Veil Demi User manual
CoversbyVeil.com
1-833-567-5050
1
Demi
Baseboard heater covers Installation Guide
WARNING
Sharp edges. Watch your fingers.
Made in Canada
WHEN USING ELECTRICAL APPLIANCES, BASIC
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND
INJURY TO PERSONS, INCLUDING THE FOLLOWING:
1. Read all instructions before installing or using the cover.
2. Sharp edges and corners may be present on the
baseboard cover panel. Any sharp edges will be covered
ater installation using the proper end cap. Please use
caution during installation to avoid injury.
3. To avoid fire do not block air intakes or exhaust in any
manner.
4. Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause and
electric shock or fire, or damage the heater.
5. This heater cover is hot when in use. To avoid burns, do
not let bare skin touch hot surfaces. Keep combustible
materials such as furniture, pillows, bedding, papers, and
curtains away from heater.
2
1
2
Remove old cover and end caps.
If you do not have an existing back plate, see page 4
instructions for installing with mounting brackets.
Install the new panel.
CoversbyVeil.com
1-833-567-5050
3
3Install the end caps.
The end cap can be any of these options:
Zero Clearance Closed
a
b
3/4” or more
CoversbyVeil.com
1-833-567-5050
5
You can join to adjacent panels using the coupler piece:
1
2
a
b
Please make sure there is a clearance of at least 3/4 inches between
the heater cover and the loor to insure proper air low.
6
You can join to adjacent panels at an angle using the corner pieces:
1
a
b
2
Other manuals for Demi
2
Other Veil Water Heater Accessories manuals
