Viavi SmartOTDR Parts list manual

VIAVI Solutions
Quick Card
T-BERD®/MTS-2000 and SmartOTDR
Fiber License Installation
This quick card outlines how to install a license on the T-BERD/MTS-2000 and SmartOTDR test set for the
following options:
•ESMARTFTTH –FTTH Smart Link Mapper (identification of splitter types, acquisition at short and long
pulse widths to detect all events before and after splitters, pass/fail thresholds per PON standards)
•ESMARTFTTA –FTTA Smart Link Mapper (detection and identification of FTTA network elements)
•ENTERPRISE –Enterprise Smart Link Mapper (Identification of specific elements, pass/fail thresholds and
labeling schemes per Data Center/ Enterprise standards)
•ESMARTCABL –Cable Smart Link Mapper (high-level view for high-density fiber cable certification)
•ESMARTACQ –Smart Acquisition (uses differing pulse widths to characterize the different sections of a
fiber link and combines results into a single view)
•SAA-L2 –Level 2 Smart Access Anywhere (remote connectivity on private networks via cloud-based
server)
Equipment Requirements:
•T-BERD/MTS-2000 or SmartOTDR
•4GB to 16GB USB Flash Drive with license file
Figure 1: Equipment Requirements
License Installation:
1. Press the Power button to turn on the
unit.
2. Press the Home hard key to display the Home
screen.
3. Insert the USB Flash Drive into a USB port under
the flap on the top of the T-BERD/MTS 2000 or
SmartOTDR.
4. Tap the Settings icon in the Home Screen
to access System Settings
Figure 2: Home screen

Contact Us +1 844 GO VIAVI
([phone])
To reach the VIAVI office nearest you,
visit viavisolutions.com/contacts.
© 2018 VIAVI Solutions Inc.
Product specifications and descriptions in this
document are subject to change without notice.
5. In the System Settings screen, tap the Expert
Tools soft key to relabel the soft keys.
Figure 3: System Settings
6. Tap the Install Option soft key
Figure 4: Install Option
7. Tap the Import File soft key .
Note: If a USB Flash Drive is not
connected to the platform, a warning
message is displayed. Tap Confirm once
the USB Flash Drive is connected.
Figure 5: Import File
8. In the File Explorer, select the usbflash drive,
and select the license file (.lic) to be imported.
9. Tap the Load soft key and tap Confirm. Once
the license is imported, you will be prompted
to reboot.
10. Tap the Reboot soft key to complete
license installation.
Figure 6: Reboot