Viavi MTS/T-BERD TB6000A V2 Technical manual
Page 1 of 13
Viavi MTS/T-BERD TB6000A V2
Mainframe & BERT Module
Software Update Instructions
September 29, 2017
Table of Contents
Scope................................................................................................................................................................ 2
1. Network Upgrade ..................................................................................................................................... 2
2. USB Upgrade ........................................................................................................................................... 7
3. StrataSync............................................................................................................................................... 11
Page 2 of 13
Scope
There are three methods to update T-BERD 6000A V2 software:
1. Network upgrade - Use this method to update your T-BERD via an Internet connection.
2. USB upgrade - Use this method to update your T-BERD with a USB thumb drive.
3. StrataSync upgrade - Use this method if your T-BERD 6000A V2 is managed using Viavi’s
StrataSync Asset Management system.
The T-BERD must be connected to AC Power, regardless of update method.
1. Network Upgrade
Step Action Details
1. Power On Press and hold the ON/OFF button briefly to turn on the T-BERD 6000A V2.
2. AC Power Connect the AC power adapter to the
power connector on the top of the
T-BERD 6000A V2.
3. LAN Connection Connect the Ethernet Management
Port on the top of the T-BERD 6000A V2
to a network connection with internet
access, using CAT 5E or better cable.
4. Home Press the HOME button, at the right side of the display, to display the HOME
screen selections.
Page 3 of 13
5. Network Settings Press the CONNECTIVITY icon and then the ETHERNET icon to display
LAN Settings. Touch on MODE and select DYNAMIC to “DHCP”for
automatic IP address assignment or “Static” for manual input.
After configuring LAN settings, press the EXIT button, on the right side of
the display to exit back to the Connectivity menu.
6. Upgrade Press the UPGRADE icon, to display upgrade methods.
Page 8 of 13
3. Download From the second selection labelled Download Latest Combo (Fiber Optics
and BERT) click on the flag icon to download the current software revision
from the selected download server. There are choices for North America,
EMEA and APAC servers. Save it to your desktop and wait for the
download to complete.
4. USB Stick Insert a USB thumb drive into the USB port on your PC or laptop.
5. Extract Open and run the downloaded file, enter the path of the USB stick, and press
to extract files.
Page 9 of 13
6. Eject Safely eject the USB drive from your PC or Laptop
7. Power on T-BERD Press and hold the ON/OFF button briefly to turn on the T-BERD 6000A V2.
8. Power Connect the AC power adapter to the power connector on the top of the T-
BERD 6000A V2.
9. USB Connect the USB Thumb Drive to one
of the USB ports on the top of the
T-BERD 6000A V2. An 8GB or smaller
drive is recommended.
10. Home Press the Home button, to the right of the display, to display the HOME
Screen selections.
11.
Press the CONNECTIVITY icon and select UPGRADE.
Page 11 of 13
3. StrataSync
Step Action Details
1. Power On Press and hold the ON/OFF button briefly to turn on the T-BERD 6000A V2.
2. AC Power Connect the AC power adapter to the
power connector on the top of the
T-BERD 6000A V2.
3. LAN Connection Connect the Ethernet Management
Port on the top of T-BERD 6000A V2
to a network connection with internet
access, using CAT 5E or better cable.
4. System Press the HOME button, to the right of the display, to display the HOME
screen selections.
5. Network Settings Press the CONNECTIVITY icon and then the ETHERNET icon to display
the LAN Settings. Touch on MODE and select DYNAMIC to “DHCP” for
Page 12 of 13
automatic IP address or “STATIC” for manual input.
After configuring LAN settings, press the EXIT button, on the right side of
the display, to exit back to the CONNECTIVITY screen.
6. StrataSync Press the STRATASYNC icon,, to display StrataSync Settings. Ensure that
Account ID and Technician ID match those of your StrataSync account.
Ensure that the Server Type is set for Viavi Server.
Page 13 of 13
7. Sync Press CONNECT TO STRATASYNC to sync your T-BERD 6000A V2 and
initiate upgrades authorized by your StrataSync System Administrator. If an
upgrade was assigned to your instrument you will be taken to the
UPGRADES menus and you will be asked to confirm the upgrade to start the
download. If you were expecting an upgrade notification and did not receive
one during your sync to Stratasync, contact your company’s Stratasync admin.
Table of contents
Other Viavi Control Unit manuals
Viavi
Viavi mA-3011 User manual
Viavi
Viavi MTS/T-BERD TB6000A V1 Technical manual
Viavi
Viavi SPA06MA-O R005 User manual
Viavi
Viavi MTS/T-BERD TB8000e V2 Technical manual
Viavi
Viavi MSAM User manual
Viavi
Viavi T-BERD/MTS- 2000V2 User manual
Viavi
Viavi SCU-1800 User manual
Viavi
Viavi mA-3A01 User manual
Viavi
Viavi mA-3011 User manual
Viavi
Viavi T-BERD MTS 5800 User manual
Popular Control Unit manuals by other brands
Pepperl+Fuchs
Pepperl+Fuchs SIL KFD0-RSH-1 Safety manual
Nice
Nice TCE Instructions and warnings for the fitter
BENDIX
BENDIX SV-1 SYNCHRO-SV-3 TRAILER RELEASE manual
Feig Electronic
Feig Electronic ID ISC.MRMU102-A installation manual
Automationdirect.com
Automationdirect.com GSDA-CM-8 user manual
inveo
inveo NANO IN user manual
Orbinox
Orbinox TL with bonnet Installation, operation & maintenance manual
IRTrans
IRTrans Ethernet PoE Supplemental user's manual
Siemens
Siemens SIRIUS 3TK2834 operating instructions
Winmate
Winmate M101B Series Quick installation guide
Solinst
Solinst 464 250 psi Replacement
Pickering
Pickering 40-191B user manual
