Viavi OneAdvisor ONA-1000 400G Technical manual

Page 1 of 14
Technical Support [email protected] 1-844-468-4284 option 3, 1, 1
Viavi OneAdvisor ONA-1000 400G
Software Update Instructions
April 29, 2020
Table of Contents
Scope................................................................................................................................................................ 2
1. Network Upgrade ..................................................................................................................................... 2
2. USB Upgrade ........................................................................................................................................... 8
3. StrataSync............................................................................................................................................... 12

Page 2 of 14
Technical Support [email protected] 1-844-468-4284 option 3, 1, 1
Scope
The ONA-1000 platform base software includes software for the 400G module and supported Fiber Optics
modules (OTDR, etc.). The 100G module, for the ONA-1000, is upgraded separately. This procedure
addresses upgrade to the software for the ONA-1000, the 400G module and supported Fiber Optic modules.
To upgrade the ONA-1000 100G module, consult the “ONA-1000 100G software upgrade procedure”.
There are three methods to update ONA-1000 software:
1. Network upgrade - Use this method to update your ONA-1000 via an Internet connection.
2. USB upgrade - Use this method to update your ONA-1000 with a USB thumb drive.
3. StrataSync upgrade - Use this method if your ONA-1000 is managed using Viavi’s StrataSync
Asset Management system and your company has elected to deploy software via this method.
The ONA must be connected to AC Power, regardless of update method. Please note that network upgrades
are NOT supported over WiFi.
1. Network Upgrade
Step Action Details
1. Power On Press and release the ON/OFF button to turn on the ONA-1000.
2. AC Power Connect the AC power adapter to the
power connector on the right side of the mainframe.
3. LAN Connection Connect the Ethernet Management
Port, on the right side of the mainframe,
to a network connection with internet
access, using CAT 5E or better cable.
4. System Press the System icon, , at the top of the start-up screen, to display the
System Menu.

Page 3 of 14
Technical Support [email protected] 1-844-468-4284 option 3, 1, 1
5. Network Settings Press the Network icon, , to display LAN Settings. Set IP Mode to
“DHCP”for automatic IP address assignment or “Static” for manual input.
If using a static address, be sure to configure the DNS server for an accurate
address or the upgrade will fail to locate the upgrade server.

Page 4 of 14
Technical Support [email protected] 1-844-468-4284 option 3, 1, 1
After configuring LAN settings, press the System icon, , to redisplay
the System Menu.
6. Upgrade Press the Upgrade icon, , to display upgrade methods.

Page 5 of 14
Technical Support [email protected] 1-844-468-4284 option 3, 1, 1

Page 6 of 14
Technical Support [email protected] 1-844-468-4284 option 3, 1, 1
7. Network Upgrade Press to display upgrade
settings. Press Reset to Default to ensure the server address name is correct.
8. Connect Press to show
the upgrade versions available at upgrademyunit.net.

Page 7 of 14
Technical Support [email protected] 1-844-468-4284 option 3, 1, 1
9. Start Upgrade Press , and press to initiate the upgrade.

Page 8 of 14
Technical Support [email protected] 1-844-468-4284 option 3, 1, 1
2. USB Upgrade
Step Action Details
1. Updatemyunit.net Using an internet browser on your PC or laptop, go to http://updatemyunit.net/
2. ONA-1000 Click on the
to display the OneAdvisor ONA-1000 upgrade page.
3. Download Click on the icon for the desired server to start the download from that server.
There are icons for three servers: EMEA, NORTH AMERICA or APAC
server. For example, North America . Click to download
the current software revision from that server, if prompted. Do NOT save the
download directly to the USB stick. Save to your PC and wait for the
download to complete.
4. USB Stick Insert a USB thumb drive into the USB port on your PC or laptop.
5. Extract Open and run the downloaded file, enter the path of the USB stick, and press
to extract files.

Page 9 of 14
Technical Support [email protected] 1-844-468-4284 option 3, 1, 1
6. Eject Once the extract has completed, safely eject the USB drive from your PC or
Laptop.
7. Power on ONA Press and hold the ON/OFF button to turn on the ONA-1000.
8. AC Power Connect the AC power adapter to the power connector on the right side of the
ONA-1000 mainframe.
9. USB Connect the USB Thumb Drive to one of the USB ports on the ONA-1000
mainframe. An 8GB or smaller drive is recommended.
10. System Press the System icon, , at the top of the start-up screen, to display the
System Menu.

Page 10 of 14
Technical Support [email protected] 1-844-468-4284 option 3, 1, 1
11. Upgrade Press the Upgrade icon, , to display upgrade methods.
12. Select USB Press to display upgrade versions
available on the USB stick.