Victorian Plumbing AREZZO Palermo User manual

Palermo
Fitting Instructions
Please follow them carefully and
leave this manual with end user
V1.10.23

1. We recommend consulting a professional if you are unfamiliar with installing bathroom
fixtures and plumbing. We accept no liability for any damage to the floor, walls, plumbing,
vanity cabinet, sink, counter top, or personal injury during installation.
2. Observe all local plumbing and building codes.
3. Unpack the product then read these instructions before proceeding. And Inspect the sink
for damage. If any damage is found, contact our Customer Relations team.
Ensure that you have gathered all the required materials that are needed for the
installation.
For the following instructions, it is assumed that the countertop is already in place.
Tools Required
Damp Cloth
Silicone
Sealant
BEFORE YOU BEGIN
CLEANING AND MAINTENENCE
GETTING STARTED
Installation Guide
Installing A Washbasin
We recommend that you regularly clean your stone sink with a mild dish detergent or
stone cleaner. After each use, wipe the basin dry with a soft cloth. Do not allow mineral
deposits such as iron, salt, lime, or soap to build up on your sink. Refrain from using acidic
household cleaners, wipes with harsh chemicals, or abrasives, as these will damage
stone.
1. Carefully place the sink upside down on the counter with a towel or other soft
cloth beneath to prevent damage.
2. Apply a continuous bead of silicone to the base of the sink where it will rest
on the counter.
3. Turn the sink right-side-up and position it back over the drain hole.
4. Remove any excess silicone with a damp cloth. Let the silicone dry for 24
hours.
5. Carefully fully install your waste into the cutout of your basin. Refer to the
drain’s installation for guidence.