Vintage Air 1955-57 User manual

an ISO 9001:2015 Registered Company
1955-57 Chevrolet V8
18” Fan Shroud
(37155-VCF)
18865 Goll St. San Antonio, TX 78266
Phone: [phone]
Sales: [email protected]
Tech Support: [email protected]
www.vintageair.com
907155 REV B 09/27/21, PG 1 OF 7

2
www.vintageair.com
907155 REV B 09/27/21, PG 2 OF 7
Cover..................................................................................................................................
Table of Contents.................................................................................................................
Packing List/Parts Disclaimer..................................................................................................
Core Support Measurements..................................................................................................
Important Information, Engine Compartment Disassembly.........................................................
Fan Shroud Installation.........................................................................................................
Packing List.........................................................................................................................
1
2
3
4
5
6
7
Table of Contents

3
www.vintageair.com
907155 REV B 09/27/21, PG 3 OF 7
Packing List:
Fan Shroud Kit (37155-VCF)
No.
1.
2.
3.
4.
Qty.
4
4
1
1
Part No.
18250-VUB
18123-VUB
32802-VCF
328030
Description
Screw, 10-32 x 1/2”, Pan Head
Washer, 3/16” x 1/2”, SAE Flat
Shroud, Fan, Top
Shroud, Fan, Bottom
** Before beginning installation, open all packages and check contents of shipment.
Please report any shortages directly to Vintage Air within 15 days. After 15 days,
Vintage Air will not be responsible for missing or damaged items.
3
1
4
2
NOTE: Images may not depict actual parts and quantities.
Refer to packing list for actual parts and quantities.

4
www.vintageair.com
907155 REV B 09/27/21, PG 4 OF 7
Fan Shroud Measurements
24 ½”
20”
21”
4 ¾”
3 ¾”

5
www.vintageair.com
907155 REV B 09/27/21, PG 5 OF 7
Engine Compartment Disassembly
1.
2. Top radiator hose. Radiator top and bottom support bolts (See Figure 1, below). NOTE: Do not remove the center bolt, this
will hold the radiator and condenser in alignment.
Remove the Following:
Important Information
Figure 1
• The Vintage Air fan shroud is designed for an 18” heavy duty fan (#32918-VUF).
• With power steering, it may be necessary to space the fan forward 3/8”.
A spacer kit (#32155-VCF) is available from Vintage Air.
I
Top Radiator
Hose
Radiator
Remove Top and
Bottom OEM
Radiator Bolts

6
www.vintageair.com
907155 REV B 09/27/21, PG 6 OF 7
Fan Shroud Installation
1.
2.
3.
4.
5.
Insert the bottom half of the fan shroud (See Figure 1, below).
Install the top half of the fan shroud to the radiator using (4) OEM radiator support bolts (See Figure 2,
below).
If applicable, check for clearance at the power steering pump drive pulley. Trim for clearance if necessary.
Secure the bottom half of the fan shroud with (4) 10-32 x 1/2” screws and (4) 3/16” x 1/2” SAE at washers.
(See Figure 3, below).
Reinstall the radiator top hose.
FIGURE 2
3
Figure 1
Figure 2
Figure 3
Transmission
Line
Transmission
Line
Radiator Bottom
Hose
OEM
Bolts
OEM
Bolts
(4) 10-32 x 1/2”
Pan Head Screws
(4) 3/16” x 1/2”
SAE Flat Washers

7
www.vintageair.com
907155 REV B 09/27/21, PG 7 OF 7
No.
1.
2.
3.
4.
Qty.
4
4
1
1
Part No.
18250-VUB
18123-VUB
32802-VCF
328030
Description
Screw, 10-32 x 1/2”, Pan Head
Washer, 3/16” x 1/2”, SAE Flat
Shroud, Fan, Top
Shroud, Fan, Bottom
NOTE: Images may not depict actual parts and quantities.
Refer to packing list for actual parts and quantities.
Checked By:
Packed By:
Date:
3
1
4
2
Packing List:
Fan Shroud Kit (37155-VCF)