Veil Demi User manual

CoversbyVeil.com
1-833-567-5050
1
Demi
Baseboard heater covers Installation Guide
WARNING
Sharp edges. Watch your ngers.
Made in Canada
WHEN USING ELECTRICAL APPLIANCES, BASIC
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO
REDUCE THE RISK OF FIRE ELECTRIC SHOCK, AND
INJURY TO PERSONS, INCLUDING THE FOLLOWING:
1. Read all instructions before installing or using the cover.
2. Sharp edges and corners may be present on the
baseboard cover panel. Any sharp edges will be covered

caution during installation to avoid injury.

manner.
4. Do not insert or allow foreign objects to enter any





curtains away from heater.

2
1
2
Remove old cover.
If you do not have an existing back plate,see page 4
instructions for installing with mounting brackets.
Install the new panel
a
b

CoversbyVeil.com
1-833-567-5050
3
3Install the end caps
The end cap can be any of these options:
Zero Clearance Closed
a
b

4
If you do not have an existing back plate, you can use the mounting
bracket add-on:
Done !
1Screw the bracket in to the wall 2Install the panel and proceed
with end cap instructions
(Step 3 on Page 3)

3/4” or more
CoversbyVeil.com
1-833-567-5050
5
You can join to adjacent panels using the coupler piece:
1
2
a
b
Please make sure there is a clearance of at least 3/4 inches between
the heater cover and the floor to insure proper air flow.

6
You can join to adjacent panels at an angle using the corner pieces:
1
a
b
2