Viessmann VITOSOL 100-F User manual

VITOSOL 100-F Type SV1 and SH1
Flat-plate collectors for installation on end or across,
for installation on flat and pitched roofs and for freestand-
ing installation.
Type SH1 also for installation on walls.
For heating DHW and swimming pool water via a heat
exchanger.
VIESMANN
Datasheet
Part numbers and prices: see pricelist
VITOSOL 100-F
Flat-plate collector for the utilisation of solar energy
File in: Vitotec folder, register 13
5822 407 GB 8/2007

The selectively coated absorber ensures an even flow through the
entire collector. It ensures a high absorption of solar radiation and
low emission of thermal radiation. A meander-shaped copper pipe
through which the heat transfer medium flows is part of the absor-
ber.
The heat transfer medium absorbs the heat from the absorber via
the copper pipe. The absorber is surrounded by a thermally insu-
lated collector casing.
The high quality thermal insulation provides temperature stability
and is free from gas emissions. The cover comprises a solar glass
pane.
The integral flow and return pipes allow a simple and safe con-
struction, even of larger systems. Up to 12 collectors can be com-
bined to create a single collector array. For this purpose, the
standard delivery includes flexible connecting pipes with O-rings.
A kit with locking ring fittings enables the collector array to be
readily connected to the pipes of the solar circuit. The collector
temperature sensor is mounted in a sensor well set inside the
solar circuit flow.
ASolar glass cover, 3.2 mm
BCover angle made from aluminium
CPane seal
DCopper absorber
EMeander-shaped copper pipe
FThermal insulation made from mineral fibre
GAluminium frame sections
HBack panel made from aluminium-zinc coated sheet steel
Benefits
&Powerful, attractively priced flat-plate collector.
&Universal application for rooftop and freestanding installation,
either on end or across. Up to 10 collectors can be linked in par-
allel.
&High efficiency through selectively coated absorber and cover
made from hail-resistant solar glass.
&Permanently sealed and high stability through all-round folded
aluminium frame and endless pane seal.
&Puncture-proof and corrosion-resistant back panel made from
aluminium-zinc coated sheet steel.
&Easy to assemble Viessmann fixing system with load tested and
corrosion-resistant components made from stainless steel and
aluminium –standard for all Viessmann collectors.
&Quick and reliable collector connection through a flexible corru-
gated stainless steel pipe plug-in connector.
5822 407 GB
2VIESMANN VITOSOL 100-F
Product description

Specification
Type SV1 SH1
Gross area m22.51 2.51
Absorber area m22.32 2.32
Aperture area*1m22.33 2.33
Dimensions
Width a mm 1056 2380
Height b mm 2380 1056
Depth mm 72 72
Optical efficiency*2% 74.3 74.3
Heat loss coefficient k1*2W/(m2·K) 4.16 4.16
Heat loss coefficient k2*2W/(m2·K
2) 0.0124 0.0124
Thermal capacity kJ/(m2·K) 6.4 6.4
Weight kg 43 43
Liquid content
(heat transfer medium)
litre 1.67 2.33
Permissible operating pressure*3bar 6 6
Max. idle temperature*4°C 221 221
Connection Ømm 22 22
Requirements of base structure and fixings Roof construction with sufficient load-bearing capacity for
the prevailing wind forces
Type SV1
KR Collector return (inlet)
KV Collector flow (outlet)
5822 407 GB
VITOSOL 100-F VIESMANN 3
*1
Decisive when sizing the system.
*2
Relative to the absorber surface area.
*3
In a cold, sealed system, the collectors must be pressurised to at least 1.0 bar.
*4
The idle temperature is the temperature that occurs at the hottest part of the collector when no heat is drawn off (at 1000 W global
radiation).
Specification

Type SH1
KR Collector return (inlet)
KV Collector flow (outlet)
Delivered condition
The Vitosol 100-F is delivered fully assembled and fully wired.
Accessories
Packed separately, subject to order:
&The fixing set with product documentation contains the compo-
nents required for the relevant method of installation:
–Timber
–Roof hooks
–Mounting plates
–Mounting rails
–Connecting elements for mounting rails
–Clamping brackets, screws, nuts
&Connecting pipes
&Connection set
&Sensor well set
&Spare parts set (assortment of small parts that may be lost dur-
ing the collector installation)
&Solar-Divicon
(pump station for the collector circuit)
&Solar pump line
(for a second pump circuit)
&Connection line, 24 m long
&Installation set for connection line to the DHW cylinder
&Air separator
&Quick-acting air vent valve with tee and locking ring fitting
&Lockingringfitting
(with or without air vent valve)
&Connection lines, 1.0 m long, 2 pce.
&Solar flow and return line, 6 or 12 m long
&Fill valve
&Filling station
&Manual solar fill pump
&Solar expansion vessel with shut-off valve
&Pre-cooling vessel
&Frost protection gauge
&Heat transfer medium
Non-toxic liquid for solar heating systems with active anti-corro-
sion and anti-ageing protection.
&Solar service case
Specification, heat transfer medium
Frost protection: down to -28 °C
Density at 20 °C: 1.032 to 1.035 g/cm3
to ASTM D 1122
Viscosityat20°C: 4.5upto5.5mm
2/s
to DIN 51562
pH value: 9.0 to 10.5
to ASTM D 1287
Colour: clear, violet fluorescent
Container: 25 or 200 litre in a non-return-
able container
Tested quality
The collector meets the requirements of the "Blue Angel" certifi-
cate of environmental excellence to RAL UZ 73.
Tested in accordance with Solar KEYMARK.
CE designation according to current EC Directives.
5822 407 GB
4VIESMANN VITOSOL 100-F
Specification (cont.)

5822 407 GB
VITOSOL 100-F VIESMANN 5

Viessmann Werke GmbH&Co KG
D-35107 Allendorf
Telephone: [phone]
Fax: [phone]
www.viessmann.com
Subject to technical modifications.
Viessmann Limited
Hortonwood 30, Telford
Shropshire, TF1 7YP, GB
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
5822 407 GB Printed on environmentally friendly,
chlorine-free bleached paper
6VIESMANN VITOSOL 100-F