Vermeiren D200 User manual

VERMEIREN
D200
I N S T R U C T I O N M A N U A L

Instructions to the specialist dealer
This instruction manual is part and parcel of the product and must accompany every product sold.
Version: E, 2014-08
All rights reserved, including translation.
No part of this manual may be reproduced in any form what so ever (print, photocopy, microfilm or any other process) without
written permission of the publisher, or processed, duplicated or distributed by using electronic systems.
© N.V. Vermeiren N.V. 2014

D200
2014-08
Page1
Contents
Preface.................................................................................................2
1Product description .................................................................3
1.1Intended Use................................................................................................................3
1.2Technical specifications ..............................................................................................4
1.3Drawing.......................................................................................................................5 
1.4Accessories..................................................................................................................5
1.5Location identification plate........................................................................................6
1.6Explanation of symbols...............................................................................................6
1.7Safety rules..................................................................................................................6 
2Use............................................................................................. 7
2.1Carrying the wheelchair..............................................................................................7
2.2Mounting the rear wheels............................................................................................7
2.3Unfolding the wheelchair............................................................................................7
2.4Mounting or removing of the footrest.........................................................................8
2.5Operating the brakes....................................................................................................8
2.6Mounting or removing of armrests..............................................................................8
2.7Transfer in and out the wheelchair............................................................................10
2.8Correct position in the wheelchair ............................................................................10
2.9Riding the wheelchair................................................................................................10
2.10Moving on slopes......................................................................................................11
2.11Negotiating steps or curbs.........................................................................................11
2.12Fold up the wheelchair..............................................................................................13
2.13Taking off the wheels................................................................................................13
2.14Transport in the car....................................................................................................13
2.15Use of the wheelchair as seat in a motor vehicle ......................................................13
3Installation and adjustment.................................................. 16
3.1Tools..........................................................................................................................16
3.2Manner of delivery....................................................................................................16
3.3Adjusting the seat height...........................................................................................16
3.4Adjust the brakes.......................................................................................................17
3.5Adjusting of the footrest............................................................................................18
3.6Adjusting the armpad................................................................................................19
4Maintenance........................................................................... 19

D200
2014-08
Page2
Preface
First of all we want to thank you for putting your trust in us by selecting one of our
wheelchairs.
The Vermeiren wheelchairs are the result of many years of research and experience. During
the development, special attention was given to the ease of use and the serviceability of the
wheelchair.
The expected lifetime of 8 years for your wheelchair is strongly influenced by the care and
maintenance of the wheelchair.
This manual will help you get acquainted with the operation of your wheelchair.
Following the user instructions and the maintenance instructions are an essential part of the
warranty.
This manual reflects the latest product developments. Vermeiren has the right to introduce
changes without the obligation to adapt or replace previously delivered models.
For any further questions, please consult your specialist dealer.

D200
2014-08
Page3
1 Product description
1.1 Intended Use
The wheelchair is intended for people with walking difficulties or no walking abilities.
The wheelchair is designed to transport 1 person.
The wheelchair is suited for indoor and outdoor use.
The user can propel the wheelchair by himself or have the wheelchair pushed by an
attendant.
The different types of fittings and accessories, and the modular construction allow full use by
persons disabled by:
paralysis
loss of limbs (leg amputation)
limb defects or deformations
stiff or damaged joints
heart insuffiencies and poor blood circulation
balance disturbances
cachexia (decrease in muscle)
and also for aged persons.
When providing for individual requirements:
body size and weight (max. 130 kg)
physical and psychological condition
residential circumstances
environment
should be taken into consideration.
Your wheelchair should only be used on surfaces where all four wheels are touching the
ground and where there is sufficient contact to propel the wheels equally.
You should practice for use on uneven surfaces (cobblestones, etc.), slopes, curves and to
get past obstacles (curbs, etc.).
The wheelchair should not be used as a ladder, nor is it a transport for heavy or hot objects.
When used on mats, carpeted floors or loose floor coverings, the floor covering can get
damaged.
Use only Vermeiren approved accessories.
The manufacturer is not liable for damage caused by the lack of or improper service or as a
result of not following instructions from this manual.
Compliance with the user and maintenance instructions are an essential part of the
guarantee conditions.

D200
2014-08
Page4
1.2 Technical specifications
Technical terms below are valid for the wheelchair in standard settings.
If other footrest / armrest or other accessories are used, the tabulated values will change.
Make
V
ermeiren
Address
V
ermeirenplein 1/15, B-2920 Kalmthout
Type Manual wheelchai
r
Model D200
Maximum occupant mass 130 kg
Description Dimensions
Effective seat width 380 mm 400 mm 420 mm 440 mm 460 mm 480 mm 500 mm 520 mm
Overall width (depends on the seat
width)
580 mm 600 mm 620 mm 640 mm 660 mm 680 mm 700 mm 720 mm
Description Dimensions Min. Dimensions Max.
Overall length with footrest 1010 mm
Folded length 1010 mm
Folded width 300 mm
Folded height 880 mm 940 mm
Total mass 16,8 kg
Mass of heaviest part 9,3 kg
Static stability downhill 16° (in standard configuration)
Static stability uphill 12° (in standard configuration)
Static stability sideways 20° (in standard configuration)
Maximum safe slope 12°
Obstacle climbing 60 mm
Seat plane angle 5°
Effective seat depth 430 mm
Seat surface height at front edge 470 mm 530 mm
Backrest angle 5°
Backrest height 420 mm
Distance between footrest and seat 410 mm
Angle between seat and footplate -1,5° 18,5°
Angle between leg footrest and
footplate
80° 100°
Angle between seat and leg
footrest
98,5°
Distance between armpad and seat 220 mm 240 mm
Front location of armrest structure 410 mm
Handrim diameter 535 mm
Horizontal location of axle
(deflection)
37 mm
Minimum turning radius 1500 mm
Diameter PU Rear wheels 22" 24"
Diameter PU steering wheels 200 mm
Storage and use temperature + 5 °C + 41 °C
Storage and use humidity 30% 70%
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg
/
°
Table 1: Technical specifications

D200
2014-08
Page5
The wheelchair complies to the requirements set up in:
ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.
ISO 7176-16: Resistance to ignition of upholstered parts
1.3 Drawing
1.4 Accessories
The following accessories are available for the D200:
Anterior pelvic belt (B20) for mounting on the tubes of the back (see according
manual)
Anti-tipping device (B78) for mounting on the bottom frame (see according manual)
1 = Armpads
2 = Armrests
3 = Footrests
4 = Angle adjustable footplates
5 = Brakes
6 = Steering wheels (front wheels)
7 = Driving wheels (rear wheels)
8 = Handrims
9 = Seat
10 = Backrest
11 = Tip cap
12 = Cross
13 = Handgrips

D200
2014-08
Page6
1.5 Location identification plate
1.6 Explanation of symbols
Maximum mass
Indoor and outdoor use
Maximum Safe Slope
CE conformity
1.7 Safety rules
L To prevent injury and/or damage to your wheelchair, make sure that no objects
and/or body parts are caught in the spokes of the driving wheels.
L The parking brakes should be applied before getting into and out of the wheelchair.
L When getting into and out of the wheelchair, do not stand on the footplates. These
should be folded up beforehand, or the footrest should be swung completely outwards
out of the way.
L Investigate the effects of shifting the centre of gravity on the behavior of the wheelchair,
for example on up or down gradients, on laterally sloping ground, or when overcoming
obstacles. Obtain support from an attendant.
L If you want to pick up something (lying in front of, on the side, or to the rear of the
wheelchair), you should not lean too far out to avoid tipping over.
L When moving through doors, arches, etc. ensure that there is enough room at the sides
so that you do not get your hands or arms caught or crushed and that there is no
damage to the wheelchair.
L Only use your wheelchair according to regulations. For example, avoid uncontrolled
rolling against obstacles (steps, curbs, doorframes, etc) or dropping down from ledges.
The manufacturer cannot assume liability for damage caused by overloading, collision
or other improper use.
1 = Logo Vermeiren
2 = Identification plate
3 = Name Vermeiren
4 = Crash tested
Type designation

D200
2014-08
Page7
L Stairs may only be negotiated when aided by another person. If furnishings like drive-on,
ramps or lifts are available, use them.
L When moving on the public highway, you are subject to the rules of the road.
L When driving your wheelchair, you should not be under the influence of alcohol or
medicine as in the case of driving other vehicles. This also applies to indoor driving.
L When travelling outdoors, adapt your driving to weather and traffic conditions.
L To be better visible when driving in the dark, wear the brightest possible clothing or
clothes with reflectors, and check that the reflectors mounted on the sides and rear of
the wheelchair are clearly visible.
L Never exceed the maximum load of 130 kg.
2 Use
This chapter describes the everyday use. These instructions are for the user and the
specialist dealer.
The wheelchair is delivered fully assembled by your specialist dealer. The instructions
intended for the specialist dealer on how to set up the wheelchair are given in § 3.
2.1 Carrying the wheelchair
The best way to carry the wheelchair is to make use of the wheels and roll the wheelchair.
If this is not possible (e.g. when the rear wheels are taken off for transportation in a car),
firmly grasp the frame on the front and the grips. Do not use the foot or arm rests or the
wheels to grasp the wheelchair.
2.2 Mounting the rear wheels
1. Take the rear wheel and push on button .
2. Keep the button pushed in and mount the rear
wheels axle till it stops.
3. Release the button .
4. Check that the wheels are secured.
2.3 Unfolding the wheelchair
LCAUTION: Risk of clamping – Keep fingers away from moving parts of the
wheelchair.
1. Position yourself behind the wheelchair.
2. Use the hand-grips to open the wheelchair as much as possible.
3. Position yourself at the front of the wheelchair.
4. Push both seating tubes down till they are fixed in their position.

D200
2014-08
Page8
2.4 Mounting or removing of the footrest
The mounting of the footrest is done as
follows:
1. Hold the footrest sideways at the outside
of the wheelchairs frame and mount the
tube hood
into the frame.
2. Swing the footrest inwards till it clicks in
position.
3. Swing the foot plate downwards.
To take off the footrests:
1. Pull handle .
2. Swing the footrest to the outside of the
wheelchair till it comes loose from the
guidance.
3. Pull the footrest from tube hood .
2.5 Operating the brakes
LWARNING: The brakes are not used to slow down the wheelchair during
movements – Use the brake only to prevent the wheelchair from unintended
movements.
LWARNING: Good operation of the brakes is influenced by wear and
contamination of the tires (water, oil, mud, …) – Check the condition of the tires
before each use.
LWARNING: The brakes are adjustable and can wear – Check the operation of the
brakes before each use.
LWARNING: Risk of clamping - Do not touch the wheelchair frame with your
hands, fingers when applying, releasing the brakes.
To apply the brakes:
1. Push the brake handles forward till you feel a distinctive click.
LCAUTION: Risk of unintended movement – Make sure the wheelchair is on a
flat horizontal surface before releasing the brakes. Never release both brakes
simultaneously.
To release the brakes:
1. Release one brake by pulling the handle backwards.
2. Hold the hand-rim of the released wheel with your hand.
3. Release the second brake by pulling the handle backwards.
2.6 Mounting or removing of armrests
The arm supports of the wheelchair can be mounted by following instructions.
LCAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the
bottom side of the armrest.
LCAUTION: Risk of clamping – Be careful that your fingers, hands are not
squeezed between the rear wheels and the side plate of the armrests.

D200
2014-08
Page9
1. Mount the rear tube of the armrest in tube
hood
.
2. Make sure the armrest clicks in the locking
mechanism.
3. Fold the armrest forward.
4. Click the front tube of the armrest in tube
hood
.
To open and remove the armrest:
1. Press lever
and pull the front of the armrest
upwards.
2. Fold the armrest backwards.

D200
2014-08
Page10
3. To remove the armrest, press button and pull the rear of the armrest from
tube hood .
2.7 Transfer in and out the wheelchair
LCAUTION: In case you cannot perform the transfer in a safe manner, ask
someone to assist you.
LCAUTION: Risk of tipping over of the wheelchair – Do not stand on the footplate.
1. Position the wheelchair as close as possible to
the chair, couch or bed to/from you wish to
transfer.
2. Check both brakes from the wheelchair are in
the on position.
3. Fold the footplates upwards to prevent
standing on them.
4. If the transfer is on the side of the wheelchair,
fold the armrest on that side upwards
(see § 2.6).
5. Transfer to/from the wheelchair.
2.8 Correct position in the wheelchair
Some recommendations for a comfortable use of the wheelchair:
Position your backside as close as possible to the back rest.
Make sure your upper legs are horizontal – If needed adjust the length of the
footrests (see § 3.5.1).
2.9 Riding the wheelchair
LWARNING: Risk of clamping – Prevent your fingers from being caught by the
wheels spokes.
LWARNING: Risk of clamping – Prevent that your fingers, hands are clamped
between the hand rim and rear wheel.
LWARNING: Risk of clamping – Be careful passing through restricted passages
(e.g. doors).
LWARNING: Risk of burns – Be careful when driving in hot or cold environments
(sunshine, extreme cold, saunas, etc.) for a sufficient amount of time and when
touching - Surfaces can assume the environment temperatures.

D200
2014-08
Page11
1. Release the brakes.
2. Take both hand rims at their highest position.
3. Lean forward and push the hand rims forward until straight arms.
4. Swing your arms loosely back to the hand rims topside and repeat the movement.
2.10 Moving on slopes
LWARNING: Control your speed – Moving on slopes as slow as possible.
LWARNING: Consider the capacities of your attendant – If your attendant does not
have enough force to control the wheelchair, put on the brakes.
LWARNING: Risk of tipping over – Lean forward to move your centre of gravity
forward. To improve a better stability.
1. If available on the wheelchair, wear the safety belt.
2. Do not attempt moving on too high slopes. The maximum
slope angles (upwards and downwards) are mentioned in
table 1.
3. Ask an attendant to help you moving on the slope.
4. Lean forward to move your centre of gravity forward.
2.11 Negotiating steps or curbs
2.11.1 Getting down steps or curbs
Riding down low curbs can be done moving forwards. Make sure that the footplates do not
touch the ground.
A practiced user can negotiate small steps or curbs by himself:
L WARNING: Risk of tipping over – If you do not have
enough experience with your wheelchair, ask
assistance of an attendant.
1. Bring balance on the rear wheels to reduce the pressure on
the front wheels.
2. Negotiate the curbs.
Higher curbs can be taken forward with an attendant:
1. Ask the attendant to tip the wheelchair slightly backwards.
2. Get past the curbs while moving on the rear wheels.
3. Put the wheelchair back on the four wheels.
An experienced user can negotiate higher curbs by himself. This is
best done backwards.
1. Turn the wheelchair to have the rear wheels facing the
curb.
2. Lean forward to move your centre of gravity forward.
3. Move the wheelchair close to the curbs.
4. Use the hand rim to roll-off wheelchair from the curb in a
controlled manner.

D200
2014-08
Page12
2.11.2 Moving up steps or curbs
Moving up steps or curbs with attendant as follows:
1. Prevent the footplates from touching the curb.
2. Ask the attendant to tip the wheelchair backwards, just
enough to move the front wheels over the curb.
3. Lean backwards to move your centre of gravity above the rear
wheel.
4. Place the front wheels on the curb.
5. Roll rear wheels of the wheelchair over the curb.
Higher curbs are negotiated backwards:
1. Turn the wheelchair to have the rear wheels facing the curb.
2. Lean backwards and move your centre of gravity above the rear wheels.
3. Ask the attendant to pull the wheelchair on the curb.
4. Take back the normal position in the wheelchair.
An experienced user can negotiate curbs by himself:
LWARNING: Risk of tipping over – If you have not enough experience to control
the wheelchair, get help from an attendant.
1. Drive until the curbs.
2. Ensure that the footrest do not touch the curbs.
3. Lean backwards so you are balancing on the rear wheels.
4. Role the front wheels balancing over the curbs.
5. Bend forwards for more stability.
6. Role the rear wheels over the curbs.
2.11.3 Taking of stairs
Taking of stairs while you staying in the wheelchair shall be according following rules:
LWARNING: Risk of tipping over – Taking of stairs shall always with 2 attendants.
1. Remove the footrests.
2. One attendant tip the wheelchair slightly backwards.
3. The second attendant take the front of the frame.
4. Stay calm, avoid sudden movements and keep your arms inside the wheelchair.
5. Take the steps on the rear wheels of the wheelchair.
6. Mounting the footrests back after taking the stair.

D200
2014-08
Page13
2.12 Fold up the wheelchair
L CAUTION: Chance of pinching – Do not place fingers between the components
of the wheelchair.
1. Fold or remove the footplates (see § 2.4).
2. Take the seat on the front side and backside and pull it up.
2.13 Taking off the wheels
To facilitate the transport off the wheelchair the rear wheels can be taken off:
1. Make sure the brakes standing in the off
position.
2. Take the wheelchair to the side frame where
you want to remove the wheel.
3. Press the button in the center of the wheel
hub.
4. Pull the wheel away from the frame.
2.14 Transport in the car
LWARNING: Risk of injury – See that the wheelchair is attached properly. So you
can avoid injury from the passengers during collision or sudden braking.
LWARNING: Risk of injury – Use for attaching the wheelchair and passenger
NEVER the same seatbelt.
To transport the wheelchair in the car use following steps:
1. Remove footrests and accessories.
2. Store footrests and accessories safely.
3. If possible, fold the wheelchair and remove the wheels.
4. Place the wheelchair in the luggage place.
5. If the wheelchair and the passenger compartment is NOT separated, attach the
frame of the wheelchair securely to the vehicle. You can use the available safety
belts in the vehicle.
2.15 Use of the wheelchair as seat in a motor vehicle
LWARNING: Risk of injury - The wheelchair may only be used as a seat in a
motor vehicle when the handgrips are placed in the lowest position. In other
cases it is forbidden to use the wheelchair as a seat in a motor vehicle.
LWARNING: The wheelchair has passed the crash of ISO 7176-19: 2008 and, as
such, has been designed and tested for use only as forward-facing seat in a
motor vehicle.
LWARNING: The wheelchair's pelvic belt alone is not suited as an occupant
restraint belt.
The wheelchair is tested using the four-point strap-tie system and a 3-point occupant-
restraint system.

D200
2014-08
Page14
Whenever feasable, use the seat of the vehicle and store the wheelchair in the cargo area.
Steps to secure the wheelchair in a motor vehicle:
1. Check that the vehicle is equipped with a suitable wheelchair tie down and occupant-
restraint system, conform ISO 10542.
2. Check that the components of the wheelchair tie down and occupant restraint system
are not frayed, contaminated, damaged or broken.
3. If equipped with an adjustable seat and/or back tilt, make sure that the wheelchair
user is sitting as upright as possible. If the user's condition prevents this, a risk
assessment should be done to evaluate the user's safety during transit.
4. Remove all mounted accessories such as trays and respiratory equipment, and
secure them in a safe place.
5. Position the wheelchair facing forward in the travelling direction, centrally between
the tie-down rails mounted in the floor of the vehicle.
6. Make sure that the indicated zones around the wheelchair user are clear from rigid
vehicle parts.
7. Mount the front securement straps according to the instructions of the strap-system
manufacturer at the indicated place. (figure 3)
This place is marked on the wheelchair with a symbol. (figure 4)
8. Roll back the wheelchair until the front straps are tight.
9. Apply the wheelchair brake.
10. Mount the back securement straps according to the instructions of the strap-system
manufacturer at the indicated place. (figure 3)
11. This place is marked on the wheelchair with a symbol. (figure 4)
Figure 3
Handgrips in
lowest position

D200
2014-08
Page15
Steps to secure the wheelchair user:
1. Remove both arm rests.
2. If present, attach the wheelchair's pelvic belt.
3. Attach the occupant restraint belts according to the instructions of the strap-system
manufacturer.
4. Wear the pelvic belt low across the front of the pelvis, so that the angle of the pelvic
belt is within the preferred zone of 30° to 75° to the horizontal, similar to that shown
below.
5. A steeper (greater) angle within the preferred zone is desirable.
6. Adjust the belt tightly according to the instructions of the strap-system manufacturer,
consistent with the user's comfort.
7. Ensure that the restraint belt connects in a straight line to the anchor point in the
vehicle and that no bends in the belt are visible, for instance at the axle of the rear
wheel.
8. Install the arm rests, if desired. make sure that belts are not twisted or held away
from the body by wheelchair components such as arm rests or wheels.

D200
2014-08
Page16
3 Installation and adjustment
The instructions in this chapter are for the specialist dealer.
The Vermeiren D200 has been designed to be adjust with a minimum of replacements parts.
There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
LWARNING: Risk of unsafe settings - Use only the settings described in this
manual.
LWARNING: Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1 Tools
To set up the wheelchair the following tools are needed.
Wrench set n° 7 to n° 22
Allen key set n° 3 to n° 8
Screwdriver n° 4 to n° 5
Screwdriver Phillips head
3.2 Manner of delivery
The Vermeiren D200 shall be delivered with:
1 frame with armrests, rear and front wheels (seat height of 500 mm)
1 pair footrests
Tools
Manual
Accessories
3.3 Adjusting the seat height
The Vermeiren D200 is adjustable in 3 seat heights by changing the wheels position. At each
height there is a different setting of the front and rear wheels.
LWARNING: The top hole of the axle plate is not intended for mounting the rear
axle - This hole is for mounting the drum brake.
Seat height Rear wheel Front wheel
470 mm Hole 1 and Hole 2 Hole A
500 mm
(Standard)
Hole 2 and Hole 3 Hole B
530 mm Hole 3 and Hole 4 Hole C
Table 2: Seat heights

D200
2014-08
Page17
Change the seat height according the following steps:
1. Remove the rear wheels (see § 2.13).
2. Remove the screw from the plate.
3. Assemble the plate in the right hole of the side
frame, see Table 2.
4. Check if the axle bushings are fastened well.
5. Remove the screw from the front fork and
wheels.
6. Place it according table 2.
7. Install the front wheels and tighten it. Check if it
turn smoothly, but there is no space for motion.
8. Mount the rear wheels.
9. If installed properly the fork of the front wheels
and the ground must be perpendicular. Check
this.
10. Adjust the brakes according § 3.4.
3.4 Adjust the brakes
LWARNING: Risk of injury – Brakes may only be adjusted by your specialist
dealer.
Adjust the brakes according following rules:
1. Install the wheels according § 2.2.
2. Disconnect the brakes by pulling lever 
backwards.

D200
2014-08
Page18
3. Loosen the bolts so the brake
mechanism can slide over the guide .
4. Pull the brake mechanism over the guide to
the desired position.
5. Retighten the bolts .
6. Check working of the brakes.
7. If necessary repeat the above steps until the
brakes are adjusted well.
3.5 Adjusting of the footrest
3.5.1 Length of the footrest
LCAUTION: Risk of damage – Avoid that the footplate make any contact with the
ground. Keep a minimum distance from 60 mm above the ground.
Adjust the length of the footrest as follow (3
positions possible: steps 35 mm →holes outside
tube, 6 positions possible: steps 25 mm →inner
tube):
1. Remove the screw .
2. Adjust the length of the footrest to a
comfortable length.
3. Tighten the screw
properly.
3.5.2 Adjusting angle footplates
Adjust the angle of the footplates as follow:
1. Loosen bolt
.
2. Adjust tube in the desired angle. The angle indication (80°-85°-90°-95°-100°) is
according the dashes .
3. Retighten the bolt .