IMPORTANT–Please Read and Follow!
2 3
•Be ore beginning, please read these instructions completely and care ully.
•Use caution during assembly to minimize scratches.
•Do not remove permanently a ixed labels, warnings or plates rom the product. This may
void the warranty.
•Please re er to the DFRB5 or DFFB5 Installation Instructions or more in ormation on
installing the re rigerator/ reezer door panel.
•The installer should leave instructions with the customer who should retain for local
inspector s use and future reference.
Parts Included
Part Quantity
Professional Series Handle T be
Professional Series End Caps
1/4” x 1” Phillips Head Screws
Installation Instr ctions
Required Tools
Electric Drill
5/16” (.8 cm) Drill Bit
5/8” (1.6 cm) Spade or Forstner Bit (Counterbore)
Tape Measure
Phillips Head Screwdriver
Masking Tape and Pencil
Rubber Mallet
Handle Installation
To Install:
Installation with Wooden Full Overlay
Custom Door Front
(1)
(2)
(4)
1. Locate the wooden custom panel.
2. Using the illustrations on the next page, layout the handle location on the panels. It is
recommended that masking tape be placed where the our holes will be drilled to help mark
the hole placement and to prevent any damage to the door when drilling the holes.
3. The Pro essional handle will be mounted using (4) o the 1/4” x 1” Phillips head screws
provided. Using the 5/16”(.8 cm) drill bit, drill completely through the door in the hole
locations. Using the 5/8” (1.6 cm) bit, counter-bore two holes 1/4” (.6 cm) deep on the
BACKSIDE o the custom door panel.
4. Place a handle end cap on both ends o the handle tube. Tap the endcaps irmly into place
with a rubber mallet ensuring that both endcaps mounting sur aces are parallel.
5. Align the holes in the endcaps with the holes on the panel and attach the Pro essional
handle to the panel using the (4) 1/4” (.6cm) screws provided.
Custom Door
DFRB All Refrigerator/DFFB All Freezer
(Front View)
Professional Series Handle
Speci ications subject to change without notice.
