ViewSonic PJD5133 User manual
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://www.
YLHZVRQLFFRPLQ(QJOLVKRULQVSHFL¿FODQJXDJHVXVLQJWKH5HJLRQDOVHOHFWLRQER[LQ
the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente
las instrucciones en este manual”
PJD5133/PJD5233/PJD5523w
DLP Projector
User Guide
i
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD
,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU
&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWRZKLFKWKH
receiver is connected.
&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
Warning: <RXDUHFDXWLRQHGWKDWFKDQJHVRUPRGL¿FDWLRQVQRWH[SUHVVO\DSSURYHGE\
the party responsible for compliance could void your authority to operate the equipment.
For Canada
7KLV&ODVV%GLJLWDODSSDUDWXVFRPSOLHVZLWK&DQDGLDQ,&(6
&HWDSSDUHLOQXPpULTXHGHODFODVVH%HVWFRQIRUPHjODQRUPH10%GX
Canada.
CE Conformity for European Countries
7KHGHYLFHFRPSOLHVZLWKWKH(0&'LUHFWLYH(&DQG/RZ9ROWDJH'LUHFWLYH
(&
Following information is only for EU-member states:
7KHPDUNLVLQFRPSOLDQFHZLWKWKH:DVWH(OHFWULFDODQG(OHFWURQLF(TXLSPHQW
'LUHFWLYH(&:(((
7KHPDUNLQGLFDWHVWKHUHTXLUHPHQW127WRGLVSRVHWKHHTXLSPHQWLQFOXGLQJDQ\
spent or discarded batteries or accumulators as unsorted municipal waste, but use
the return and collection systems available.
If the batteries, accumulators and button cells included with this equipment,
display the chemical symbol Hg, Cd, or Pb, then it means that the battery has
DKHDY\PHWDOFRQWHQWRIPRUHWKDQ0HUFXU\RUPRUHWKDQ
&DGPLXPRUPRUHWKDQ/HDG
ii
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
+HHGDOOZDUQLQJV
)ROORZDOOLQVWUXFWLRQV
'RQRWXVHWKLVXQLWQHDUZDWHU
&OHDQZLWKDVRIWGU\FORWK
7.
'RQRWEORFNDQ\YHQWLODWLRQRSHQLQJV,QVWDOOWKHXQLWLQDFFRUGDQFHZLWK
the manufacturer’s instructions.
'RQRWLQVWDOOQHDUDQ\KHDWVRXUFHVVXFKDVUDGLDWRUVKHDWUHJLVWHUV
VWRYHVRURWKHUGHYLFHVLQFOXGLQJDPSOL¿HUVWKDWSURGXFHKHDW
'RQRWGHIHDWWKHVDIHW\SXUSRVHRIWKHSRODUL]HGRUJURXQGLQJW\SH
SOXJ$SRODUL]HGSOXJKDVWZREODGHVZLWKRQHZLGHUWKDQWKHRWKHU
A grounding type plug has two blades and a third grounding prong.
The wide blade and the third prong are provided for your safety. If the
SURYLGHGSOXJGRHVQRW¿WLQWR\RXURXWOHWFRQVXOWDQHOHFWULFLDQIRU
replacement of the obsolete outlet.
3URWHFWWKHSRZHUFRUGIURPEHLQJZDONHGRQRUSLQFKHGSDUWLFXODUO\DW
SOXJV&RQYHQLHQFHUHFHSWDFOHVDQGWKHSRLQWZKHUHWKH\H[LWIURPWKH
unit. Be sure that the power outlet is located near the unit so that it is
easily accessible.
2QO\XVHDWWDFKPHQWVDFFHVVRULHVVSHFL¿HGE\WKHPDQXIDFWXUHU
8VHRQO\ZLWKWKHFDUWVWDQGWULSRGEUDFNHWRUWDEOHVSHFL¿HG
by the manufacturer, or sold with the unit. When a cart is used,
XVHFDXWLRQZKHQPRYLQJWKHFDUWXQLWFRPELQDWLRQWRDYRLG
injury from tipping over.
8QSOXJWKLVXQLWZKHQXQXVHGIRUORQJSHULRGVRIWLPH
5HIHUDOOVHUYLFLQJWRTXDOL¿HGVHUYLFHSHUVRQQHO6HUYLFLQJLVUHTXLUHG
ZKHQWKHXQLWKDVEHHQGDPDJHGLQDQ\ZD\VXFKDVLIWKHSRZHUVXSSO\
cord or plug is damaged, if liquid is spilled onto or objects fall into the
XQLWLIWKHXQLWLVH[SRVHGWRUDLQRUPRLVWXUHRULIWKHXQLWGRHVQRW
operate normally or has been dropped.
Declaration of RoHS Compliance
7KLVSURGXFWKDVEHHQGHVLJQHGDQGPDQXIDFWXUHGLQFRPSOLDQFHZLWK'LUHFWLYH
(&RIWKH(XURSHDQ3DUOLDPHQWDQGWKH&RXQFLORQUHVWULFWLRQRIWKHXVHRIFHUWDLQ
KD]DUGRXVVXEVWDQFHVLQHOHFWULFDODQGHOHFWURQLFHTXLSPHQW5R+6'LUHFWLYHDQGLV
GHHPHGWRFRPSO\ZLWKWKHPD[LPXPFRQFHQWUDWLRQYDOXHVLVVXHGE\WKH(XURSHDQ
Technical Adaptation Committee (TAC) as shown below:
Substance
Proposed
Maximum
Concentration
Actual Concentration
/HDG3E
0HUFXU\+J
Cadmium (Cd)
+H[DYDOHQW&KURPLXP&U)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers
3%'(
&HUWDLQFRPSRQHQWVRISURGXFWVDVVWDWHGDERYHDUHH[HPSWHGXQGHUWKH$QQH[RIWKH
5R+6'LUHFWLYHVDVQRWHGEHORZ
([DPSOHVRIH[HPSWHGFRPSRQHQWVDUH
0HUFXU\LQFRPSDFWÀXRUHVFHQWODPSVQRWH[FHHGLQJPJSHUODPSDQGLQRWKHU
ODPSVQRWVSHFL¿FDOO\PHQWLRQHGLQWKH$QQH[RI5R+6'LUHFWLYH
/HDGLQJODVVRIFDWKRGHUD\WXEHVHOHFWURQLFFRPSRQHQWVÀXRUHVFHQWWXEHVDQG
HOHFWURQLFFHUDPLFSDUWVHJSLH]RHOHFWURQLFGHYLFHV
/HDGLQKLJKWHPSHUDWXUHW\SHVROGHUVLHOHDGEDVHGDOOR\VFRQWDLQLQJE\ZHLJKW
or more lead).
/HDGDVDQDOORWWLQJHOHPHQWLQVWHHOFRQWDLQLQJXSWROHDGE\ZHLJKWDOXPLQLXP
FRQWDLQLQJXSWROHDGE\ZHLJKWDQGDVDFRRSHUDOOR\FRQWDLQLQJXSWROHDGE\
weight.
1
Copyright Information
Copyright©9LHZ6RQLF®&RUSRUDWLRQ$OOULJKWVUHVHUYHG
0DFLQWRVKDQG3RZHU0DFLQWRVKDUHUHJLVWHUHGWUDGHPDUNVRI$SSOH,QF
0LFURVRIW:LQGRZV:LQGRZV17DQGWKH:LQGRZVORJRDUHUHJLVWHUHGWUDGHPDUNVRI
0LFURVRIW&RUSRUDWLRQLQWKH8QLWHG6WDWHVDQGRWKHUFRXQWULHV
9LHZ6RQLFWKHWKUHHELUGVORJR2Q9LHZ9LHZ0DWFKDQG9LHZ0HWHUDUHUHJLVWHUHG
WUDGHPDUNVRI9LHZ6RQLF&RUSRUDWLRQ
9(6$LVDUHJLVWHUHGWUDGHPDUNRIWKH9LGHR(OHFWURQLFV6WDQGDUGV$VVRFLDWLRQ'306DQG
''&DUHWUDGHPDUNVRI9(6$
36 9*$DQG;*$DUHUHJLVWHUHGWUDGHPDUNVRI,QWHUQDWLRQDO%XVLQHVV0DFKLQHV
Corporation.
'LVFODLPHU9LHZ6RQLF&RUSRUDWLRQVKDOOQRWEHOLDEOHIRUWHFKQLFDORUHGLWRULDOHUURUVRU
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
,QWKHLQWHUHVWRIFRQWLQXLQJSURGXFWLPSURYHPHQW9LHZ6RQLF&RUSRUDWLRQUHVHUYHVWKH
ULJKWWRFKDQJHSURGXFWVSHFL¿FDWLRQVZLWKRXWQRWLFH,QIRUPDWLRQLQWKLVGRFXPHQWPD\
change without notice.
1RSDUWRIWKLVGRFXPHQWPD\EHFRSLHGUHSURGXFHGRUWUDQVPLWWHGE\DQ\PHDQVIRUDQ\
SXUSRVHZLWKRXWSULRUZULWWHQSHUPLVVLRQIURP9LHZ6RQLF&RUSRUDWLRQ
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com. The
9LHZ6RQLF
®
:L]DUG&'520DOVRSURYLGHVDQRSSRUWXQLW\IRU\RXWRSULQWWKHUHJLVWUDWLRQ
IRUPZKLFK\RXPD\PDLORUID[WR9LHZ6RQLF
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
PJD5133/PJD5233/PJD5523w
ViewSonic DLP Projector
VS14112(PJD5133)/VS14114(PJD5233)/VS13870(PJD5523w)
PJD5133/PJD5233/PJD5523w_UG_ENG Rev. 1A 03-15-11
_______________________________
_______________________________
Product disposal at end of product life
The lamp in this product contains mercury which can be dangerous to you and the
environment. Please use care and dispose of in accordance with local, state or federal laws.
9LHZ6RQLFUHVSHFWVWKHHQYLURQPHQWDQGLVFRPPLWWHGWRZRUNLQJDQGOLYLQJJUHHQ7KDQN
\RXIRUEHLQJSDUWRI6PDUWHU*UHHQHU&RPSXWLQJ3OHDVHYLVLW9LHZ6RQLFZHEVLWHWROHDUQ
more.
86$&DQDGDKWWSZZZYLHZVRQLFFRPFRPSDQ\JUHHQUHF\FOHSURJUDP
(XURSHKWWSZZZYLHZVRQLFHXURSHFRPXNVXSSRUWUHF\FOLQJLQIRUPDWLRQ
7DLZDQKWWSUHF\FOHHSDJRYWZUHF\FOHLQGH[DVS[
2
Notes on the AC Power Cord
AC Power Cord must meet the requirement of countries where you use this projector.
Please confirm your AC plug type with the graphics below and ensure that the proper
AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet,
please contact your sales dealer. This projector is equipped with a grounding type AC
line plug. Please ensure that your outlet fits the plug. Do not defeat the safety purpose
of this grounding type plug. We highly recommend using a video source device also
equipped with a grounding type AC line plug to prevent signal interference due to
voltage fluctuations.
Ground
3
CONTENTS
Introduction ........................................................................ 5
Projector Features .......................................................................................................5
Package Contents .......................................................................................................6
Projector Overview ......................................................................................................7
Using the Product .............................................................. 9
Control Panel ..............................................................................................................9
Connection Ports .......................................................................................................10
Remote Control .........................................................................................................11
Installing the Batteries ...............................................................................................13
Remote Control Operation ........................................................................................14
Connection ....................................................................... 15
Connecting a computer or monitor ............................................................................16
Connecting Video source devices .............................................................................17
Operation .......................................................................... 20
Powering On/Off the Projector ..................................................................................20
Adjusting the Projector Height ...................................................................................21
Adjusting the Projector Zoom and Focus .................................................................. 21
Adjusting Projection Image Size ...............................................................................22
Locking control keys ..................................................................................................24
Setting the presentation timer ...................................................................................25
Menu Operation ........................................................................................................26
Maintenance ..................................................................... 33
Cleaning the Lens .....................................................................................................33
Cleaning the Projector Housing ................................................................................33
Replacing the Lamp ..................................................................................................34
Specifications ................................................................... 36
Dimensions ...............................................................................................................37
Ceiling mount installation ..........................................................................................37
Appendix ........................................................................... 38
LED Indicator Messages!..........................................................................................38
Compatibility Modes ..................................................................................................39
Troubleshooting ........................................................................................................41
RS-232 Command and Configuration!......................................................................42
IR Control Code ........................................................................................................ 45
4
Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user - friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
SVGA (800 x 600 pixels)
XGA (1024 x 768 pixels)
WXGA (1280 x 800 pixels)
Compatibility with Macintosh® computers
Compatibility with NTSC, PAL, SECAM and HDTV
D-Sub 15-pin terminal for analog video connectivity
User-friendly, multi-language on-screen display
Advanced electronic keystone correction
RS-232 connector for serial control
Less than 1 W power consumption in standby mode
HDMI compatibility
The information in this manual is subject to change without notices.
The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
5
Package Contents
When you unpack the projector, make sure you have all these components:
Projector AC Power Cord Remote Control (IR) & batteries
(AAA *2 PCS)
VGA Cable (D-SUB to D-
SUB)
ViewSonic CD Wizard Quick Start Guide
Contact you dealer immediately if any items are missing, appear damaged, or if
the unit does not work
.
Save the original shipping carton and Packing material; they will come-in
handy if you ever to ship your unit. for maximum protection, repack your unit as
it was originally packed at the factory.
6
Projector Overview
Front View
Front IR remote control sensor Control panel
Elevator foot Zoom ring
Projection lens Focus ring
Speaker Lamp cover
Ventilation holes
32
1
5
4
6
78
9
16
2 7
38
4 9
5
7
Rear View
Connection ports
AC power socket
Kensington lock
Bottom View
Security bar
Ceiling mount holes
Ventilation holes
13
2
1
2
23
1
2
3
3
1
22
3
This projector can be used with a ceiling mount for support. The ceiling mount is
not included in the package.
Contact your dealer for information to mount the projector on a ceiling.
8
Using the Product
Control Panel
Power
Turn the projector on or off.
SOURCE
Display the source selection bar.
MENU/EXIT
Display or exit the on-screen display menus.
Keystone/Arrow keys ( /Up, /Down)
Manually correct distorted images resulting from an angled projection.
Four directional buttons
Use four directional buttons to select items or make adjustments to your
selection.
MODE
Change the color mode setting by sequence.
POWER (Power LED indicator)
Refer to “LED Indicator Messages”.
TEMP/LAMP (Temp/Lamp LED indicator)
Refer to “LED Indicator Messages”.
TEMP/LAMP
POWER
M
O
D
E
S
O
U
R
C
E
MENU/
EXIT
1 42
4
6
5
7
8
3
1
2
3
4
5
6
7
8
9
Connection Ports
AUDIO IN
Connect an audio output from video equipment or computer to this jack.
HDMI
Connect HDMI output from video equipment to this jack.
S-VIDEO
Connect S-Video output from video equipment to this jack.
COMPUTER IN 1
Connect image input signal (analog RGB or component) to this jack.
RS-232
When operating the projector via a computer, connect this to the controlling
computer's RS-232C port.
MINI USB
This connector is for firmware update and mouse function support.
COMPUTER OUT
Connect to a computer display, etc.
COMPUTER IN 2
Connect image input signal (analog RGB or component) to this jack.
VIDEO
Connect composite video output from video equipment to this jack.
AUDIO OUT
Connect to a speaker or other audio input equipment.
7
10
13456
89
2
1
2
3
4
5
6
7
8
9
10
10
Remote Control
Power
Turn the projector on or off.
VGA1
Display COMPUTER IN 1 signal.
Menu/ Left mouse
Display on-screen display menus.
Perform the left button of the
mouse when mouse mode is
activated.
Mouse/Right mouse
Switch between the normal and
mouse modes.
Perform the right button of the
mouse when mouse mode is
activated.
Keystone/Arrow keys ( /Up,
/Down)
Manually correct distorted images
resulting from an angled
projection.
Left
When the On-Screen Display
(OSD) menu is activated, the #5,
#6, and #19 keys are used as
directional arrows to select the
desired menu items and to make
adjustments.
Timer
Activate P-Timer OSD menu.
My Button
User definable key for customized
function.
Pattern
Display embedded test pattern.
Freeze
Freeze the projected image.
Color Mode
Select the picture setup mode.
Blank
Hide the screen picture.
Source
Display the source selection bar.
Auto
Automatically determines the best
picture timings for the displayed image.
1
2
3
4
5
6
7
8
9
10
4
6
5
7
9
11
15
16
18
19
20
21
22
23
12
10
17
3
5
8
13
14
11
12
13
14
11
Video/Page Up
Switch input source to Composite/
S-Video/HDMI by sequence.
Perform page up function when
mouse mode is activated.
VGA2
Display COMPUTER IN 2 signal.
ESC/Page Down
Goes back to previous OSD menu.
Perform page down function when
mouse mode is activated.
Enter
Confirmed selections.
Right/ Lock
Activate panel key lock.
Magnify
Magnifies or reduces the projected
picture size.
Volume
Adjust the volume level.
Mute
Cut off the sound temporarily.
Aspect
Select the display aspect ratio.
Using the remote mouse control
The capability of operating your computer
with the remote control gives you more
flexibility when delivering presentations.
1. Connect the projector to your PC or
notebook with a USB cable prior to
using the remote control in place of
your computer’s mouse. See
“Connecting a computer” on page 16
for details.
2. Set the input signal to
COMPUTER IN
1
or
COMPUTER IN 2
.
3. Press
Mouse
on the remote control to
switch from the normal mode to the
mouse mode. An icon appears on the
screen to indicate the activation of the
mouse mode.
4. Perform the desired mouse controls on
your remote control.
To move the cursor on the screen,
press / / / .
To left-click, press .
To right-click, press .
To drag-and-drop, press and hold
Enter, press / / / to
drag. When it is where you want it,
press Enter again.
To operate your display software
program (on a connected PC)
which responds to page up/down
commands (like Microsoft
PowerPoint), press Page Up/Page
Down.
To return to the normal mode,
press Mouse again or other keys
except for the mouse related multi-
function keys.
15
16
17
18
19
20
21
22
23
12
Installing the Batteries
1. Open the battery cover in the
direction shown.
2. Install batteries as indicated by the
diagram inside the compartment.
3. Close the battery cover into
position.
Caution
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Make sure the plus and minus terminals are correctly aligned when loading a battery.
Keep the batteries out of the reach of children. There is a danger of death by
accidentally swallowing the batteries.
Remove batteries from remote control when not using for extended periods.
Do not dispose of the used batteries along with household waste. Dispose of used
batteries according to local regulations.
Danger of explosion may happen if batteries are incorrectly replaced. Replce all
the batteries with new ones.
Batteries should not be in or near to fire or water, keep batteries in a dark, cool
and dry place.
If suspect battery leakage, wipe out the leakage and then replace new batteries.
If the leakage adheres to your body or clothes, rinse well with water immediately.
13
Remote Control Operation
Point the remote control at the infrared remote sensor and press a button.
Operating the projector from
the front
7m
5m
15 15
8m
The remote control may not operate when there is sunlight or other strong
light such as a fluorescent lamp shining on the remote sensor.
Operate the remote control from a position where the remote sensor is visible.
Do not drop the remote control or jolt it.
Keep the remote control out of locations with excessively high temperature or
humidity.
Do not get water on the remote control or place wet objects on it.
Do not disassemble the remote control.
14
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
Important
In the connections shown above, some cables may not be included with the
projector (see “Package Contents” on page 6). They are commercially
available from electronics stores.
The connection illustrations above are for reference only. The rear
connecting jacks available on the projector vary with each projector model.
For detailed connection methods, see pages 16-19.
Audio cable VGA (D-Sub) to HDTV (RCA) cable
HDMI cable VGA cable (D-Sub to D-Sub)
Composite Video cable USB cable
S-Video cable VGA to DVI-A cable
23 4 5
16 7 68
1 1
1 5
2 6
37
48
15
Connecting a computer or monitor
Connecting a computer
The projector provides two VGA input sockets that allow you to connect them to both!
IBM®compatibles and Macintosh®computers. A Mac adapter is needed if you are!
connecting legacy version Macintosh computers.
To connect the projector to a notebook or desktop computer:
1. Take the supplied VGA cable and connect one end to the D-Sub output socket of
the computer.
2. Connect the other end of the VGA cable to the COMPUTER IN 1 or COMPUTER
IN 2 signal input socket on the projector.
Important
Many notebooks do not turn on their external video ports when connected to
a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the
external display on/off. Locate a function key labeled CRT/LCD or a function
key with a monitor symbol on the notebook. Press FN and the labeled
function key simultaneously. Refer to your notebook's documentation to find
your notebook's key combination.
Connecting a monitor
If you want to view your presentation close-up on a monitor as well as on the screen,
you can connect the COMPUTER OUT signal output socket on the projector to an
external monitor with a VGA cable following the instructions below:
To connect the projector to a monitor:
1. Connect the projector to a computer as described in “Connecting a computer” on
page 16.
2. Take a suitable VGA cable (only one supplied) and connect one end of the cable
to the!D-Sub input socket of the video monitor.
Or if your monitor is equipped with a DVI input socket, take a VGA to DVI-A cable
and connect the DVI end of the cable to the DVI input socket of the video monitor.
3. Connect the other end of the cable to the COMPUTER OUT socket on the
projector.
Important
The COMPUTER OUT output only works when COMPUTER IN 1 or
COMPUTER IN 2 is made to the projector.
16
Connecting Video source devices
You can connect your projector to various Video source devices that provide any one
of the following output sockets:
HDMI
Component Video
S-Video
Video (composite)
You need only connect the projector to a Video source device using just one of the
above!connecting methods, however each provides a different level of video quality.
The method!you choose will most likely depend upon the availability of matching
terminals on both the!projector and the Video source device as described below:
Connecting an HDMI source device
Examine your Video source device to determine if it has a set of unused HDMI output
jacks available:
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to the
device.
To connect the projector to an HDMI source device:
1. Take an HDMI cable and connect one end to the HDMI output jack of the HDMI
source device.
2. Connect the other end of the HDMI cable to the HDMI jack on the projector.
Terminal name Terminal appearance Reference Picture quality
HDMI
HDMI “Connecting an HDMI
source device” on
page 17 Best
Component Video
COMPUTER “Connecting a
Component Video
source device” on
page 18
Better
S-Video
S-VIDEO “Connecting an S-
Video source device”
on page 18 Good
Video
VIDEO “Connecting a
composite Video
source device” on
page 19
Normal
17
Other manuals for PJD5133
1
This manual suits for next models
5
Table of contents
Other ViewSonic Projector manuals
ViewSonic
ViewSonic PX704HDE User manual
ViewSonic
ViewSonic PJD5152 User manual
ViewSonic
ViewSonic VS17337 User manual
ViewSonic
ViewSonic PJ402D-2 User manual
ViewSonic
ViewSonic PX727HD User manual
ViewSonic
ViewSonic PJ250 - XGA DLP Projector User manual
ViewSonic
ViewSonic PJ755D User manual
ViewSonic
ViewSonic M1 VS17337 User manual
ViewSonic
ViewSonic PJ758 User manual
ViewSonic
ViewSonic PJ503D - DLP Projector User manual
ViewSonic
ViewSonic PJ750 User manual
ViewSonic
ViewSonic X Series User manual
ViewSonic
ViewSonic VS11664 User manual
ViewSonic
ViewSonic Pro9000 User manual
ViewSonic
ViewSonic PJD7223 User manual
ViewSonic
ViewSonic VS10872 Quick start guide
ViewSonic
ViewSonic PLED-W500 User manual
ViewSonic
ViewSonic ViewDock PJ258D User manual
ViewSonic
ViewSonic PJD6240 - XGA DLP Projector User manual
ViewSonic
ViewSonic PJD8333s User manual
