VEVOR SJ25 User manual

- 1 -
Technical Support and E-Warranty Certificate www.vevor.com/support
MECHANICAL SCISSOR JACK
MODEL:SJ25
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 2 -
MODEL:SJ25
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
MECHANICAL
SCISSOR JACK

- 3 -
TECHNICAL PARAMETERS
SAFETY PRECAUTIONS
These instructions. For your safety, please read, understand and follow
the information contained within before use. The owner and operator shall
have an understanding of this product and safe operating procedures
before attempting to use. Instructions and safety information shall be
conveyed in the operators native language before use is authorized. Make
certain that the operator thoroughly understands the inherent dangers
associated with the use and misuse of the product. If any doubt exists as to
the safe and proper use of this device as outlined in this factory authorized
manual, remove from service until which time it is clear. This jack is not
suitable for use in lifting, leveling and/or positioning houses, construction
trailers and dwellings in general. Inspect before each use. Do not use if
cracked, broken, bent or otherwise damaged parts are noted or if the jack
is suspected to have been subjected to a shock load. Discontinue use until
checked out by an authorized factory service center. Owner and operators
of this device shall be aware that no serviceable or replaceable parts are
available for this device. Do not attempt to weld, rivet or otherwise repair
this device. It is recommended that an annual inspection be done to this
device by qualified persons and that missing or damaged labels,
warning/safety decals be replaced with ones that are factory authorized.
Always reference the Product .
Brand
Vevor
Model
SJ25
Max. Capacity（lbs）
5511
Lifting Range（mm）
95-435
Product Size (mm)
530*140*130
Net Weight（kg）
4.2KG

- 4 -
Label and Owner’s Manual to establish rated capacity.
WARNING!
Study, understand, and follow all printed materials provided with and
on this device. Do not use this product before reading and understanding
the owner's changing procedures as outlined in the vehicle owners manual
or tire changing compartment of the vehicle. Do not exceed rated capacity
Use only on hard, level surfaces capable of sustaining rated capacity loads.
Use for emergency tire changing only. Never put any body portion under a
vehicle supported by the jack. Activate the hazard warning flasher, turn off
the ignition, set the parking brake, and move the automatic transmission to
the park position. In the case of a manual transmission, put it in reverse
gear if the car is facing downhill and the lowest gear if the car is facing
uphill. In addition, the wheel diagonally opposite from the wheel being lifted
shall be choked in both directions. Lift only on areas of the vehicle as
specified by the vehicle manufacturer. Follow tire-changing procedures as
per the vehicle owner's manual. Use ONLY the provided operating handle
or factory replacement. Failure to heed these messages may result in
personal injury and/or property damage.ay result in personal injury and/or
property dasmage.

- 5 -
PRODUCT STRUCTURE DIAGRAM
INSTRUCTION FOR USE
OPERATION
Lifting (refer to Fig 1,)
1. Place vehicle in park, with emergency brake on and the wheel diagonally
opposite from the wheel being lifted chocked in both directions.
2. Insert the handle into the the hole of the handle socket. Center the
saddle under lift point. Jack shall be positioned perpendicular to the
vehicle’s rolling axis.
3. Hold the straight portion of the hooked shaft with one hand while turning
the L-shaped handle clockwise.
4. Continue to crank it until you reach the desired height, but never beyond
a point just high enough to remove and install the tire.

- 6 -
MAINTENANCE
Lubrication
Lubricate the thread and bearing with wheel bearing grease. A periodic
coating of light lubricating oil to pivot points, axles and hinges will help to
prevent rust and assure parts motheve freely.
Note: Never apply lubricant directly on top of saddle.
Cleaning
Periodically check the jack for signs of rust and corrosion.
Storage
When not in use, store the jack with saddle fully lowered.
SCOPE OF APPLICATION
This jack is intended for lifting and temporary support of vehicle for
emergency tire changing only and used for any other purpose may result in
serious injury or property damage.
Made In China

- 7 -

Technical Support and E-Warranty Certificate
www.vevor.com/support
Made in China