VESTEL 2310 User manual

- 85 -
7
9
Contents
Remote Control Buttons ......................... 86
Control Panel Buttons ............................ 87
Preparation ............................................. 88
Features ............................................... 88
Installation Of The TFT TV
To The Wall .......................................... 88
Safety Precautions ................................. 90
Before Switching On our TV ................ 91
Power Connection ............................... 91
Connections To The RF Input ocket .. 91
How To Connect Other Devices ........... 91
Inserting Batteries In The Remote
Control Handset ................................... 92
Switching The TV ON/OFF ...................... 92
To switch the TV on: ............................. 92
To switch the TV off: .............................. 92
Operating The TV .................................... 92
Initial A.P. . (Automatic
Programming ystem) ........................ 92
Operating with the buttons
on the TV set ........................................ 93
Operating With Remote Control .......... 93
Menu System .......................................... 94
Picture menu ........................................ 94
Audio menu .......................................... 94
Feature menu ....................................... 95
Window menu ...................................... 96
Options menu ...................................... 96
ettings menu ...................................... 97
ource menu ....................................... 99
Other Features ........................................ 99
TV tatus .............................................. 99
ound Indicator .................................... 99
Mute Indicator ....................................... 99
AV Modes .............................................. 99
Teletext .................................................. 100
To Operate Teletext ............................ 100
To elect A Page Of Teletext ............... 100
To elect Index Page ......................... 100
To elect Teletext With A
TV Programme ................................... 100
To elect Double Height Text ............. 100
To Reveal Concealed Information ... 100
To top Automatic Page Change ....... 100
To elect A ubcode Page ................. 101
Fastext ................................................ 101
To Exit Teletext .................................... 101
To Display The Time .......................... 101
Connect Peripheral Equipment ........... 101
Via The Euroconnector ...................... 101
Via Ant Input ........................................ 102
Decoder.............................................. 102
TV And Video Recorder ...................... 102
Playback NT C .................................. 102
earch For And tore The Test
ignal Of The Video Recorder ........... 102
Camera And Camcorder .................... 102
Connect The Decoder To The
Video Recorder .................................. 102
Digital Audio Out ................................. 103
Connecting Headphones .................. 103
Tips ........................................................ 103
Care Of The creen ........................... 103
Poor Picture ........................................ 103
No Picture ........................................... 103
ound ................................................. 103
Remote Control .................................. 103
No solution ......................................... 103
Peripheral Equipment Connections .... 104
Antenna Connections ........................... 105
Specifications ....................................... 106
TV HOW TO WATCH A TV
When TV set is turned on press TV button on the Remote Control.
03-ENG-2310W-5019UK-MB18-(01-TV)-(DIVX-MT1389-E)-WM-WO_PC-5009xxxx.p65 20.11.2006, 10:0385

- 86 -
7
9
Remote Control Buttons TV MODE
= Stand By
DTV = No function
0 - 9 = Direct Programme
P/CH + = Programme Up
- P/CH = Programme Down
M = Menu
V + = Volume Up
= Cursor Up
= Cursor Right
= Cursor Down
Blue utton
Yellow utton
= Switch to TV Mode.
(This utton will not function while in DVD mode.)
= Personal preference (colour settings)
INFO/ = Info
= Hold
= Update
= Mix
= Index Page
= Reveal
= Expand
= Teletext
= Time / Su code page
AV = External Source
(AV-1, RGB1, AV-2, SVHS, DVD)
=Previous Programme
Green utton
Red utton
OK = Okay (Store)
= Cursor Left
V - = Volume Down

= Mute

I-II = Mono/Stereo - Dual I-II

- / - - = No function

TV = TV
99

79
,1)2
'9'
5(3($7
'79




',63/$<
=220
$%& '() *+,
-./ 012 345
678 9:; <=
(;,7
6(/(&7
5(7851
68%7,7/(
7979
$8',2
$1*/(
$9 33 33
352*5$0 7,0( 6($5&+02'(
$%
&
:,'( *8,'( 23(1&/26(
68%7,7/(
3
3
'0(18


































7,7/(
Remark that to be able to use TV functions by using remote controller
first of all press TV button on the remote controller.
03-ENG-2310W-5019UK-MB18-(01-TV)-(DIVX-MT1389-E)-WM-WO_PC-5009xxxx.p65 20.11.2006, 10:0386

- 87 -
7
9
Control Panel Buttons
3&+
0(18
79$9
/('
63($.(563($.(5
,1)5$5('5(&(,9(5
32:(5
212))
92/80(
)227723&29(5
'9'/2$'(5
03-ENG-2310W-5019UK-MB18-(01-TV)-(DIVX-MT1389-E)-WM-WO_PC-5009xxxx.p65 20.11.2006, 10:0387

- 88 -
7
9
Preparation
Install Display on solid horizontal surface such
as a table or desk.
For ventilation, leave a space of at least 10 cm
free all around the set. To prevent any fault
and unsafe situations, please do not place
any objects on top of the set.
Features
 Remote controlled colour television.
 100 programmes from VHF, UHF bands or
cable channels can be preset.
 It can tune to cable channels.
 Controlling the TV is very easy by its menu
driven system.
 It has an Euroconnector socket for an exter-
nal device (such as video, video games, au-
dio set, etc.)
 tereo sound system (German+Nicam).
 Full function Teletext (Fastext, Toptext)
 Headphone connection.
 Direct channel access.
 A.P. . (Automatic Programming ystem).
 All programmes can be named.
 Programme swapping between the last two
programmes.
 Forward or backward automatic tuning.
 leep timer.
 Child Lock
 Automatic sound mute when no transmis-
sion.
 Auto, Fill all (16:9), 4:3, Cinema, ubtitle and
Panoramic modes.
 NT C Playback.
 AV in is available.
 VH is available.
 AVL (Automatic Volume Limiting)
 When no valid signal is detected, after 5 min-
utes the TV switches itself automatically to
stand-by mode.
 PLL (Frequency earch)
 4H Comb Filter
 DVD / VCD / CD / MP3 / DIVX playback.
Installation Of The TFT TV To The
Wall
1- To install the TFT TV on the wall, first of all,
foot assembly should be removed. Un-
screw the 2 screws that attach the foot top
cover and the 4 screws that attach the foot
to the TFT panel and remove the foot as-
sembly from the TFT panel.
7)73DQHO
)RRW
)RRW7RS&RYHU
2- Place the 4 hangers to the circular screw
holes at the rear of the TFT and screw them
to the TFT panel with 4 (M4 x 10) screws.
3- Decide the place on the wall where the TFT
panel would be placed. Level and mark with
a pencil the 4 mounting points on the wall
hanger. Drill pilot holes for the plastic an-
chors and then fix the wall hanger with 4
screws (4 x 30).
4- Raise the TFT panel and hang it to the holes
on the wall bracket from the 4 hanging
screws at the rear of the TFT panel.
03-ENG-2310W-5019UK-MB18-(01-TV)-(DIVX-MT1389-E)-WM-WO_PC-5009xxxx.p65 20.11.2006, 10:0388

- 89 -
7
9
7)73DQHO
6FUHZV
0[
3ODVWLF3LQV
:DOO+DQJHU
:DOO
6FUHZV
[ 3ODVWLFDQFKRUV
03-ENG-2310W-5019UK-MB18-(01-TV)-(DIVX-MT1389-E)-WM-WO_PC-5009xxxx.p65 20.11.2006, 10:0389

- 90 -
7
9
Safety Precautions
Please read the following recommended
safety precautions carefully for your safety.
1. Power
 Always use the provided AC adaptor.
 Operate only from the power source speci-
fied on the AC adaptor.
 In using, the AC adaptor gets heat on the
surface of the case. It is normal, not defec-
tive.
 Do not cover the case of AC adaptor with any
material while it is in operation. Leave 15 cm
space (minimum) around the AC adaptor.
 The rating information and safety caution of
the AC adaptor are on its case.
Warning: When the device is not in use for a
long time, disconnect from power.
2.Power Cord
Do not place the set, a piece of turniture, etc.
on the power cord (mains lead) or pinch the
cord. Handle the power cord by the plug Do
not pull out the plug by tugging the cord and
never touch the power cord when your hands
are wet as this could cause a short circuit or
electric shock Never make a knot in the cord
or tie it with other cords. The power cords
should be placed in such a way that they are
not likely to be stepped on A damaged power
cord can cause fire or give you an electric
shock. When it is damaged and need to be
changed, it should be done by
qualifiedpersonnel.
3. Moisture and Water
Do not use this equipment in a humid and
damp place (avoid the bathroom, the sink in
the kitchen, and near the washing machine).
Do not expose this equipment to rain or water,
as this may be dangerous and do not place
objects filled with liquids, such as flower vases,
on top of the set.Avoid from dripping or splash-
ing. If any solid object or liquid falls into the
cabinet, unplug the set and have it checked
by qualified personnel before operating it any
further.
4. Cleaning
Before cleaning, unplug the adaptor from the
wall outlet. Do not use liquid or aerosol clean-
ers. Use soft and dry cloth.
5. Ventilation
The slots and openings on the back cover are
intended for ventilation and to ensure reliable
operation. To prevent overheating, these open-
ings must not be blocked or covered in any-
way.
. Heat and Flames
The set should not be placed near to naked
flames and sources of intense heat, such
as an electric heater. Ensure that no naked
flame sources, such as lighted candles, are
placed on top of the set.
7. Lightning
In case of storm and lightning or when going
on holiday, disconnect the power cord from
the wall outlet.
8. Replacement Parts
When replacement parts are required, be sure
the service technician has used replacement
parts which are specified by the manufacturer or
have the same specifications as the original one.
Unauthorised substitutions may result in fire,
electrical shock, or other hazards.
9. Servicing
Please refer all servicing to qualified person-
nel. Do not remove the cover yourself as this
may result in an electric shock.
6XUHO\FRQQHFW
WKHJURXQGZLUH
Be sure to ground the connection properly.
Connect the ground terminal of the AC adaptor with the ground
terminal provided at the power outlet using the enclosed power cord. If the
provided plug does not fit your outlet, consult an electrician for replacement
of the obsolete outlet.
03-ENG-2310W-5019UK-MB18-(01-TV)-(DIVX-MT1389-E)-WM-WO_PC-5009xxxx.p65 20.11.2006, 10:0390

- 91 -
7
9
Instructions for waste disposal:
 Packaging and packaging aids are recy-
clable and should principally be recycled.
Packaging materials, such as foil bag, must
be kept a ay from children.
 Battery, including those hich is heavy metal-
free, should not be disposed of ith house-
hold aste. Please dispose of used battery
in an environmentally sound manner. Find
out about the legal regulations hich apply
in your area.
 Cold cathode fluoresant lamp in LCD PANEL
contains a small amount of mercury, please
follo local ordinates or regulations for dis-
posal.
The mains plug of the power supply is used
as disconnect device and therefore shall re-
main readily operable.
DO NOT LEAVE OUR SET AT STAND-B OR
OPERATING WHEN OU LEAVE OUR
HOUSE
Warning: To prevent injury, this device must
be securely attached to the floor/wall in accor-
dance with the installation instructions.
Before Switching On Your TV
Power Connection
$&DGDSWHU
7R3 2: ( 5
,1387'&9
WHUPLQDO
IMPORTANT: The TV set is designed to oper-
ate on 230 V AC. For this, an adaptor is used
which gives 24 V DC voltage. Connect this
adaptor to a system that supplies 230V AC,
50 Hz.
 After unpacking, allow the TV set to reach the
ambient room temperature before you con-
nect the set to the mains.
Connections To The RF Input
Socket
9+)8+)
 :
5($52)7+(79
&$%/(79
 Connect the aerial or cable TV plug to the RF
input socket located at the rear of the TV and
connect the cable plug coming out from the
TV out socket located on the devices (VCR,
DVB etc.) to this socket as well.
How To Connect Other Devices
IMPORTANT: witch off the TV before connect-
ing any external device.
ockets for external connections are at the
rear side of the TV. For connection of other
devices via Euroconnector refer to the manu-
als of the related devices.
03-ENG-2310W-5019UK-MB18-(01-TV)-(DIVX-MT1389-E)-WM-WO_PC-5009xxxx.p65 20.11.2006, 10:0391

- 92 -
7
9
Inserting Batteries In The Remote
Control Handset
 Remove the battery cover located on the back
of the handset by gently pulling upwards from
the indicated part.
 Insert two AAA (R03) or equivalent type of
batteries inside.
 Replace the battery cover.
NOTE: Remove the batteries from remote con-
trol handset hen it is not to be used for a long
period.Other ise it can be damaged due to
any leakage of batteries.
Switching The TV O /OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power supply cord to the sys-
tem. Press the   button on the right side
of the TV. Then the TV switches itself to stand-
by mode and the led becomes red located
on the front of the TV.
2- To switch on the TV from stand-by mode
either:
Press a digit button on the remote control so
that a programme number is selected,
or,
Press the -P/CH or P/CH+button on the right
side of the TV or press the -P/CH or P/CH+
button on the remote control, so that the last
programme switched off is selected.
Either way the TV will switch on and the LED
becomes green.
To switch the TV off:
 Press the   button on the remote control,
so the TV will switch to stand-by mode and
the GREEN LED will become RED,
or,
 Press the   button located on the right
side of the TV, so the TV will switch off and
the GREEN LED will turn off.
NOTE: To switch the TV off completely remove
the mains plug from the socket.
Operating The TV
You can operate your TV using both the re-
mote control handset and onset buttons.
Remark that to be able to use TV functions
by using remote controller first of all press
TV button on the remote controller.
Initial A.P.S. (Automatic
Programming System)
The following menu will be displayed on the
screen when you turn on your TV for the first
time. A.P. ., searches and sorts all channels
and stores them automatically on your TV, ac-
cording to the transmission of programme
systems in your area.
GRZQIRU$36
$36
FRXQWU\
$36
$XVWULD
ODQJXDJH (QJOLVK
To cancel A.P. . before starting, press the  
button. First of all choose language and coun-
try by using   /   and   /   buttons.
This, will effect the sort process in A.P. . To
start aps, select A.P.S. by using   /   but-
tons and press the   button. The following
warning is displayed.
,1,7,$/$36:$51,1*
3OHDVH&KHFN
WKH$QWHQQD&DEOH
0!WRFDQFHO 2.!WRVWDUW
If you want to cancel A.P. . function, press the
M button.
If OK button is pressed, A.P. . starts and the
following warning is displayed.
03-ENG-2310W-5019UK-MB18-(01-TV)-(DIVX-MT1389-E)-WM-WO_PC-5009xxxx.p65 20.11.2006, 10:0392

- 93 -
7
9
$36LVUXQQLQJ
3OHDVH:DLW
0!WRH[LW
After A.P. . is finalized, Program Table will be
displayed on the screen. In the Program Table
you will see the programme numbers and
names assigned to the programmes.
Operating with the buttons on the
TV set
Volume setting and programme selection can
be made by using the buttons at the control
panel on the right side of the TV.
Volume Setting
Press the -  button to decrease volume
or the  + button to increase volume, so a
volume level scale (slider) will be displayed
on the screen.
Programme Selecting
Press the P/CH + button to select the next
programme or the - P/CH button to select the
previous programme.
Entering Main Menu
Press MENU button to enter Main menu. In
the Main menu select submenu using
- P/CH or P/CH + button and enter the sub-
menu using -  or  + button.
AV Mode
Press the TV / AV button at the control panel
on the right side of the TV to switch your TV to
AV modes.
Operating With Remote Control
Remark that to be able to use TV functions
by using remote controller first of all press
TV button on the remote controller.
The remote control handset of your TV is de-
signed to control all the functions of the model
you selected. The functions will be described
in accordance with the menu system of your
TV.
Functions of the menu system are described
in Menu ystem section.
Remote Control Functions
Your remote control is designed to control your
TV and DVD player together. In order to accses
the TV processes (with white indicators on
the remote control), first of all press to "TV"
button. Than all the TV functions are available
to use. In the same way to control the DVD
player, firstly you must press the "DVD" button.
After than, the buttons are available to pro-
cess the DVD functions, with blue coloured
indicators. To access the TV functions again
you must press the "TV" button once more.
The "DVB" button has no function in your
TV_DVD.
Volume Setting
Press the V + button to increase volume.
Press the - V button to decrease volume. A
volume level scale (slider) will be displayed
on the screen.

Programme Selecting
(Previous or next programme)
 Press the - P button to select the previous
programme.
 Press the P+ button to select the next
programme.
Programme Selecting (direct access):
Press digit buttons on the remote control
handset to select programmes between 0 and
9. The TV will switch to the selected
programme after a short delay.
 For a two digit program number enter the
second digit after pressing the first digit within
2 seconds.
03-ENG-2310W-5019UK-MB18-(01-TV)-(DIVX-MT1389-E)-WM-WO_PC-5009xxxx.p65 20.11.2006, 10:0393

- 94 -
7
9
Menu System
Your TV has been designed with a menu sys-
tem to provide easy manipulation of a multi-
function system. Press the M (MENU) but-
ton to enter the menu. The M button has two
functions; opening or closing the menu and
closing the submenu and then opening its
parent menu.
Press   /   button to select a menu title
and then   /   button to select a menu
item and   /   button to enter the menu
item. To exit a menu press the M button.
Picture menu
By pressing   /   button, select the first
icon. Picture menu appears on the screen.
GRZQIRUSLFWXUHVHWWLQJV
EULJKWQHVV
FRQWUDVW
VKDUSQHVV
FRORXU
SLFWXUH

ILOWHU VKDUS



brightness
By pressing   /   button, select bright-
ness. Press   button to increase brightness.
Press   button to decrease brightness.
Brightness level can be adjusted between 0
and 100.
contrast
By pressing   /   button, select contrast.
Press   button to increase contrast. Press
 button to decrease contrast. Contrast level
can be adjusted between 0 and 100.
filter
By pressing   /   button, select filter.
Press   /   button to change filter setting
to normal, sharp or sharpest. This function
allows user to choose the level of image
sharpness that changes the details of picture
display.
sharpness
By pressing   /   button, select sharp-
ness. Press   button to increase sharp-
ness. Press   button to decrease sharp-
ness. harpness level can be adjusted be-
tween 0 and 100.
colour
By pressing   /   button, select colour.
Press   button to increase colour. Press
 button to decrease colour. Colour level
can be adjusted between 0 and 100.
When the TV is in AV mode; picture menu items
(brightness, contrast, filter, sharpness and
colour) may require re-adjustment.
tint (optional)
This item is displayed in picture menu when
the TV receives an NT C signal. By pressing
 /   button, select tint. Press   button
to increase tint. Press   button to decrease
tint. Tint level can be adjusted between 0 and
100.
GRZQIRUSLFWXUHVHWWLQJV
EULJKWQHVV
FRQWUDVW
VKDUSQHVV
FRORU
SLFWXUH

ILOWHU VKDUS



WLQW 
Audio menu
By pressing   /   button, select the sec-
ond icon. Audio menu appears on the screen.
GRZQIRUDXGLRVHWWLQJV
YROXPH
EDODQFH
H[WHQGHGDXGLRIHDWXUHV
DXGLR
$9/ RQ
RII


volume
03-ENG-2310W-5019UK-MB18-(01-TV)-(DIVX-MT1389-E)-WM-WO_PC-5009xxxx.p65 20.11.2006, 10:0394