Viega Eco Plus 8130.2 User manual

Viega Eco Plus
Model Year built:
8130.2 from 03/2014
en_INT
Viega Eco Plus WC element
Instructions for Use

Viega Eco Plus WC element 2 from 23

Table of contents
1About these instructions for use 4
1.1 Target groups 4
1.2 Labelling of notes 4
1.3 About this translated version 5
2Product information 6
2.1 Standards and regulations 6
2.2 Intended use 6
2.2.1 Areas of use 6
2.3 Product description 6
2.3.1 Overview 6
2.3.2 Compatible components 7
2.3.3 Sound protection 9
2.3.4 Technical data 9
3Handling 10
3.1 Assembly information 10
3.1.1 Mounting conditions 10
3.1.2 Installation dimensions 11
3.1.3 Required tools 11
3.2 Assembly 11
3.2.1 Mounting WC element 11
3.2.2 Converting actuation 18
3.2.3 Preparing optional actuation versions 21
3.2.4 Setting the flush volume 22
3.3 Cleaning and maintenance 22
3.4 Disposal 23
Table of contents
Viega Eco Plus WC element 3 from 23

1 About these instructions for use
Trade mark rights exist for this document; for further information, go to
viega.com/legal.
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
nHeating and sanitary professionals and trained personnel
nDrywall builder
Individuals without the abovementioned training or qualification are not
permitted to mount, install and, if required, maintain this product. This
restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
1.2 Labelling of notes
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns of possible life-threatening injury.
WARNING!
This symbol warns of possible serious injury.
CAUTION!
This symbol warns of possible injury.
NOTICE!
This symbol warns of possible damage to property.
This symbol gives additional information and hints.
About these instructions for use
Viega Eco Plus WC element 4 from 23

1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e. g. EN) and/or in Germany
(e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The relevant national laws, stand‐
ards, regulations, directives and other technical provisions take priority
over the German/European directives specified in this manual: The
information herein is not binding for other countries and regions; as said
above, they should be understood as a recommendation.
About these instructions for use
Viega Eco Plus WC element 5 from 23

2 Product information
2.1 Standards and regulations
The following standards and regulations apply to Germany / Europe.
National regulations can be found on the relevant web site of your
country at viega.com/standards.
Regulations from section: Fields of application / Mounting conditions
Scope / Notice Regulations applicable in Ger‐
many
suitable masonry walls EN 1996-1-1
suitable concreted walls DIN 1045
suitable support profiles DIN 18183
Regulations from section: Sound protection
Scope / Notice Regulations applicable in Ger‐
many
Fulfilled noise protection require‐
ments
DIN 4109
Fulfilled noise protection require‐
ments
DIN 4109 (additional sheet 2)
Fulfilled noise protection require‐
ments
VDI 4100 SSt I-SSt II
2.2 Intended use
2.2.1 Areas of use
The Viega Eco Plus WC element is suitable for mounting on masonry
wall constructions and support profiles pursuant to the regulations in
section Ä „Regulations from section: Fields of application / Mounting
conditions“ on page 6.
2.3 Product description
2.3.1 Overview
The WC element is equipped as follows:
Product information
Viega Eco Plus WC element 6 from 23

2
1
9
8
3
5
6
7
4
Fig. 1: Components
1 - Viega Eco Plus WC element
2 - threaded rods for fixing sanitary objects
(gauges for bore hole 180 or 230 mm)
3 - adjustable feet
4 - drain elbow
5 - fixing height for the WC ceramic: 330 mm
6 - Viega concealed cistern 2L
7 - marking 0.7 m above the upper edge of the finished floor
8 - fixing set (not included in the scope of delivery model 8173)
9 - flush actuation site protection
2.3.2 Compatible components
The WC element is compatible with all common WC ceramics, even
with larger projection (barrier-free).
The WC element can be extended by the following compatible compo‐
nents:
nfixing set (model 8173)
nconnection installation set (model 8350.14)
Installation of the WC element into the modular Viegaswift pre-wall
installation system (model 8110.5) is possible.
Product information
Viega Eco Plus WC element 7 from 23

Mount the components in accordance with the respective instructions
for use.
The installation set is suitable for the connection of an electrical actua‐
tion. The installation set consists of an empty pipe, a cavity wall socket
and the relative, required clip. The empty pipe connects the cavity wall
socket with the concealed cistern.
Product Name Model
Standard Flush plate Standard 1 8180.1
Visign for Style Flush plate
Visign for Style 10
8315.1
Flush plate
Visign for Style 11
8331.1
Flush plate
Visign for Style 12
8332.1
Flush plate
Visign for Style 12
8332.4
Flush plate
Visign for Style 13
8333.1
Flush plate
Visign for Style 14
8334.1
Functional unit 8332.3
Visign for More Flush plate Visign for More
100
8352.1
Flush plate Visign for More
101
8351.1
Flush plate Visign for More
102
8353.1
Flush plate Visign for More
103
8355.1
Flush plate Visign for More
104
8354.1
Visign for Care
sensitive
Flush plate sensitive Visign
for Care
8352.21
Visign for More
sensitive
Flush plate sensitive
Visign for More 100
230 V 8352.11
Flush plate sensitive
Visign for More 100
6.5 V 8352.12
Connection installation set
Compatible flush plates
Product information
Viega Eco Plus WC element 8 from 23

Product Name Model
Flush plate sensitive
Visign for More 103
230 V 8355.11
Flush plate sensitive
Visign for More 103
6.5 V 8355.12
Visign for Public Flush plate
Visign for Public 1
8326.1
Flush plate
Visign for Public 2
8327.1
Remote actuation
Visign for Public 1
8326.21
Cover plate Visign for Public 8326.9
2.3.3 Sound protection
The WC element complies with the noise insulation requirements speci‐
fied in section Ä „Regulations from section: Sound protection“
on page 6.
2.3.4 Technical data
Small flush volume Factory setting approx. 3 l
Setting range approx. 3–4 l
Large flush volume Factory setting approx. ca. 6 l
Setting range approx. 6–9 l
Flush volume
Product information
Viega Eco Plus WC element 9 from 23

3 Handling
3.1 Assembly information
3.1.1 Mounting conditions
The Viega WC element is suitable for mounting on masonry wall con‐
structions and support profiles pursuant to the regulations in section
Ä „Regulations from section: Fields of application / Mounting condi‐
tions“ on page 6.
The WC element may only be mounted on even wall surfaces.
With the construction height, the marked height of the upper edge of
the finished floor must be observed.
The installation depth can be between 85 mm and 200 mm.
The WC element can only be used in combination with wall-hung WCs
(fixing gauges for bore hole 180 mm or 230 mm).
The WC element can be extended by a remote actuation
Visign for Public1 (model 8326.21) or by an electronic actuation (model
8350.31 or 8350.32). The corresponding actuation method must be pre‐
pared before the WC element is clad and tiled.
The corresponding empty pipe (included in the scope of delivery of the
remote actuation) is required when preparing the remote actuation
Visign for Public1.
Suitable walls
Construction height
Installation depth
WC ceramic
Actuation
Handling
Viega Eco Plus WC element 10 from 23

3.1.2 Installation dimensions
3.1.3 Required tools
ndrill with 10 mm drill bit
nratchet with sockets: 13 mm / 17 mm
nfork or ring spanner: 10 mm / 13 mm / 17 mm / 19 mm
3.2 Assembly
3.2.1 Mounting WC element
Masonry and concreted walls
You should use a support bracket (model 8165) when
mounting multiple WC elements with an interval of
> 490 mm. Observe the instructions for use of the support
bracket when mounting.
Dimensions
Handling
Viega Eco Plus WC element 11 from 23

Determine and mark fixing points.
nX1: 390 mm (model 8180.73)
nX2: 440 mm (model 8173)
nX3: 810 mm.
Drill holes.
Mount the fixing set with the fork spanner (size 13).
Align the height (size 17) of the WC element in accordance with the
height marking.
Mark fixing points on the floor.
Masonry wall
X3
0-200
X1
X2
0
0-200
0
700
Ø10
560638_B2
13
17
Handling
Viega Eco Plus WC element 12 from 23

Drill holes for fixing on the floor.
Attach WC element to the floor using the fork spanner (size 13) and
the screws and dowels supplied.
Set the installation depth of the pre-wall element (200 mm) with the
fork spanner (size 17).
Mount WC threaded rods (gauges for bore hole 180 or 230 mm).
Clip in drain elbow.
Ø10
13
17
180
230
click
19
Handling
Viega Eco Plus WC element 13 from 23

Install site protection of the flush actuation.
Attach protective caps for threaded rods onto WC ceramic.
Mount protective plug.
Carry out water connection.
Double clad WC element with IFGP cladding panels (model 8055.10)
(2 x 12.5 mm).
2x
Handling
Viega Eco Plus WC element 14 from 23

If necessary, adjust (pre-mounted) foot depth from 75 mm to
50 mm.
Pull the foot out and turn by 90°.
Determine construction height in accordance with the on-site
marking of the upper edge of the finished floor.
Pull WC element up (height marking) and align.
Tighten feet with the fork spanner (size 17).
Mark holes for floor supports.
On-site support profile
75
90°
50
17
0-200
0
700
Handling
Viega Eco Plus WC element 15 from 23

Drill holes.
Attach element to floor (size 13).
Attach WC element to the support profiles using the screws sup‐
plied.
Connect the WC element flush with the support profiles.
Ø10
13
4x
Handling
Viega Eco Plus WC element 16 from 23

Mount WC threaded rods (gauges for bore hole 180 or 230 mm).
Clip in drain elbow.
Install site protection of the flush actuation.
Attach protective caps for threaded rods onto WC ceramic.
Mount protective plug.
If necessary, mount a reducer.
Carry out water connection.
click
180
230
19
Handling
Viega Eco Plus WC element 17 from 23

Strap the support profiles with panel strips ≥ 30 cm.
Double-clad WC element with IFGP cladding panels (model
8055.10) (2 x 12.5 mm).
3.2.2 Converting actuation
Actuation can take place optionally from the front or the top. The actua‐
tion is pre-mounted from the front in delivery condition. To convert
actuation from above, proceed as follows:
Remove lateral cistern cover.
≥ 30
2x
Handling
Viega Eco Plus WC element 18 from 23

Press the bow backwards from the mounting of the mechanism.
Turn the mechanism's lock by 90° in an anti-clockwise direction.
ðThe mechanism is unlocked and can be removed.
Remove mechanism.
Remove upper revision cover.
Handling
Viega Eco Plus WC element 19 from 23

Insert the mechanism into the cistern from above.
In doing so, ensure that the tracks on the top and bottom edge of
the mechanism are in the indentations in the revision shaft of the
cistern.
Turn the mechanism's lock by 90° in a clockwise direction.
ðThe mechanism is locked.
Hang the mechanism in the bow of the drain valve.
Insert cistern cover from above.
Handling
Viega Eco Plus WC element 20 from 23