Vankyo Leisure 470 Pro User manual

Leisure 470 Pro
User Manual •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –23
Slovenčina
24 –44
Magyar
45 –65
Deutsch
66 –86

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
󲐜󲐝󲐞󲐟󲐠www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
What’s included
Projector
Remote (Batteries Not
Included)
User Manual
HD Cable
Power Cable
Carrying Bag
Notice
Recommended
Video,
Movie

5
Not Recommended
Product Overview
PowerPoint,
Excel, Word
Lens
Focus
Keystone
Power Button
Right
Down
OK
Input Source
Menu / Back
Play / pause
Left
Up

6
Play / Pause
Power Button
Fast Reverse
Up
Left
Back
Volume
Mute
Fast Forward
Right
Down
Menu
Input Source
Volume +
Memory Card Slot
Audio Out
AV In HD-1 HD-2 USB
Air Outlet

7
Quick Start
1. Plug the power cord into an outlet.
Power Input
Air Inlet
IR
Speaker

8
2. Take off the lens cover
3. Connect your device to the projector correctly.
*Original USB Cable
(Not Included)

9
4. Press the Power Button to turn on the projector.
5. Select the correct input source by pressing the button
6. Adjust the kickstand accordingly.

10
7. Adjust the keystone and focus ring to get the best image performance.
8. Press the Power Button twice to turn off the projector.
Focus
Keystone

11
Projector Connection and Input Source
Connect your device to the projector correctly, then select the right input source on the
homepage.
1. USB Connection
2. TF Card Connection

12
3. HD Connection
This option is for connecting a device with an HDMI output port.

13
4. AV Connection
(Not provided)

14
Wi-Fi Connection
Go to Homepage > Settings > Network Setting to connect the projector to your router's
Wi-Fi.
Screen Mirroring
For iOS System
Screen Mirroring Wirelessly
Step 1: Connect the projector and your mobile device to the same router's Wi-Fi or
directly connect your mobile device to the projector's AP hotspot.
Tip: When you are using the projector's AP hotspot, the content will be mirrored via the
cellular data.
Network Setting
System Setting
Projection Setting

15
Step 2: Go to Homepage and select iOS Cast to enter the interface below.
Mirror your iPhone, iPad or iPod touch:
Make sure that your iOS device is connected to the same network as your projector, or
connect iOS device with AP by projector:
1. On your iOS device, open control centre and tap Screen Mirroring
2. Looking for devices that can be mirrored on.
3. Select NETLINK-XXXX-(icast) from the list.
Step 3: Activate Screen Mirroring / AirPlaying Mirroring in the Control Centre of your iOS
device and search for the projector.
Step 4: Select NETLINK-(icast) from the searching list. The contents on your iOS device
will be mirrored on the projection screen/wall after a successful connection.
1.
2.
3.

16
Screen mirroring via a Lightning Cable
Step 1: Go to Homepage and select iOS Cable to enter the interface below.
iOS Cable Cast:
1. Connect the lightning connector to the phone. Connect the other end to the projector.
2. Click “Trust” on the window that pops up on the screen.
3. Enter device password
Step 2: Connect your mobile device to the USB Port on the projector using the ORIGINAL
lightning cable.
Step 3: Select Trust in the pop-up window of Trust This Computer?
Step 4: The contents on your iOS device will be mirrored on the projection screen/wall
after a successful connection.

17
For Android System
To activate this function, please make sure your Android device supports Multi-
screen/Smart View/Wireless Display. Names may vary on different Android devices.
Step 1: Go to the Wi-Fi settings of your Android mobile device to switch on the option of
Wi-Fi.
Note: Successful Wi-Fi connection is not a must, but please make sure the Wi-Fi switch
on your Android device is ON.
Step 2: Go to Homepage and select Miracast to enter the interface below.
Miracast:
To connect Android / Pad Device with Projector Based on Wi-Fi-Display Technology:
1. On your Android Mobile / Pad, open the settings menu.
2. Access your display settings or screen-mirroring.
3. Select your Miracast receiver NETLINK-XXXX.
4. Wait for the connection.

18
Step 3: Activate the Multi-screen/Smart View/Wireless Display function on your Android
device and search for the projector.
Step 4: Select NETLINK-XXXX from the searching list. The contents on your Android
device will be mirrored on the projection screen/wall after a successful connection.
Settings
1. Press the Menu button on any interface to check the PICTURE, SOUND and OPTION
settings.
Picture
Sound
Option
Tips:
1. After you select User in the option of Picture Mode, you can change the settings of the
Contrast, Brightness, Colour, Tint and Sharpness to adjust the image quality.
2. If you select User in the option of SOUND, you could change the settings of the Treble
and Bass to adjust the sound effect.
3. When you are using the USB connection or HD connection on the projector, the
option of Aspect Ratio will be activated. You can then adjust the aspect ratio of the
projection image.
2. Go to Homepage > Settings to connect the projector to a Wi-Fi network, change
language, restore the projector to factory settings, change the projection mode and
adjust the image size.
Connect to WI-Fi
Set Language and
Factory Reset
Set Projection Mode
and Image Size

19
Projection Distance and Size
* The recommended projection distance varies with different projection contents.
Please adjust the distance between the wall/screen and the projector properly as
needed.
* Ambient darkness will improve the clarity of the projected images.
Specifications
Display
Technology
LCD
Light Source
LED
Resolution
Native 1920 x 1080
Input Signal
576i/720P/1080i/1080P
Aspect Ration
4:3/16:9/Auto
Focus
Manual
Keystone
±15°
Installation Type
Front/Rear/Ceiling
Speaker
3 W/7 ohm
Power Supply
AC 100-240 V, 50/60 Hz
Unit Dimension
198*145*75 mm
(7.8*5.7*3 inches)
Unit Net Wight
1 kg (2,2 lbs)
Photo Format
Supported
BMP/JPG/PNG/JPEG
Audio Format
Supported
MP3 / WMA / MP2 /
AAC / FLAC / PCM
Video format
Supported
AVI / MP4 / MKV /
FLV /MOV / RMVB /
3GP / MPEG / H.264
/ XVID
Ports
HD In x2 / USB Port x1
/ Audio Out x1 /
Memory Card Slot x1
Video Format
Supported for TF
Card
MP4 / MKV /MOV
(24 FPS, 1280 x 720)
Mounting Screws
1/4’’

20
Troubleshooting Guide
1. The content from Hulu, Netflix, and similar services cannot be mirrored or cast.
•Due to the copyright restriction from Hulu, Netflix, and similar services, the
contents MAY NOT be mirrored or cast.
2. What should I do if I want to watch the content from Hulu, Netflix, and similar services
via the projector?
•Please prepare a Fire TV stick, Roku stick or Chromecast™(not included), then
connect it to the projector to watch the content.
3. Blurry Image
•Adjust focus ring/keystone.
•Projector and screen/wall must be in effective distance.
•4. Remote Unresponsive
•Make sure remote points at IR receiver directly.
•Do not cover IR receiver.
•Replace the old AAA batteries with new ones.
5. Upside Down Images
•Go to Homepage > Settings > Projection Setting > Projection Mode to flip the
projection image.
6. Factory Reset
•Go to Homepage > Settings > System Setting > Restore Factory Default to restore
the projector to default settings.