Sonoma 61SRR4503BIS User manual

Page 1/6
PART LIST QUANTITY
A1 PC
B1 PC
C1 PC
D1 PC
E6 PCS + 1 PC
F4 PCS + 1 PC
G10 PCS + 1 PC
H1 PC
I1 PC
FLAT WASHER
ALLEN WRENCH
LONG BOLT
(M6*40MM)
SHORT BOLT
(M6*20MM)
CUSHION
SAVE THESE INSTRUCTIONS
STYLE #: 61SRR4503BIS
FIGURE DESCRIPTION
ASSEMBLE ON A FLAT, PROTECTED SURFACE
LEFT SIDE
SONOMA BISCAY 5PC CHAT SET CHAIR ASSEMBLY INSTRUCTIONS
RIGHT SIDE
SEAT
BACK

Page 2/6
STYLE #: 61SRR4503BIS
STEP 2
A. ROTATE PREASSEMBLED UNIT UPSIDE DOWN.
B. CONNECT SEAT (C) TO BACK (D) WITH LONG BOLTS (E) AND FLAT
WASHERS (G). DO NOT TIGHTEN COMPLETELY.
C. CONNECT SEAT (C) TO LEFT SIDE (A) AND RIGHT SIDE (B) WITH SHORT
BOLTS (F) AND FLAT WASHERS (G) USING ALLEN WRENCH (H). DO NOT
TIGHTEN COMPLETELY.
D. TIGHTEN COMPLETELY ALL BOLTS (E & F) USING ALLEN WRENCH (H).
STEP 3
A. ROTATE CHAIR TO THE UPRIGHT POSITION.
B. PLACE CUSHION (I) ON SEAT (C).
C. ASSEMBLY IS COMPLETE.
ASSEMBLY INSTRUCTIONS (CONTINUED)
STEP 1
A. ATTACH BACK (D) TO LEFT SIDE (A) AND RIGHT SIDE (B) WITH LONG
BOLTS (E) AND FLAT WASHERS (G) USING ALLEN WRENCH (H). DO NOT
TIGHTEN COMPLETELY.
C
I

Page 3/6
PART LIST QUANTITY
A1 PC
B1 PC
C1 PC
D2 PCS + 1 PC
E4 PCS + 1 PC
F6 PCS + 1 PC
G1 PC
H1 PC
ASSEMBLE ON A FLAT, PROTECTED SURFACE
FRONT LEG
CUSHION
BACK LEG
TOP
FIGURE DESCRIPTION
SONOMA BISCAY 5PC CHAT SET OTTOMAN ASSEMBLY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
ALLEN WRENCH
SHORT BOLT
(M6*25MM)
STYLE #: 61SRR4503BIS
FLAT WASHER
LONG BOLT
(M6*35MM)

Page 4/6
STYLE #: 61SRR4503BIS
STEP 3
A. ROTATE OTTOMAN TO THE UPRIGHT POSITION.
B. PLACE CUSHION (H) ON OTTOMAN.
C. ASSEMBLY IS COMPLETE.
ASSEMBLY INSTRUCTIONS (CONTINUED)
STEP 1
A. PLACE TOP (C) UPSIDE DOWN ON A FLAT, PROTECTED SURFACE.
B. ATTACH TOP (C) TO FRONT LEG (A) AND BACK LEG (B) WITH SHORT
BOLTS (E) AND FLAT WASHERS (F) USING ALLEN WRENCH (G). DO NOT
TIGHTEN COMPLETELY.
-
STEP 2
A. CONNECT CENTER OF TOP (C) TO CENTER OF FRONT LEG (A) AND
BACK LEG (B) WITH LONG BOLTS (D) AND FLAT WASHERS (F) USING
ALLEN WRENCH (G). DO NOT TIGHTEN COMPLETELY.
B. TIGTHEN COMPLETELY ALL BOLTS (D & E) WITH
ALLEN WRENCH (G).
H

Page 5/6
PART LIST QUANTITY
A1 PC
B2 PCS
C2 PCS
D1 PC
E12 PCS + 1 PC
F12 PCS + 1 PC
G1 PC
SAVE THESE INSTRUCTIONS
SONOMA BISCAY 5PC CHAT SET TABLE ASSEMBLY INSTRUCTIONS
STYLE #: 61SRR4503BIS
ASSEMBLE ON A FLAT, PROTECTED SURFACE
FIGURE DESCRIPTION
TOP FRAME
 L E G 
LEG CONNECTOR
GLASS TOP
BOLT
(M6*15MM)
FLAT WASHER
ALLEN WRENCH

Page 6/6
WEIGHT LIMIT
CHAIR: 300 LBS; OTTOMAN: 150 LBS; SIDE TABLE: 50 LBS
CARE AND CLEANING
FRAME: WIPE CLEAN WITH A SOFT, DAMP CLOTH AS NEEDED.
CUSHION: SPOT CLEAN WITH A DAMP, CLEAN CLOTH AS NEEDED.
DO NOT STAND OR CLIMB ON THE CHAIR OR OTTOMAN.
DO NOT SIT, STAND, OR CLIMB ON THE TABLE.
WARRANTY
1 YEAR LIMITED WARRANTY. COMMERCIAL USE, ACTS OF NATURE, FIRE, FREEZING, ABUSIVE USE,
DISCOLORATION OR FADING OF THE FINISH OR FABRICS AS RESULT OF CHEMICALS OR SPILLS IS NOT
COVERED. PROOF OF PURCHASE (DATED RECEIPT) IS REQUIRED FOR WARRANTY CLAIMS. WE
RESERVE THE RIGHT TO MAKE SUBSTITUTIONS WITH SIMILAR MERCHANDISE.
STEP 2
A. ATTACH LEG CONNECTERS (C) TO LEGS (B) WITH BOLTS (E) AND FLAT
WASHERS (F) USING ALLEN WRENCH (G). DO NOT TIGHTEN
COMPLETELY.
B. TIGHTEN COMPLETELY ALL BOLTS (E) WITH ALLEN WRENCH (G).
STEP 3
A. ROTATE ASSEMBLED UNIT TO THE UPRIGHT POSITION.
B. PLACE GLASS TOP (D) ONTO TOP FRAME (A).
C. ADJUST LEVERLS ON BOTTOM SO THE TABLE IS STABLE ON THE
FLOOR.
D. ASSEMBLY IS COMPLETE.
** WE RECOMMEND THAT YOU SAVE THE ALLEN WRENCH (G) AND PERIODICALLY TIGHTEN ALL BOLTS.
ASSEMBLY INSTRUCTIONS (CONTINUED)
STYLE #: 61SRR4503BIS
STEP 1
A. PLACE TOP FRAME (A) UPSIDE DOWN ON A FLAT, PROTECTED
SURFACE.
B. ATTACH LEGS (B) TO TOP FRAME (A) WITH BOLTS (E) AND FLAT
WASHERS (F) USING ALLEN WRENCH (G). DO NOT TIGHTEN
COMPLETELY.
D