Vintage Air Steel-eez 15827-SCA User manual

18865 Goll St. San Antonio, TX 78266
Phone: [phone]
Fax: [phone]
www.vintageair.com
903375 REV C 03/05/15, PG 1 OF 6
INSTALLATION INSTRUCTIONS
SMALL BLOCK CHEVY
SHORT PUMP
DRIVER SIDE
w/ HEADERS
ALTERNATOR BRACKET
(15827-SCA)

2903375 REV C 03/05/15, PG 2 OF 6
www.vintageair.com
TM
Bracket Systems
-
Table of Contents
PAGES
1.
2.
3.
4.
5.
6.
COVER
TABLE OF CONTENTS
PACKING LIST
ALTERNATOR MOUNTING BRACKET INSTALLATION
INSTALLATION DIAGRAM
PACKING LIST

3903375 REV C 03/05/15, PG 3 OF 6
www.vintageair.com
TM
Bracket Systems
-
** BEFORE BEGINNING INSTALLATION, OPEN ALL PACKAGES AND CHECK CONTENTS OF SHIPMENT.
PLEASE REPORT ANY SHORTAGES DIRECTLY TO VINTAGE AIR WITHIN 15 DAYS. AFTER 15 DAYS,
VINTAGE AIR WILL NOT BE RESPONSIBLE FOR MISSING OR DAMAGED ITEMS.
(15827-SCA) PACKING LIST
No. QTY. PART No. DESCRIPTION
1.
2.
3.
4.
1
1
1
1
REAR MOUNTING BRKT w/ HEADERS
FRONT MOUNTING BRKT
ALTERNATOR MOUNTING BRKT
HARDWARE KIT
SMALL BLOCK CHEVY S/P ALTERNATOR BRACKET
12
34
14610-SCR
14619-SCA
14611-SCR
19105-HCA
DRIVER’S SIDE WITH HEADERS

4903375 REV C 03/05/15, PG 4 OF 6
www.vintageair.com
TM
Bracket Systems
-
INSTALLA
TION INSTRUCTIONS
FIGURE 1
2. REMOVE 1ST AND 3RD HEADER BOLTS ON DRIVER SIDE (DISCARD).
1. REMOVE THE TOP WATER PUMP MOUNTING BOLT (DRIVER SIDE) (DISCARD). SEE FIGURE 1, BELOW.
4. ATTACH ALTERNATOR REAR MOUNTING BRACKET TO HEADER USING (2) 3/8” x 1 ¼” BOLTS
(SEE FIGURE 2, PAGE 5).
* 3/8” FLANGE HEADERS DO NOT REQUIRE SPACERS.
* 1/4” FLANGE HEADERS REQUIRE (2) 1/8” SPACERS BETWEEN BRACKET AND HEADER
(SEE FIGURE 3, PAGE 5).
3. ATTACH ALTERNATOR FRONT MOUNTING BRACKET TO WATER PUMP USING 3/8” x 4” BOLT,
LOCK WASHER AND 2” SPACER (SEE FIGURE 2, PAGE 5).
SEE FIGURE 1, BELOW.
REMOVE
BOLTS
ALTERNATOR MOUNTING BRACKET INSTALLATION
NOTE: BEFORE TIGHTENING BOLTS, ASSEMBLE ALL BRACKETS LOOSELY TO
ENGINE. THIS WILL ENSURE PROPER ALIGNMENT OF ALL BRACKETS.
NOTE: HEADER SPACERS.

5903375 REV C 03/05/15, PG 5 OF 6
www.vintageair.com
TM
Bracket Systems
-
FIGURE 2
FIGURE 3
NOTE: BEFORE TIGHTENING BOLTS, ASSEMBLE ALL BRACKETS LOOSELY TO ENGINE. THIS WILL ENSURE PROPER ALIGNMENT OF ALL BRACKETS.
ALTERNATOR MOUNTING
BRACKET
14611-SCR
1/4” SPACER
5/16” x 1” BOLT
2” SPACER
3/8” x 3 ¼” BOLT
3/8” x 4” BOLT
w/ LOCK WASHER
3/8” x 1” BOLT
w/ LOCK WASHER
w/ FLAT WASHER
UPPER
ALTERNATOR
TAB
LOWER
ALTERNATOR
TAB
1/8” SPACERS (BETWEEN BRACKET & HEADER)
3/8” x 1 ¼”
6-POINT BOLT
3/8”
LOCKNUT
FRONT MOUNTING
BRACKET
14610-SCR
WE RECOMMED A BELT LENGTH OF 58 TO 59 INCHES. HOWEVER, THIS CAN VARY WITH THE DIAMETER OF YOUR WATER PUMP & CRANKSHAFT PULLEY.
REAR MOUNTING
BRACKET
14619-SCA
REAR MOUNTING
BRACKET
14619-SCA
FRONT
ALTERNATOR
PULLEY
WATER PUMP
PULLEY
CRANKSHAFT
PULLEY CRANKSHAFT PULLEY GROOVES:
1. CRANKSHAFT, WATER PUMP & ALTERNATOR
12

6903375 REV C 03/05/15, PG 6 OF 6
www.vintageair.com
TM
Bracket Systems
-
12
34
CHECKED BY:
PACKED BY:
DATE:
(15827-SCA) PACKING LIST
No. QTY. PART No. DESCRIPTION
1.
2.
3.
4.
1
1
1
1
REAR MOUNTING BRKT w/ HEADERS
FRONT MOUNTING BRKT
ALTERNATOR MOUNTING BRKT
HARDWARE KIT
SMALL BLOCK CHEVY S/P ALTERNATOR BRACKET
14610-SCR
14619-SCA
14611-SCR
19105-HCA
DRIVER’S SIDE WITH HEADERS