Vaxcel T0620 Instruction manual

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2.
T0620
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Controls
Controls
Wall Mounted Eave Mounted
Controls
Backplate
Important to Know:
Features:
Maximum Wattage: 2 W
Working Temperature Range: -13 F ~ 113 F
Note: Fixture can be wall mounted or eave mounted.
Hardware Package (included):
.
READ AND SAVE THESE INSTRUCTIONS.
3
220531

Adjusting the Sensor Head:
Note: Range set too high may increase false triggering.
Fig. 1
Installation Steps
CAUTION: Be sure to caulk completely where the back plate meets the wall surface to prevent water from
seeping into the outlet box.
220531

Fig. 4
Fig. 2 Fig. 3
Adjusting the Light Head:
Where you install your fixture is important:
Notes:
220531

USER GUIDE
Se ng for single light through mobile device (Take iOS for example as below. Android will
be slightly di erent).
Note: When power is first applied, the light will turn on to 100% brightness.
The sensor will take 45 seconds to warm up.
Before you start
220531

USER GUIDE (continued)
Note:
1. Turn power on for the light.
2. Press the RESET button on the light 3 times
within 5 seconds.
3. Red indicator light will slowly flash.
4. Check the Location setting on your device is
turned on.
220531

USER GUIDE (continued)
Note:
Note: Only works with
2.4GHz WiFi networks.
1. Turn power on for the light.
2. Press the RESET button on the light 3 times
within 5 seconds.
3. Red indicator light will slowly flash.
4. Check the Location setting on your device is
turned on.
220531

USER GUIDE (continued)
220531

USER GUIDE (continued)
220531

USER GUIDE (continued)
220531

USER GUIDE (continued)
220531