vita Raised Planter Trellis User manual

Check Box for These Contents
In the event of missing or defective parts please call our customer service department at 1 800 282 9346
(Mon. to Fri. 8:00 AM to 5:00 PM EST).
1.
Posts (2)
2. Top and Bottom Rails ( 2) - 1.5” x 1.5“ x 35.75”
3. Horizontal Spindles (3) - 1.5” x .875“ x 31”
4. Vertical Spindles (5) - 1.5“ x .25” x 21“
5. 1”Self-Auguring Stainless Steel Screw (4)
Tools You Will Need
• Cordless Drill
General Information
•Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e.shipping box) to avoid scratching.
• We recommend an area approx 5’x 8’for unobstructed assembling.
• You should not need to use excessive force when assembling component.
The Raised Planter Trellis*
Please read through before starting assembly.
AS SEM BLY IN STR UCT ION S
1
IMPORTANT: CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS.
Ver 1.1/121120
   
     
 
 
5
Not to Scale
1
2
4
3
*The Raised Planter Trellis is designed to mount on to our 24” x 36” White Raised Planter Box (sold separately) as shown above.
www.wearevita.com

2
www.wearevita.com
1
Align and insert the five vertical spindles into the horizontal
spindle as shown. Note the spacing between the horizontal
rails are to match that of the posts.
Align and insert the top and bottom rails as shown.
Insert the lattice from step 2 into the routed holes on the
posts as shown. Press down on each of the horizontal rails
to lock them into place.
1
2
3
4
STEP ON E
23
NOTE: There are locking tabs located at the ends of the
horizontal rails. Once inserted and pushed into the routed
holes, they will lock into place.
4
5
5
STEP T WO
Insert the trellis from Step One above onto the 24” x 36”
White Raised Planter as shown. Place the post caps from the
planter box onto the top of the trellis.
Secure the trellis into place using the four provided screws
at locations shown below:
North America Toll Free Phone: [phone]