Victorian Plumbing Arezzo User manual

Bathroom Basin
(Pedestal)
INSTALLATION
INSTRUCTIONS
V1.07.23

Maintenance
Surfaces should be cleaned with a soft cloth and warm soapy
water. Rinse and dry after cleaning, this is extremely
important for the area with hard water.
Under no circumstances should abrasive or acid based
cleaning products be used.
Please follow these care instructions to ensure your
product retains it’s high quality finish and please retain
this leaflet for future reference.
Step 1: Choose Location
Place the basin in the desired location on the floor ensuring it
is approx 100mm from the wall.
Step 2: Mark The Screw Positions
Use a pencil to mark the four screw hole positions on the
floor.
Step 3: Drill Holes
Drill the four holes using an appropriately sized drill bit.
Step 4: Insert The Fixings
Insert the four bolt fixings into the drilled holes.
Step 5: Secure Sink
Place the sink onto the floor ensuring it is located within the
previously marked area. Secure the sink by tightening the
four bolts.

WARNING!
We recommend that this product is installed by a
qualified tradesperson and we accept no liability for
products fitted incorrectly.
Step 6: Connect The Waste Pipe
Connect the sink to the waste system.
www.victorianplumbing.co.uk