED IN THIS PACKAGE
• OneVTech®SWITCH & GO DINOS®:Blister the VelociraptorTM
• Oneuser’smanual
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Please keep the user’s manual as it contains important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit. Use a screwdriver to loosen
the screw.
3. Install 2 new “AA” (LR6/AM-3) batteries
into the main unit following the diagram
inside the battery box. (The use of new,
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten
the screw to secure.
Getting Started

4
Battery Notice
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.

5
PRODUCT FEATURES
1. TURNING THE UNIT ON
Slide the ON/OFF Switch to ON to turn the unit ON.
2. STYLE BUTTON
Press the Style Button to choose a pilot
or change the dino eyes.
3. VOLUME BUTTON
Press the Volume Button to adjust the
volume.
There are four levels available: low,
medium, high, and mute.
4. TALK BUTTON
Press the Talk Button to hear the dino
or pilot talk.
5. SOUND BUTTON
Press the Sound Button to hear cool
sound effects.
Product Features

6
6. SEARCHLIGHT BUTTON
Press the Searchlight Button to turn on
the searchlight.
7. LAUNCH BUTTON
Press the Launch Button to launch the
rocket.
8. PROPELLER BUTTON
Press the Propeller Button to spin the
propeller.
9. MOTION SENSOR
 Movethehelicopterthroughtheairtohearfunyingsounds!
10.TURNING THE UNIT OFF/ AUTOMATIC SHUT-OFF
Slide the ON/OFF switch to OFF or hold the Talk Button for a few
seconds to turn the unit OFF.
To preserve battery life, the unit will automatically power-off after
several minutes without input.
Product Features

7
How to Switch
3. Turn the feet down. 4. Flip the legs down.
5. Fold up the propeller and turn
it forward so that it’s facing
towards the dino’s head.
6. Lift the tail up as far as it will go.
2. Fold the wings up.1. Helicopter shape.
HOW TO SWITCH THE HELICOPTER TO A DINO

8
9. Unfold the arms. 10. Move the arms down.
11. Move the head down and the
rocket launcher up. 12. Dinosaur shape.
8. Flip the propeller down so that
it rests within the tail.
7. Turn the rear wing at the end
of the tail back.
How to Switch
Note: To change the dino back into a helicopter, reverse the order of
the steps above.

9
Care & Maintenance / Troubleshooting
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.

10
Note
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorientorrelocatethereceivingantenna
• Increasetheseparationbetweentheequipmentandreceiver
• Connecttheequipmentintoanoutletonacircuitdifferentfromthat
to which the receiver is connected
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp
Caution:changesormodicationsnotexpresslyapprovedbytheparty
responsible for compliance could void the user’s authority to operate
the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORME À LA NORME NMB-003 DU CANADA.