Valcourt AC04331 User manual

BLACK REFLECTIVE GLASS PANELS
_________________________________________________
AC04331
_________________________________________________
INSTALLATION INSTRUCTIONS
_________________________________________________
46169A
2020-04-30
ENGLISH

Black reflective glass panels Installation Instructions – AC04331
Page 2
GLASS LINER INSTALLATION
CAUTION
Sharp edges! To avoid injury,
wear safety gloves to install liner.
1. Carefully unpack the liners. Verify that all components are included and inspect for hidden damage
prior to installation
2. Remove the Invisimesh barrier and the glass door assemblies as per details A, Band Cprior to
installation of the liner kit.
3. Remove decorative media and log set from hearth and burner cover, if applicable.
Carton Contents:
• Rear Panel
• Side Panels(2x)
• Back Retainers (2x)
• Side Retainers (2x)
Tools Needed:
• Gloves
• Eye Protection
• 5/16” Hex Driver
• Flat head
screwdriver
ENGLISH

Black reflective glass panels Installation Instructions – AC04331
Page 3
4. Remove the light bracket (C) and the light cover (D).
5. Remove the burner cover plate (E) and the burner screen (F).
2
E
F
ENGLISH
ENGLISH

Black reflective glass panels Installation Instructions – AC04331
Page 3
6. Remove the rear liner bracket (H) by removing 3 screws (G) holding it in place. Discard the
bracket, keep the screws.
7. Lift the tabs on the new rear liner bracket (I).
8. Install the new rear liner bracket (I) with 3 screws (G) kept from step 6.
ENGLISH

Black reflective glass panels Installation Instructions – AC04331
Page 3
9. Remove bolts (G) and washers (J) from the back panel. Discard washers (J).
ENGLISH
ENGLISH

Black reflective glass panels Installation Instructions – AC04331
Page 3
10. Remove 2 side screws (G) and 2 washers (J) on each side of the fireplace. Discard washers (J).
11. Install bracket (K) with two screws (G) on each side of the fireplace.
ENGLISH

Black reflective glass panels Installation Instructions – AC04331
Page 3
12. Reinstall the burner screen (F) first, then the burner cover plate (E) and the light bracket
(C).
13. Install both side liners (L) in the fireplace side brackets, previously installed.
ENGLISH

Black reflective glass panels Installation Instructions – AC04331
Page 3
14. Lift tabs on the back liner bracket (M).
ENGLISH

Black reflective glass panels Installation Instructions – AC04331
Page 3
15. Slide the back liner (N) inside the bracket (M) and install the liner at the back of the fireplace.
16. Fix the back liner in the fireplace with two screws (G).
ENGLISH

Black reflective glass panels Installation Instructions – AC04331
Page 3
17. Reinstall light cover (D).
18. Reinstall the glass door and the screen door.
ENGLISH