Victorian Plumbing Arezzo User manual

V2.12.23
Round Outlet Elbow with Parking
Bracket, Flex & Handset
Fitting Instructions
Please follow them carefully and
leave this manual with end user

V2.12.23
1. We recommend that this product is installed by a qualified tradesperson, Victorian
Plumbing Ltd. accept no liability for products incorrectly installed, or where the correct
testing procedures have not been adhered to, thus resulting in the escape of water and
consequential damage.
2. Ensure the incoming mains water supply is switched o prior to commencing the
installation.
3. Observe all local plumbing and building codes & regulations.
4. Unpack the product then read these instructions before proceeding. Inspect the product for
damage. If any damage is found, contact our Customer Relations team.
Before you begin:
Diagram
Round Outlet Elbow C/w
Handset & Hose
Round Outlet Elbow C/w
Handset & Hose
Make sure that all components are
present prior to installation.
Cut an appropriate sized hole in
the wall if needed, use condenser to
connect to the internal pipe work.
Wrapping PTFE sealing tape onto
the thread, and connect to the water
outlet.
Assemble the handset and hose. Turn
on the water supply, check all the
joints for any leaks.