Ventus W154 User manual

Manual | Brugsanvisning | Instruktionsbok | Ohjeet
Weather station
Vejrstation
Väderstation
Sääasemat
Art. no. W154
EAN 5705858719122
Size: 154 x 94 x 46 mm Imported by / Importeret af
NSH NORDIC A/S
Virkefeltet 4
8740 Braedstrup
Denmark
Made in PRC

Weather Station Instruction Manual
USER MANUAL
1. Features
1.1 Weather Forecast
• Sunny, Slightly Cloudy, Cloudy, Rainy and Snow animation
1.2 Wind
• Wind Speed, Wind Chill
• Displays m/s, knots, km/h and mph user selectable
• Beaufort scale 1 ~ 12
1.3 Rain
• Today Rainfall, Total Rainfall & Since Time
• Past 30 days rainfall history checking
• Rain alert
1.4 Time
• Radio controlled time with Manual Time setting option
• 12/24 hour user selectable
• Daily Alarm function
• Moon Phase display
1.5 Barometric Pressure
• Absolute & Relative barometric pressure
• Measures mb/hPa, inHg, mmHg user selectable
• Pressure Trend
1.6 Humidity
• Indoor & Outdoor Humidity
• Measurable range: 20 ~ 99%
1.7 Temperature
• Indoor measurable range: -10 ~ 50°C [+32 ~ +122°F]
• Measures °C / °F user selectable
• Outdoor measurable range: -20 ~ 50°C [-4 ~+ 122°F]
1.8 Wireless Outdoor Sensor
• Low-battery indicator for Outdoor Thermo Sensor
• Wall Mount or Table Stand
• 868MHz RF transmitting frequency
GB

2. Main Unit Appearance
2.1 Part A- LCD
A1: Radio Controlled Icon
A2: Time/Since time/Date/Alarm time
A3: Moon Phase
A4: Weather Forecast
A5: Barometric Pressure
A6: Barometric Pressure Trend
A7: Beaufort scale
A8: Wind Speed
A9: Wind Direction
2.2 Part B- Buttons
B1: “▼/RAIN HISTORY” button
B2: “MODE/SET” button
B3: “▲/ / ” button
B4: “SNOOZE/LIGHT” button
B5: “RAIN SINCE/RAIN CLEAR” button
2.3 Part C- Structure
C1: Battery Compartment
GB
A10: Wind Chill
A11: Total Rainfall
A12: Today Rainfall
A13: Indoor Temperature
A14: Indoor Humidity
A15: Outdoor Temperature
A16: Outdoor Humidity
B6: “WEATHER/ABS/REL” button
B7: “RAIN ALERT” button
B8: “OUT-TEMP ALERT” button
B9: “RESET” button

3. Sensor
1: Wall Mount Hole
2: Transmission Indication LED
3: Temperature
4: Humidity
4. Getting Started:
4.1 Main Unit:
• Open main unit battery compartment cover [C1]
• Insert 2 x AA size batteries observing polarity [ “+” and “ –“ marks]
• Replace main unit battery compartment cover [C1]
• The main unit can be placed onto any at surface
4.2 Outdoor Remote Sensor & Wind Sensor
• Batteries compartment (8) of thermo sensor is locating behind the back cover.
Slide to open the battery door.
• Insert 2 x AA batteries observing polarity [ “+” and “–“ marks]
• Plug the cable into the remote sensor. The remote sensor should be securely mounted
onto a horizontal surface.
Note: Transmissions between receiver and transmitter can reach up to 70m in open area.
Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage
lines, etc.
GB
5:”C/F” button
6:”RESET” button
7: Wind Sensor Plug
8: Battery Compartment

4.3 Wind Sensor & Rain Gauge
Accessories
Setup
The wind sensor should be positioned in an open area away from trees or other obstructions.
• Run the cable that is already fastened to the wind sensor through the extension pole, and run it
through the plastic base
• Align the back of the plastic base to an existing pole or wall. Using the U-bolts, secure the
plastic base to the pole by inserting the ends of the U-bolts into the holes on the plastic base and
securing it with washers and bolts. Run the cable through the plastic base
• Plug the cable to the battery compartment of outdoor thermo & humidity sensor.
Set up example as below:
GB
Plastic base Screws and washes Pole Washes & Screws x 3
Round U-shape bolts
Belt