Vivo DESK-V100M User manual

Manual Height Adjustable Desk Frame
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v100m
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: DESK-V100M

2 3
STEP 2
Insert the sync rod (B) into the hex socket on the liing column. Place the second column (C) onto the
desk board and insert the other end of the sync rod into the column.
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
ASSEMBLY STEPS
WARNING!
A (x1)
Desktop
STEP 1
Place desk board (A) upside down on a at surface. Use the shipping blanket from packaging for
protection. Assemble one liing column (C) to the desk board using x3 Phillips head screws (S-B) and
tighten with a screwdriver.
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
88lbs
39.92kg
B (x1)
Sync Rod
D (x1)
Crossbar
E (x1)
Crank
S-A (x4)
Hex Head
Screw
S-C (x1)
Allen Wrench
C (x2)
Liing Column
S-B (x6)
Philips Head
Screw
Level
_
`

4 5
STEP 3 STEP 4
Assemble the crossbar (D) to the back of the liing columns using hex head screws (S-A) and tighten
with the Allen wrench (S-C).
Secure the second liing column to the desk board using x3 Phillips head screws (S-B) and tighten
with a screwdriver.
S-B
Phillips
Screwdriver
D

6 7
STEP 5
Insert the crank (E) into the hex socket of the liing column.
E
3
Figure 1: Turn the crank to raise or lower the
Figure 2: Store the crank in the front of the desk
support bracket on the column as shown.
Figure 3: Turn the foot pads to adjust the desk
level.
Figure 4: Use a bubble level to ensure the desk is
sitting perfectly level.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.

Last Updated: 10/22/2018
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654