VISIONARY DESIGNS MOD-1224 Manual

© 2018
Order #XXXXX
Completed Assembly
Insert
1
2
3
4Counter Top
Shelf
5A
5
6A
6
5
5A
5
5
Plan View
1
23
4
6
55
Side assemblies
stay assembled.
*
Extrusion [5] has a lip
for the shelf to rest upon.
Lip
Extrusion Lip
*
*
Item
1
2
3
4
5/5A
6/6A
Qty
1
1
1
1
4/2
1/1
Description
37.5”h Vertical Extrusion
37.5”h Corner Extrusion
37.5”h Corner Extrusion
37.5”h Vertical Extrusion
11”w Horizontal Extrusion
24.875”w Horizontal Extrusion
Steps
1) Attach horizontal extrusions [5] and [5A] between
extrusions [1 and 2] [3 and 4].
2) Attach curved horizontal extrusions [6] and [6A]
between extrusions [2] and [3], with Insert between.
3) Place shelf onto lips of extrusions [5A].
See Extrusion Lip detail.
4) Set counter top on top of assembled base.
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at [email protected]
MOD-1224 Pedestal

© 2018
Order #XXXXX
DO NOT USE POWER TOOLS
ALL CONNECTIONS MUST
BE TIGHTLY SECURED
Part Identification - Numbering
Spline Connection Base Plate & Extrusion Connection
General Setup Instructions
- Read entire setup instruction manual prior to
unpacking parts and pieces.
- The setup instructions are created specifically
for this configuration.
- Setup instructions are laid out sequentially in
steps, including exploded views with detailed
explanation for assembly.
WARNING
Cleaning & Packing
- For Cleaning Metal, Plex, & Laminate Parts:
Use a MILD NON-ABRASIVE cleanser and
soft cloth/paper towel to clean all surfaces.
- Keep exhibit components away from heat
and prolonged sun exposure.
Heat and UV exposure will warp and
fade components.
- Retain all provided Packing Materials.
All provided packing materials are for
ease of repacking & component protection.
Disassembly
- For loss prevention, tighten all setscrews
and locks during disassembly
7A
Hex Tool - Essential for Assembly
Extrusion & Lock Connection Engaged Lock
LADDERS OR LIFTS
MAY BE REQUIRED
General Information

© 2018
Case 1 of 1
Order #XXXXX
Setup Hardware
Top View of Each Level
Level 1 Level 2 Level 3 Level 4
Front Insert
Internal Shelf
Counter Top
6 (Qty. 2)
5A
5
2 1
5A
5
4 3
5 (Qty. 2)
Assembled
Extrusions
Assembled
Extrusions
Case Packing