TECHNICAL SUPPORT
www.vacuactiv.com/technical-support/
Copyright 2023 Vacu Activ
10
VA Body Sculpt
Manual operation
1. In the interface as shown in (P1). Click “Mode 2” to enter the interface as shown in (P4).
2. Set working hours. The default working time of the system is 15 minutes. Click the “+” or “-”
of the time to adjust the time.
3. Set the intensity. The default output intensity of the system is 0%. Click to slide up and
down to adjust the output intensity.
4. Set the frequency F1-F3. Click to slide up and down to adjust the output frequency.
The frequency range is: F1 range is: 1Hz (weak) to 100Hz (strong);
The range of F2 is: 1Hz (weak) to 100Hz (strong);
The F3 range is: 1Hz (weak) to 100Hz (strong).
5.Click the button, the system starts to work. Click and the system suspends work.
6. The operator puts a strap on the operating part and fixes the handle on the operating part.
The intensity output should be within the range that the user’s skin can bear
Make appropriate adjustments from low to high. The operator should communicate with the
user in time, and the user should cooperate with the feedback to the operator.
7. When the set working time is up, the machine will automatically stop.
8. Turn off the main power switch and unplug the power cord. It is strictly forbidden to clean
the other parts of the handle with organic solvents such as alcohol to avoid damage to the
handle.
10. Click to return to the interface (P3).
