VelectriX Ascent User manual

VelectriX Instruction Manual
•Ascent
•
Urban Step Through

Page 1
Contents
Safe Riding Recommendations
Page 2
Pre-Ride Checklist
Page 3
Display and Controls
Pages 4-6
Battery Instructions
Page 7
Battery Charging
Page 8
Maintenance
Page 9
Warranty
Pages 10-12
Model Specification
Pages 13 &14

Page 2
Safe Riding Recommendations
1. Please ensure you are familiar with and follow all traffic laws
and regulations in your locality.
2. Always wear a helmet when riding your bike.
3. Don’t lend your bike to anyone who is unfamiliar with it.
4. As with all bikes it is important that you stay within safe limits
and speeds. If you feel you are travelling too quickly for the
road conditions, then slow down!! High speeds will increase risk
of injury in the event of an accident.
5. Please read and become familiar with the “Pre-Ride Checklist”
in this manual before riding your bike.
6. Switch the lights on your bike on when riding at all times of the
day or night. If your bike doesn’t have lights fitted as standard,
it is recommended that you purchase them and fit before riding.

Page 3
Pre-Ride Checklist
1. Check your bike for any loose nuts, bolts, or fixings.
2. Check tyre pressures on your bike are correct. Please always
refer to the tyre manufactures suggested levels on the side of
the tyre.
3. Check the tyres on your bike for any visible damage, wear and
tear or bald spots.
4. Check that the brake levers have been installed correctly on
your bike. The left-hand brake lever should operate the rear
brake and the right-hand brake lever should operate the front
brakes.
5. Check the brakes are working effectively.
6. Check that your bike is fitted with a working bell and reflectors.
7. Check that the wheel nuts or quick release skewers on your bike
are tight.
8. Check that the electronic functions on your bike are working.
9. Check that the handlebars and stem are tightened.
10. Check that all accessories are securely fastened.
11. Check that your battery has sufficient charge for your ride.

Page 4
LCD Display and Controls
Display Operation
The LCD display is mounted on the left side of the handlebar and is
controlled with 3 easy to use buttons:
Power, (Up) and (Down)
Power On/Off
Press and hold the button down for more than 2 seconds to start the
display. To turn off, repeat this process. The display will turn off
automatically after 10 minutes, if not in use.

Page 5
User Interface
There are 3 display screens available. Screen 1 shows Battery Charge
Indicator, Trip Time, Current Speed, Power Assist Level and Distance.
Screen 1 also shows icons for Walk Mode, Light Operation (for bikes with
lights fitted) and Power Assist Operation.
To move to screen 2, hold the Power button down, when in screen 1.
Screen 2 shows Total Trip Time, Total Trip Distance and Average Speed.
To move to screen 3, hold the Power button down when in screen 2.
Screen 3 shows Maximum Speed and Battery Voltage.
Holding the Power button down in screen 3 will return you to screen 1.
Battery Indicator
Trip Time
Power Assist Level
Current Speed
Distance

Page 6
Walk Mode
Press and hold the button to engage the Walk Assist function. The
icon will appear in the display and the bike will assist to 6 kph. Release the
button to exit the Walk Assist mode.
The walk assist feature is not a riding mode. It is designed to assist with
walking the bike up an incline to a maximum of 6 kph.
Power Assist Level Adjustment
There are 5 pedal assist settings on this bike, level 1 providing the lowest
level of assisted power and level 5 the highest. Simply push the plus or
minus buttons to change between the levels.
Light Operation (for models equipped with lights as standard)
Press and hold the button to turn on, and off, the lights and display
backlight.
Battery Charge Indicator
When the battery charge is above 70%, all 4 bars will display in the
indicator. As charge drops, each bar will turn off in order. If the battery
charge is below 15%, there will be no bars visible.
Trip Data Clearing
To reset the Trip Time and Trip Distance, press and together for
2 seconds. Now briefly press and the data will be cleared.

Page 7
Battery Instructions
Before riding you should check the battery charge by pressing the button
on the battery top. A fully charged battery will display all 4 lights.
Locking & Unlocking the Battery
The bike is supplied with a set of keys, that are required to remove the
battery from the bike. The lock is located in the upper battery mount, in
the frame of the bike.
Removing the Battery from the Bike
The Battery Charger
Only use the battery charger supplied with this bike.
To remove the battery, insert the key and turn fully clockwise. Use the
battery handle to pull the battery from the bike. When reinserting the
battery, place the base in first and push down gently on the top to
engage the lock. You will hear the lock “click” into place.
Always make sure the battery is securely locked in place before riding.

Page 8
Charging the Battery
The battery may be charged on or off the bike.
1. Plug the battery charger into the charging port on the battery
and wall power socket.
2. Only when connected to the battery, should the charger be
turned on at the wall power socket.
3. When charging, both LED lights on the charger will be RED.
One of the lights will turn GREEN when the battery is fully
charged.
4. Charging time is around 4 hours.

Page 9
Maintenance
oYour VelectriX bike should be returned to your servicing dealer for
servicing and a thorough inspection once every 9 months or
1500kms, whichever comes first. Excluding the electronics, motor,
battery and wiring, your VelectriX e-bike is a normal bike, with
normal components. Your dealer will be able to explain to you the
general care and maintenance required for the components of your
bike.
oOnce a month lubricate the chain and all pivot points on your
derailleur and derailleur pulleys with suitable chain lube.
oYou can clean your bike with warm soapy water, however, please do
not submerge any electrical components or use a high pressure
hose. You can wipe dry the bike with a cloth.
oVelectriX encourages all owners to return their new VelectriX bike
to the place of purchase for a service/safety check, within the first
month or so of ownership.

Page 10
Warranty
This warranty is provided by VelectriX Pty Ltd. VelectriX warrants its
products, including all individual components against defects in material or
workmanship as follows:
Warranty Conditions
oThe warranty period is not renewed or extended as a result of a
warranty repair or replacement.
oThe sales receipt for the product must be provided as a proof of
purchase when a warranty claim is made.
oThe warranty is not transferable and is only offered to the original
purchaser of the product.
oThe warranty only applies to products purchased through a
VelectriX authorised reseller/dealer.
oAny approved warranty work must be completed by an authorised
VelectriX reseller/dealer.
oTo the extent that any conditions or warranty implied by law is
excludable, such a condition or warranty is excluded.
oThe warranted maximum combined carrying capacity for VelectriX
products is 110kgs (combined weight of rider & carried goods)
Frame Warranty
oVelectriX bicycle frames are warranted to be free from manufacture
defects in materials and/or workmanship for 5 years, from date of
original purchase.
Non-Electrical Component Warranty
The following non-electrical components are warranted to be free from
manufacture defects in materials and/or workmanship for a 1 year period
from the date of original purchase: fork, stem, handlebar, headset, seat
post, saddle, brake levers, brake callipers, brake rotors, bottom bracket,
crank set, pedals, rims, spokes, wheel hub, freewheel, cassette, derailleur,
gear shifter, kickstand, rack, mudguards.

Page 11
Electrical Component Warranty
The following electrical components are warranted to be free from
manufacture defects in materials and/or workmanship for a period of 2
years from the date of original purchase:
oMotor
oBattery
oController
The following electrical components are warranted to be free from
manufacture defects in materials and/or workmanship for a period of 1 year
from the date of original purchase:
oBattery charger
oWiring looms
oLight fittings/bulbs
oDisplay
oPAS sensor & cable
oGear shift sensor & cable
The battery warranty will exclude damage from:
oOver charging or power surges
oThe use of an improper, non-approved VelectriX charger
oAny other misuse, abnormal wear and tear, physical damage or
water damage
oAge related reduction in the capacity of the battery is normal and
unavoidable and as such does not constitute a fault. If the battery
has a capacity of at least 60% within 2 years of purchase it will be
considered acceptable. VelectriX reserves the right for the battery
to be returned for testing to establish the capacity before any repair
or replacement is authorised.

Page 12
Component Exclusions
The following components are deemed to be considered wear and tear items
and are NOT covered under this warranty:
oTyres and inner tubes/valves
oHead lights and tail lights
oMagnetic PAS sensor disc
oBrakes pads and cables
oDrivetrain components including chainrings, gear cassettes, chain,
gear cables and oils and lubricants.
Usage Exclusions
The following acts are not covered under warranty:
oDamage caused by acts of god
oDamage caused by improper use or force majeure
oDamage which results from improper or insufficient care
oRepairs, maintenance, alterations, modifications or the replacement
of parts by persons other than trained mechanics
oAny commercial use
oAccidental damage, neglect, abuse, misuse, repairs resulting from
the use of second hand parts
oDamage caused from competitive use, stunt riding or exceeding the
bikes carrying capacity.
How To Make a Warranty Claim
If you believe your VelectriX product is faulty or defective, please:
1. Contact the authorised VelectriX reseller/dealer from where the bike
was purchased and explain the issue.
2. The reseller/dealer with then advise as to how they will assist with
your warranty claim.

Page 13
Model Specification
VelectriX Ascent Mens
FRAME
Aluminium mountain frame
COLOUR
Blue (YS 7634)
SIZE
46cm
FORK
Suntour XCM 27.5" suspension forks –100mm travel
RIMS
Double wall, 27.5" 13g, 36h, brass nipples
TYRES
Innova 27.5" x 2.25"
HANDLEBARS
Promax MTB 680mm 31.8mm, 6 degree back sweep, 30mm rise
STEM
Promax stem 28.6mm clamp, 31.8mm bar, 90mm extension
SEAT POST
Promax 27.2mm x 350mm
BRAKES
Hydraulic with 180mm discs
GEARS
Shimano Altus 7 speed
MOTOR
300 Watt, 36 volt rear hub drive,
DRIVE TYPE
Speed sensor. 5 levels of pedal assist & walk assist mode
BATTERY
36v 13ah (468wh)
CHARGER
Smart charger 36V 3A Single Pin
DISPLAY
LCD display
ACCESSORIES
Side stand

Page 14
VelectriX Urban Step Through
FRAME
Aluminium step through frame
COLOUR
Grey (YS 7779)
SIZES
38 and 44cm
FORK
Rigid forks
RIMS
Double wall, 27.5" 13g, 36h, brass nipples, with eyelets
TYRES
Wanda City 27.5" x 1.95"
HANDLEBARS
Promax 640mm 25.4mm, 45 degree back sweep, riser
STEM
Promax fixed 28.6mm clamp, 31.8mm bar, 108mm extension
SEAT POST
Promax 27.2mm x 300mm
BRAKES
Hydraulic with 180mm discs
GEARS
Shimano Altus 7 speed
MOTOR
300 Watt, 36 volt rear hub drive,
DRIVE TYPE
Speed sensor. 5 levels of pedal assist & walk assist mode
BATTERY
36v 13ah (468wh)
CHARGER
Smart charger 36v 3A Single Pin
DISPLAY
LCD display
ACCESSORIES
Fitted rear rack, front & rear lights (powered by main battery),
side stand, mudguards