Viavi mA-3011 User manual

mA-3011
AXIe Embedded Host Module
Operation Guide

VIAVI Solutions
1-844-GO-VIAVI
www.viavisolutions.com
mA-3011
AXIe Embedded Host Module
Operation Guide
Rev. C0

Rev. C0 mA-3011 AXIe Embedded Host Module Operation Guide
April 2020 Page i
Notice
Every effort was made to ensure that the information in this manual was accurate at the
time of printing. However, information is subject to change without notice, and VIAVI
reserves the right to update content of this manual, or to provide an addendum to this
manual, with information not available at the time that this manual was created.
Copyright/Trademarks
© Copyright 2020 VIAVI Solutions Inc. All rights reserved. No part of this guide may be
reproduced or transmitted, electronically or otherwise, without written permission of the
publisher. VIAVI Solutions and the VIAVI logo are trademarks of VIAVI Solutions Inc.
(“VIAVI”).
AXIe is a registered trademark of the AXIe Consortium.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
PCIe® and PCI Express® are registered trademarks of the PCI-SIG.
PXI is a registered trademark of the PXI Systems Alliance.
LabVIEW™ is a trademark of National Instruments. This publication is independent of
National Instruments, which is not affiliated with the publisher or the author, and does not
authorize, sponsor, endorse or otherwise approve this publication.
Copyright Release
Reproduction and distribution of this guide is authorized for US Government purposes
only.
Terms and Conditions
Specifications, terms, and conditions are subject to change without notice. The provision
of hardware, services, and/or software are subject to VIAVI’s standard terms and
conditions, available at
www.viavisolutions.com/en-us/corporate/legal/terms-and-conditions.
Declaration of Conformity
VIAVI recommends keeping a copy of the Declaration of Conformity that shipped with the
unit with the device at all times.

mA-3011 AXIe Embedded Host Module Operation Guide Rev. C0
Page ii April 2020
Warranty Information
Warranty information for this product is available on the VIAVI website at
https://www.viavisolutions.com/en-us/warranty-information.
California Proposition 65 Position Statement
California Proposition 65, officially known as the Safe Drinking Water and Toxic
Enforcement Act of 1986, was enacted in November 1986. The proposition aims to protect
individuals in the state of California and the state’s drinking water and environment from
excessive exposure to chemicals known to the state to cause cancer, birth defects or other
reproductive harm. The state maintains a list of such chemicals.
Businesses are required to provide a clear and reasonable warning before knowingly and
intentionally exposing individuals in the state of California to a listed chemical. A warning
is not required if the anticipated exposure level will not pose a significant risk of cancer or
is significantly below levels observed to cause birth defects or other reproductive harm.
VIAVI products contain chemicals such as lead and lead compounds that are listed by the
state of California as causing cancer, birth defects or other reproductive harm. However,
VIAVI products are intended for use in occupational settings only and are not for consumer
sale or use. Therefore, exposure to the hazardous chemicals in VIAVI products is
considered “occupational exposure”. Commercial customers who purchase products for
use in occupational settings in the state of California, please refer to
www.P65Warnings.ca.gov for more information on the warning requirements.
Notice:
The information provided in this statement is intended for informational purposes
only and is not intended to be a representation or warranty of any kind, nor is it
intended to modify in any way the terms and conditions of any agreement between
your company and VIAVI, or the rights of either party arising therefrom.

Rev. C0 mA-3011 AXIe Embedded Host Module Operation Guide
April 2020 TOC - i
Contents
Chapter 1 mA-3011 Overview
About the mA-3011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Chapter 2 Controls and Connectors
Controls and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
PCIe Slot(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Audio I/O Connectors (2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Gigabit Ethernet Connector(3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
USB Connectors(4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
DisplayPort Connector(5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Chapter 3 Setup and Installation
Upon Receipt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Unpack the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Verify Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Inspect the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Module Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Verify Module Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Contents
mA-3011 AXIe Embedded Host Module Operation Guide Rev. C0
TOC - ii April 2020
Chapter 4 Operation and Control
mA-3011 Operating System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
Module Power On/Off Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
Power On Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
Power Down Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
BIOS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
Accessing mA-3011 Module Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
Recommended Browsers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
mA-3011 Web Browser UI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
Chassis Web Browser UI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
mA-3011 Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Network Connection Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
mA-3011 Default IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Locate mA-3011 IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Chapter 5 mA-3011 Web Browser UI
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Recommended Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Open the mA-3011 Web UI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
mA-3011 Web UI Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3
Web UI Pages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4
Home Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4
CPUC Networking Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5
Chapter 6 Care and Maintenance
Maintaining the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2
Storing the Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2
Visual Inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2
External cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-3
Firmware/Software Upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-3
Module Removal/Installation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
Removing the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
Shipping the mA-3011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Return Authorization (RA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Tagging the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Shipping Containers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Freight Costs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Packing Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

Contents
Rev. C0 mA-3011 AXIe Embedded Host Module Operation Guide
April 2020 Page 4-iii
Appendix A Specifications
Unit Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Safety and Compliance Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Contents
mA-3011 AXIe Embedded Host Module Operation Guide Rev. C0
Page 4-iv May 2020
This page intentionally left blank.

Rev. C0 mA-3011 AXIe Embedded Host Module Operation Guide
April 2020 LOF - i
Figures
Figure 1-1 mA-3011 Embedded Host Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Figure 1-2 mA-3011 Embedded Host Module - Dual Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Figure 2-1 mA-3011 Front Panel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Figure 2-2 mA-3011 Front Panel Connectors (Dual Configuration). . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Figure 2-3 Solid State Drive Access Slots (Dual Configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Figure 3-1 Example mA-3011 Operating System Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Figure 3-2 mA-3011 and Chassis Connection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Figure 4-1 CPUC Networking Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Figure 5-1 mA-3011 Web Browser UI - Home Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Figure 5-2 mA-3011 Web UI Home Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Figure 5-3 CPUC Networking Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Figure 5-4 Scan for Chassis Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Figure 6-1 Auto-Run Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Figure 6-2 VIAVI Software Upgrade Tool Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Figure 6-3 Securing Latch - Locked Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Figure 6-4 Securing Latch - Unlocked Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Figure 6-5 Securing Latch - Unlocked and Unlatched. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Figures
mA-3011 AXIe Embedded Host Module Operation Guide Rev. C0
LOF - ii April 2020
This page intentionally left blank.

Rev. C0 mA-3011 AXIe Embedded Host Module Operation Guide
April 2020 LOT - i
Tables
Table A-1 Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Table A-2 Operating and Storage Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Table A-3 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Table A-4 Safety Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Table A-5 EMC Compliance Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Tables
mA-3011 AXIe Embedded Host Module Operation Guide Rev. C0
LOT - ii April 2020
This page intentionally left blank.

Rev. C0 mA-3011 AXIe Embedded Host Module Operation Guide
April 2020 Preface - i
About this Guide
This prefix explains how to use this manual. Topics discussed include the following:
• Purpose and Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
• Intended Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
• Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
• Related Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
• Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
• Safety and Compliance Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
• Safety Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv
• Equipment Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi
• Electrostatic Discharge (ESD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi
• Case/Cover Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi
• Ventilation Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
• Electromagnetic Interference (EMI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

About this Guide
mA-3011 AXIe Embedded Host Module Operation Guide Rev. C0
Preface - ii April 2020
Purpose and Scope
This document contains safety information and instructions for installing and operating the
mA-3011 AXIe Embedded Host Module. Refer to the mA-1302/mA-1305 AXIe Chassis
Operation Manual for Chassis installation and operating instructions.
Intended Audience
This manual is intended for personnel who are familiar with AXIe systems and associated
equipment and terminology.
Terminology
The terms mA-3011, device and module are used in this document to refer to the mA-3011
AXIe Embedded Host Module.
Related Information
This document and other Configurable Modular Platform (CMP) publications can be found
on the VIAVI website at https://www.viavisolutions.com/en-us/products/modular-axie.
The following publication is referenced in this document:
•mA-1302/mA-1305 AXIe Chassis Operation Manual, #141171
Contact Information
Contact Customer Service for technical support or with any questions regarding this or any
other VIAVI products.
VIAVI Solutions
Customer Service Department
10200 West York Street
Wichita, KS 67215
Telephone: [phone]
Fax: [phone]
email: [e-mail]

About this Guide
Rev. C0 mA-3011 AXIe Embedded Host Module Operation Guide
April 2020 Preface - iii
Safety and Compliance Information
Conventions
The following symbols and markings are used throughout documentation and on the
Chassis.
Table 1 Safety Conventions
This symbol indicates a note that includes important supplemental
information or tips related to the main text.
This symbol represents a general hazard. It may be associated with either
a DANGER, WARNING, CAUTION or ALERT message. Refer to
accompanying information and/or documentation.
This symbol indicates a toxic hazard. Item should only be handled by
Qualified Service Personnel. Dispose of item in accordance with local
regulations.
This symbol indicates an item is sensitive to Electrostatic Discharge (ESD).
An item identified as ESD sensitive should only be handled by Qualified
Service Personnel.
This symbol indicates the item meets the requirements of the applicable
European Directives.
Table 2 Safety Definitions
Term Definition
CAUTION Identifies conditions or activities that, if ignored, can result in
equipment or property damage, e.g., Fire.
Mise en Garde Identifiez les conditions ou les activités qui, si ignorées, peuvent
entraîner des dommages à l’équipement ou aux biens, p. ex. un
incendie.
WARNING Identifies conditions or activities that, if ignored, can result in personal
injury or death.
Avertissement Identifiez les conditions ou les activités qui, si ignorées, peuvent
entraîner des blessures personnelles voire mortelles.

About this Guide
mA-3011 AXIe Embedded Host Module Operation Guide Rev. C0
Preface - iv April 2020
Safety Hazards
Toxic Hazards
Beryllia
Beryllium Copper
WARNING
Some of the components used in this Device may include resins and other materials
which give off toxic fumes if incinerated. Dispose of such items appropriately.
Avertissement
Certains des composants utilisés dans cet appareil peuvent comprendre des résines et
d’autres matériaux qui produisent des émanations toxiques lorsqu’ils sont incinérés.
Éliminez adéquatement de tels éléments.
Beryllia (beryllium oxide) is used in the construction of some of the components in this
equipment.
This material, when in the form of fine dust or vapor and inhaled into the lungs, can cause
a respiratory disease. In its solid form, as used here, it can be handled safely, however,
avoid handling conditions which promote dust formation by surface abrasion.
Use care when removing and disposing of these components. Do not put them in the
general industrial or domestic waste or dispatch them by post. They should be separately
and securely packed and clearly identified to show the nature of the hazard and then
disposed of in a safe manner by an authorized toxic waste contractor.
CAUTION
Some mechanical components within this instrument are manufactured from beryllium
copper. Beryllium copper represents no risk in normal use. The material should not be
machined, welded or subjected to any process where heat is involved.
Beryllium copper must NOT be disposed of by incineration. Beryllium copper must be
disposed of as “special waste” per local regulations.

About this Guide
Rev. C0 mA-3011 AXIe Embedded Host Module Operation Guide
April 2020 Preface - v
Lithium
Electrical Hazards
Grounding the Module
The Chassis is provided with a protective grounding lead that conforms with IEC Safety
Class I. The supply lead must always be connected to the power supply via a grounded
contact in order to maintain the grounding protection. The Chassis must be properly
grounded to prevent damage to the device from electrostatic discharge (ESD).
A Lithium battery is used in this equipment. Lithium is a toxic substance so the battery
should in no circumstances be crushed, incinerated or disposed of in normal waste. Do
not attempt to recharge this type of battery. Do not short circuit or force discharge since
this might cause the battery to vent, overheat or explode.
CAUTION
This device contains a Lithium Battery and may require special packaging and external
labeling when shipping. Contact Customer Service for packaging and labeling
instructions.
Mise en Garde
Cet appareil contient une batterie au lithium et peut nécessiter un conditionnement
spécial et un étiquetage externe lors de l’expédition. Communiquez avec le service à la
clientèle pour les instructions d’emballage et d’étiquetage.
WARNING
Improper grounding of equipment can result in electrical shock. To ensure proper
grounding, this Device should only be connected to a grounded AC Power Supply.
Avertissement
La mise à la terre inadéquate de l’équipement peut entraîner un choc électrique. Pour
s'assurer d’une mise à la terre adéquate, cet appareil doit seulement être branché à
une alimentation électrique CA mise à la terre.

About this Guide
mA-3011 AXIe Embedded Host Module Operation Guide Rev. C0
Preface - vi April 2020
Equipment Usage
This Device is designed and tested to comply with the requirements of ‘IEC/EN 61010-1,
3rd Edition Safety Requirements for Electrical Equipment for Measurement, Control and
Laboratory Use’ for Class I portable equipment and is for use in a pollution degree 2
environment.
Electrostatic Discharge (ESD)
Case/Cover Removal
WARNING
Operating this Device in a manner not specified in accompanying documentation may
impair the safety protection built into the Device.
Avertissement
Utiliser cet appareil de manière non spécifiée dans la documentation
d'accompagnement peut nuire au dispositif de protection de sécurité intégré dans
l’appareil.
CAUTION
Modules are ESD sensitive and should only be installed, removed and/or serviced by
Qualified Service Personnel.
Mise en Garde
Les modules sont sensibles aux DES et ils doivent seulement être installés, enlevés ou
entretenus par du personnel de service qualifié.
CAUTION
This Device does not contain user serviceable parts. Servicing should only be performed
by Qualified Service Personnel.
Mise en Garde
Cet appareil ne contient pas de pièces pouvant être entretenues par l’utilisateur.
L’entretien doit seulement être effectué par du personnel de service qualifié.

About this Guide
Rev. C0 mA-3011 AXIe Embedded Host Module Operation Guide
April 2020 Preface - vii
Ventilation Requirements
The Chassis is cooled by the unit's internal fans which pull air across the modules from
right to left. Failure to provide proper ventilation may result in damage to the Chassis and
any modules installed in the Chassis. Observe the following precautions when operating
the Chassis:
CAUTION
Do not operate the Chassis with empty slots. Install Filler modules in empty slots to
ensure proper airflow through the Chassis.
Do not obstruct air flow to the air vents.
Do not place the Chassis on or close to other heat-generating equipment.
Mise en Garde
N’utilisez pas le châssis avec des fentes vides. Installez des modules de remplissage
dans les fentes vides afin d'assurer un écoulement d’air adéquat dans le châssis.
N’obstruez pas l’écoulement d’air vers les évents.
Ne placez pas le châssis sur ou près de tout autre équipement générant de la chaleur.