3
Power Supply
•
•ViTiny VT101 includes three
Ni-MH rechargeable batteries.
•ViTiny VT101 can run from
batteries or from the USB cable.
The Ni-MH batteries will recharge
automatically, without removal of the
batteries , if you use the USB
connect ViTiny VT101 to y
c m
cable to
our
o puter or the USB power
adapter.
•When the recharger is in the
power-off mode, the white LEDs
will flash twice every three seconds.
If the recharger is in power-on
mode, the icon will be shown on screen.
After completely charging in the power-off mode, the white•
LEDs will flash once every three seconds. After completely
charging in the power-on mode, the icon will be shown
on screen.
Recharge Ni-MH batteries every few months, even if the•
system is not used to maintain battery strength, this is
suggested to extend longevity.
•For lengthy storage periods, remove batteries to prevent
damage due to battery leakage/ discharge.
ViTiny VT101 may also use alkaline batteries. Do not m•ix
battery types in use and do not recharge alkaline batteries.
Accessories
ower-adaptP er: Plugs into wall socket and into USB cable.
Will accept 100V ~ 240VAC and output 5V DC.
Mini-USB cable: Used for data communications and battery
charging.
Settings
f.
White Balance: To turn on/off Auto- White correction.
Factory Default: Returns to all original settings.
Power Saving: To set the time
period for automatic power shut of
Status Display: To turn on/off
display of screen status .
Brightness: To set 4 phases of
ED brightness .L
Delete all pictures: To delete all pictures in memory.
ImageEffects
Gray (G): To remove color and create a gray-scale image for
easier image discrimination.
Inverse (I): To reverse color and/or grayscale to help highlight
some given features.
